From: Sergey Temerkhanov Date: Wed, 14 Oct 2015 16:55:50 +0000 (-0700) Subject: armv8: cavium: Add ThunderX 88xx board definition X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=746f985add5244c00a5dbb19bc67ceab52566a91;p=u-boot.git armv8: cavium: Add ThunderX 88xx board definition This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov Signed-off-by: Radha Mohan Chintakuntla [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dd9cac91e7..33c8411e3e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -716,6 +716,10 @@ config ARCH_ROCKCHIP select CPU_V7 select DM +config TARGET_THUNDERX_88XX + bool "Support ThunderX 88xx" + select OF_CONTROL + endchoice source "arch/arm/mach-at91/Kconfig" @@ -784,6 +788,7 @@ source "board/bluegiga/apx4devkit/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" +source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" diff --git a/arch/arm/dts/thunderx-88xx.dtsi b/arch/arm/dts/thunderx-88xx.dtsi index 086652ffd2..6e9230b035 100644 --- a/arch/arm/dts/thunderx-88xx.dtsi +++ b/arch/arm/dts/thunderx-88xx.dtsi @@ -348,7 +348,7 @@ interrupts = <1 21 4>; clocks = <&refclk50mhz>; clock-names = "apb_pclk"; - flags = <1>; + uboot,skip-init; }; uaa1: serial@87e0,25000000 { @@ -357,7 +357,7 @@ interrupts = <1 22 4>; clocks = <&refclk50mhz>; clock-names = "apb_pclk"; - flags = <1>; + uboot,skip-init; }; }; }; diff --git a/board/cavium/thunderx/Kconfig b/board/cavium/thunderx/Kconfig new file mode 100644 index 0000000000..927d8765d6 --- /dev/null +++ b/board/cavium/thunderx/Kconfig @@ -0,0 +1,27 @@ +if TARGET_THUNDERX_88XX + +config SYS_CPU + string + default "armv8" + +config SYS_BOARD + string + default "thunderx" + +config SYS_VENDOR + string + default "cavium" + +config SYS_CONFIG_NAME + string + default "thunderx_88xx" + +config CMD_ATF + bool "Enable ATF query commands" + default y + help + Enable vendor specific ATF query commands such as SPI and SD/MMC + devices access, low level environment query, boot device layout + and node count. + +endif diff --git a/board/cavium/thunderx/MAINTAINERS b/board/cavium/thunderx/MAINTAINERS new file mode 100644 index 0000000000..c84d3b553d --- /dev/null +++ b/board/cavium/thunderx/MAINTAINERS @@ -0,0 +1,6 @@ +THUNDERX BOARD +M: Sergey Temerkhanov +S: Maintained +F: board/cavium/thunderx/ +F: include/configs/thunderx_88xx.h +F: configs/thunderx_88xx_defconfig diff --git a/board/cavium/thunderx/Makefile b/board/cavium/thunderx/Makefile new file mode 100644 index 0000000000..306044a64a --- /dev/null +++ b/board/cavium/thunderx/Makefile @@ -0,0 +1,8 @@ +# +# +# (C) Copyright 2014, Cavium Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := thunderx.o diff --git a/board/cavium/thunderx/thunderx.c b/board/cavium/thunderx/thunderx.c new file mode 100644 index 0000000000..486374e982 --- /dev/null +++ b/board/cavium/thunderx/thunderx.c @@ -0,0 +1,75 @@ +/** + * (C) Copyright 2014, Cavium Inc. + * + * SPDX-License-Identifier: GPL-2.0+ +**/ + +#include +#include +#include +#include + +#if !CONFIG_IS_ENABLED(OF_CONTROL) +#include +#include + +static const struct pl01x_serial_platdata serial0 = { + .base = CONFIG_SYS_SERIAL0, + .type = TYPE_PL011, + .clock = 0, + .skip_init = true, +}; + +U_BOOT_DEVICE(thunderx_serial0) = { + .name = "serial_pl01x", + .platdata = &serial0, +}; + +static const struct pl01x_serial_platdata serial1 = { + .base = CONFIG_SYS_SERIAL1, + .type = TYPE_PL011, + .clock = 0, + .skip_init = true, +}; + +U_BOOT_DEVICE(thunderx_serial1) = { + .name = "serial_pl01x", + .platdata = &serial1, +}; +#endif + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + return 0; +} + +int timer_init(void) +{ + return 0; +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ +} + +/* + * Board specific ethernet initialization routine. + */ +int board_eth_init(bd_t *bis) +{ + int rc = 0; + + return rc; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + printf("DEBUG: PCI Init TODO *****\n"); +} +#endif diff --git a/configs/thunderx_88xx_defconfig b/configs/thunderx_88xx_defconfig new file mode 100644 index 0000000000..b7078e0390 --- /dev/null +++ b/configs/thunderx_88xx_defconfig @@ -0,0 +1,24 @@ +CONFIG_ARM=y +CONFIG_TARGET_THUNDERX_88XX=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="thunderx-88xx" +CONFIG_SYS_EXTRA_OPTIONS="ARM64" +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="ThunderX_88XX> " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +CONFIG_DM=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_PL011=y +CONFIG_DEBUG_UART_BASE=0x87e024000000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_REGEX=y diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h new file mode 100644 index 0000000000..9bd26dc7aa --- /dev/null +++ b/include/configs/thunderx_88xx.h @@ -0,0 +1,143 @@ +/** + * (C) Copyright 2014, Cavium Inc. + * + * SPDX-License-Identifier: GPL-2.0+ +**/ + +#ifndef __THUNDERX_88XX_H__ +#define __THUNDERX_88XX_H__ + +#define CONFIG_REMAKE_ELF + +#define CONFIG_THUNDERX + +#define CONFIG_SYS_64BIT + +#define CONFIG_SYS_NO_FLASH + + +#define CONFIG_IDENT_STRING \ + " for Cavium Thunder CN88XX ARM v8 Multi-Core" +#define CONFIG_BOOTP_VCI_STRING "Diagnostics" + +#define MEM_BASE 0x00500000 + +#define CONFIG_COREID_MASK 0xffffff + +#define CONFIG_SYS_FULL_VA + +#define CONFIG_SYS_MEM_MAP {{0x000000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_NORMAL) | \ + PTL2_BLOCK_NON_SHARE}, \ + {0x800000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_DEVICE_NGNRNE) | \ + PTL2_BLOCK_NON_SHARE}, \ + {0x840000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_DEVICE_NGNRNE) | \ + PTL2_BLOCK_NON_SHARE}, \ + } + +#define CONFIG_SYS_MEM_MAP_SIZE 3 + +#define CONFIG_SYS_VA_BITS 48 +#define CONFIG_SYS_PTL2_BITS 42 +#define CONFIG_SYS_BLOCK_SHIFT 29 +#define CONFIG_SYS_PTL1_ENTRIES 64 +#define CONFIG_SYS_PTL2_ENTRIES 8192 + +#define CONFIG_SYS_PGTABLE_SIZE \ + ((CONFIG_SYS_PTL1_ENTRIES + \ + CONFIG_SYS_MEM_MAP_SIZE * CONFIG_SYS_PTL2_ENTRIES) * 8) +#define CONFIG_SYS_TCR_EL1_IPS_BITS (5UL << 32) +#define CONFIG_SYS_TCR_EL2_IPS_BITS (5 << 16) +#define CONFIG_SYS_TCR_EL3_IPS_BITS (5 << 16) + +/* Link Definitions */ +#define CONFIG_SYS_TEXT_BASE 0x00500000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT + +/* SMP Spin Table Definitions */ +#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ + + +#define CONFIG_SYS_MEMTEST_START MEM_BASE +#define CONFIG_SYS_MEMTEST_END (MEM_BASE + PHYS_SDRAM_1_SIZE) + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* PL011 Serial Configuration */ + +#define CONFIG_PL01X_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_CONS_INDEX 1 + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE (0x801000000000) +#define GICR_BASE (0x801000002000) +#define CONFIG_SYS_SERIAL0 0x87e024000000 +#define CONFIG_SYS_SERIAL1 0x87e025000000 + +#define CONFIG_BAUDRATE 115200 + +/* Command line configuration */ +#define CONFIG_MENU + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (MEM_BASE) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE (0x80000000-MEM_BASE) /* 2048 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Initial environment variables */ +#define UBOOT_IMG_HEAD_SIZE 0x40 +/* C80000 - 0x40 */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr=08007ffc0\0" \ + "fdt_addr=0x94C00000\0" \ + "fdt_high=0x9fffffff\0" + +#define CONFIG_BOOTARGS \ + "console=ttyAMA0,115200n8 " \ + "earlycon=pl011,0x87e024000000 " \ + "debug maxcpus=48 rootwait rw "\ + "root=/dev/sda2 coherent_pool=16M" +#define CONFIG_BOOTDELAY 5 + +/* Do not preserve environment */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x1000 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_MAXARGS 64 /* max command args */ +#define CONFIG_NO_RELOCATION 1 +#define CONFIG_LIB_RAND +#define PLL_REF_CLK 50000000 /* 50 MHz */ +#define NS_PER_REF_CLK_TICK (1000000000/PLL_REF_CLK) + +#endif /* __THUNDERX_88XX_H__ */