From: Michal Simek Date: Mon, 6 Nov 2023 11:56:47 +0000 (+0100) Subject: riscv: Add support for AMD/Xilinx MicroBlaze V X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7576ab2facae;p=u-boot.git riscv: Add support for AMD/Xilinx MicroBlaze V MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. It is hardware compatible with classic MicroBlaze processor. The patch contains initial wiring and configuration for initial HW design with memory, cpu, interrupt controller, timers and uartlite console (interrupt controller is listed but U-Boot is not using it). Provided DT is just describing one configuration and should be taken only as example. Signed-off-by: Michal Simek Reviewed-by: Leo Yu-Chi Liang Reviewed-by: Padmarao Begari --- diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 6d0d812ddb..67126d96af 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -39,6 +39,9 @@ config TARGET_TH1520_LPI4A bool "Support Sipeed's TH1520 Lichee PI 4A Board" select SYS_CACHE_SHIFT_6 +config TARGET_XILINX_MBV + bool "Support AMD/Xilinx MicroBlaze V" + endchoice config SYS_ICACHE_OFF @@ -82,6 +85,7 @@ source "board/sifive/unmatched/Kconfig" source "board/sipeed/maix/Kconfig" source "board/starfive/visionfive2/Kconfig" source "board/thead/th1520_lpi4a/Kconfig" +source "board/xilinx/mbv/Kconfig" # platform-specific options below source "arch/riscv/cpu/andesv5/Kconfig" diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index be6c8a4227..b05bb5607f 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -9,6 +9,8 @@ dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb +dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb + include $(srctree)/scripts/Makefile.dts targets += $(dtb-y) diff --git a/arch/riscv/dts/xilinx-mbv32.dts b/arch/riscv/dts/xilinx-mbv32.dts new file mode 100644 index 0000000000..6a6b8b694b --- /dev/null +++ b/arch/riscv/dts/xilinx-mbv32.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for AMD MicroBlaze V + * + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "AMD MicroBlaze V 32bit"; + compatible = "amd,mbv"; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <102000000>; + cpu_0: cpu@0 { + compatible = "amd,mbv32", "riscv"; + device_type = "cpu"; + reg = <0>; + riscv,isa = "rv32imafdc"; + i-cache-size = <32768>; + d-cache-size = <32768>; + clock-frequency = <102000000>; + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; + + clk102: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <102000000>; + }; + + axi: axi { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + bootph-all; + + axi_intc: interrupt-controller@41200000 { + compatible = "xlnx,xps-intc-1.00.a"; + reg = <0x41200000 0x1000>; + interrupt-controller; + interrupt-parent = <&cpu0_intc>; + #interrupt-cells = <2>; + kind-of-intr = <0>; + }; + + xlnx_timer0: timer@41c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x41c00000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <1 2>; + bootph-all; + xlnx,one-timer-only = <0>; + clock-names = "s_axi_aclk"; + clocks = <&clk102>; + }; + + xlnx_timer1: timer@41c20000 { + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x41c20000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <0 2>; + xlnx,one-timer-only = <0>; + clock-names = "s_axi_aclk"; + clocks = <&clk102>; + }; + + uart0: serial@40600000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + reg = <0x40600000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <2 2>; + bootph-all; + clocks = <&clk102>; + current-speed = <115200>; + xlnx,data-bits = <8>; + xlnx,use-parity = <0>; + }; + }; +}; diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 4f0776e8bd..843198fa0d 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -51,10 +51,11 @@ config XILINX_OF_BOARD_DTB_ADDR config BOOT_SCRIPT_OFFSET hex "Boot script offset" - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE default 0x3E80000 if ARCH_ZYNQMP default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET + default 0 if TARGET_XILINX_MBV help Specifies distro boot script offset in NAND/QSPI/NOR flash. diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 9309b07126..12a877c715 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -652,6 +652,11 @@ int embedded_dtb_select(void) #endif #if defined(CONFIG_LMB) + +#ifndef MMU_SECTION_SIZE +#define MMU_SECTION_SIZE (1 * 1024 * 1024) +#endif + phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { phys_size_t size; diff --git a/board/xilinx/mbv/Kconfig b/board/xilinx/mbv/Kconfig new file mode 100644 index 0000000000..4bc9f72c54 --- /dev/null +++ b/board/xilinx/mbv/Kconfig @@ -0,0 +1,28 @@ +if TARGET_XILINX_MBV + +config SYS_BOARD + default "mbv" + +config SYS_VENDOR + default "xilinx" + +config SYS_CPU + default "generic" + +config SYS_CONFIG_NAME + default "xilinx_mbv" + +config TEXT_BASE + default 0x80000000 if !RISCV_SMODE + default 0x80400000 if RISCV_SMODE && ARCH_RV32I + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select GENERIC_RISCV + imply BOARD_LATE_INIT + imply CMD_SBI + imply CMD_PING + +source "board/xilinx/Kconfig" + +endif diff --git a/board/xilinx/mbv/MAINTAINERS b/board/xilinx/mbv/MAINTAINERS new file mode 100644 index 0000000000..445654fe74 --- /dev/null +++ b/board/xilinx/mbv/MAINTAINERS @@ -0,0 +1,7 @@ +XILINX MicroBlaze V BOARD +M: Michal Simek +S: Maintained +F: arch/riscv/dts/xilinx-mbv* +F: board/xilinx/mbv/ +F: configs/xilinx_mbv* +F: include/configs/xilinx_mbv.h diff --git a/board/xilinx/mbv/Makefile b/board/xilinx/mbv/Makefile new file mode 100644 index 0000000000..e2fc0c6971 --- /dev/null +++ b/board/xilinx/mbv/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# (C) Copyright 2023, Advanced Micro Devices, Inc. + +obj-y += board.o diff --git a/board/xilinx/mbv/board.c b/board/xilinx/mbv/board.c new file mode 100644 index 0000000000..ccf4395d6a --- /dev/null +++ b/board/xilinx/mbv/board.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek + */ + +int board_init(void) +{ + return 0; +} diff --git a/configs/xilinx_mbv32_defconfig b/configs/xilinx_mbv32_defconfig new file mode 100644 index 0000000000..2689495057 --- /dev/null +++ b/configs/xilinx_mbv32_defconfig @@ -0,0 +1,30 @@ +CONFIG_RISCV=y +CONFIG_TEXT_BASE=0x21200000 +CONFIG_SYS_MALLOC_LEN=0x800000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" +CONFIG_DEBUG_UART_BASE=0x40600000 +CONFIG_DEBUG_UART_CLOCK=1000000 +CONFIG_SYS_CLK_FREQ=100000000 +CONFIG_BOOT_SCRIPT_OFFSET=0x0 +CONFIG_SYS_LOAD_ADDR=0x80200000 +CONFIG_DEBUG_UART=y +CONFIG_TARGET_XILINX_MBV=y +CONFIG_FIT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_CMD_MII is not set +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_MTD=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_XILINX_UARTLITE=y +CONFIG_XILINX_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/configs/xilinx_mbv32_smode_defconfig b/configs/xilinx_mbv32_smode_defconfig new file mode 100644 index 0000000000..c724d1bad7 --- /dev/null +++ b/configs/xilinx_mbv32_smode_defconfig @@ -0,0 +1,32 @@ +CONFIG_RISCV=y +CONFIG_TEXT_BASE=0x21200000 +CONFIG_SYS_MALLOC_LEN=0x800000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" +CONFIG_DEBUG_UART_BASE=0x40600000 +CONFIG_DEBUG_UART_CLOCK=1000000 +CONFIG_SYS_CLK_FREQ=100000000 +CONFIG_BOOT_SCRIPT_OFFSET=0x0 +CONFIG_SYS_LOAD_ADDR=0x80200000 +CONFIG_TARGET_XILINX_MBV=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_CMD_MII is not set +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_MTD=y +CONFIG_DEBUG_UART_UARTLITE=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_XILINX_UARTLITE=y +# CONFIG_RISCV_TIMER is not set +CONFIG_XILINX_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/include/configs/xilinx_mbv.h b/include/configs/xilinx_mbv.h new file mode 100644 index 0000000000..dba398aeec --- /dev/null +++ b/include/configs/xilinx_mbv.h @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek + */