From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 22 Mar 2009 09:22:34 +0000 (+0100) Subject: at91sam9/at91cap: move nand drivers to drivers/mtd/nand X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=74c076d6c33d6d42ab065541a38383587879e7b7;p=u-boot.git at91sam9/at91cap: move nand drivers to drivers/mtd/nand Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile index 60c4304c1c..73187fb70d 100644 --- a/board/afeb9260/Makefile +++ b/board/afeb9260/Makefile @@ -31,7 +31,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += afeb9260.o COBJS-y += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index ba60861f1e..024db2bbe0 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -72,10 +72,10 @@ static void afeb9260_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #ifdef CONFIG_MACB diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index d2536491b3..2496f9bd48 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91cap9adk.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 46a4fce5d2..e8025e7aed 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -133,7 +133,7 @@ static void at91cap9_nand_hw_init(void) /* RDY/BSY is not connected */ /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c deleted file mode 100644 index cc2263b023..0000000000 --- a/board/atmel/at91cap9adk/nand.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91cap9adk_nand_hwcontrol; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index 2e65434115..aaa324062a 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9260ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index d89f2475c6..ae00c5347e 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -76,10 +76,10 @@ static void at91sam9260ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c deleted file mode 100644 index c5ac634aab..0000000000 --- a/board/atmel/at91sam9260ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC13); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index edeb648211..d9b3a79536 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9261ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index d8f006c54a..bae4092bb6 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -76,10 +76,10 @@ static void at91sam9261ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC15, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c deleted file mode 100644 index 06395ee215..0000000000 --- a/board/atmel/at91sam9261ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 22) /* our ALE is AD22 */ -#define MASK_CLE (1 << 21) /* our CLE is AD21 */ - -static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9261ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC15); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol; - nand->dev_ready = at91sam9261ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index d0d42726ea..013ed215f9 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9263ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 9110e9e6ac..1d5284592e 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -80,10 +80,10 @@ static void at91sam9263ek_nand_hw_init(void) 1 << AT91SAM9263_ID_PIOCDE); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PA22, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c deleted file mode 100644 index 3c247f6e5f..0000000000 --- a/board/atmel/at91sam9263ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9263ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PA22); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol; - nand->dev_ready = at91sam9263ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile index 3dbee27cfb..92a5a2b988 100644 --- a/board/atmel/at91sam9rlek/Makefile +++ b/board/atmel/at91sam9rlek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9rlek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ce10cdf074..908b9c801b 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -76,10 +76,10 @@ static void at91sam9rlek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PD17, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PB6, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c deleted file mode 100644 index 625f6ec9bc..0000000000 --- a/board/atmel/at91sam9rlek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PB6, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9rlek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PD17); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol; - nand->dev_ready = at91sam9rlek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 5974d7768d..03b0028e7c 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -35,6 +35,7 @@ COBJS-y += nand_ids.o COBJS-y += nand_util.o endif +COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o diff --git a/board/afeb9260/nand.c b/drivers/mtd/nand/atmel_nand.c similarity index 72% rename from board/afeb9260/nand.c rename to drivers/mtd/nand/atmel_nand.c index c5ac634aab..40002be417 100644 --- a/board/afeb9260/nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -25,33 +25,29 @@ */ #include -#include +#include #include #include #include -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, +static void at91_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd->priv; if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); + IO_ADDR_W &= ~(CONFIG_SYS_NAND_MASK_ALE + | CONFIG_SYS_NAND_MASK_CLE); if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; + IO_ADDR_W |= CONFIG_SYS_NAND_MASK_CLE; if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; + IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); + at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, + !(ctrl & NAND_NCE)); this->IO_ADDR_W = (void *) IO_ADDR_W; } @@ -59,10 +55,12 @@ static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, writeb(cmd, this->IO_ADDR_W); } -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) +#ifdef CONFIG_SYS_NAND_READY_PIN +static int at91_nand_ready(struct mtd_info *mtd) { - return at91_get_gpio_value(AT91_PIN_PC13); + return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN); } +#endif int board_nand_init(struct nand_chip *nand) { @@ -70,8 +68,10 @@ int board_nand_init(struct nand_chip *nand) #ifdef CONFIG_SYS_NAND_DBW_16 nand->options = NAND_BUSWIDTH_16; #endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; + nand->cmd_ctrl = at91_nand_hwcontrol; +#ifdef CONFIG_SYS_NAND_READY_PIN + nand->dev_ready = at91_nand_ready; +#endif nand->chip_delay = 20; return 0; diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9eed3423cc..33a67ca830 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -97,9 +97,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index d8e6a29f6e..7e7f124b98 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -122,8 +122,16 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#endif /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index e348833346..2661563627 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,9 +105,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index b119d96d53..752d7e9ccd 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -117,9 +117,18 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD22 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 22) +/* our CLE is AD21 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 21) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 +#endif /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 979d7a38c9..dd500caf6c 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -129,9 +129,18 @@ #endif /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 +#endif /* Ethernet */ #define CONFIG_MACB 1 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5d837a07af..7a4039c55a 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -110,9 +110,18 @@ #define CONFIG_SYS_NO_FLASH 1 /* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 +#endif /* Ethernet - not present */