From: Wolfgang Denk Date: Tue, 27 Feb 2007 13:26:04 +0000 (+0100) Subject: Minor code cleanup. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=743571145b37182757d4e688a77860b36ee77573;p=u-boot.git Minor code cleanup. --- diff --git a/CHANGELOG b/CHANGELOG index ff386c9c3a..6e26105c2a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,443 @@ +commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 +Author: Sergei Poselenov +Date: Tue Feb 27 12:40:16 2007 +0300 + + MCC200 update - add LCD Progress Indicator + +commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 +Author: Stefan Roese +Date: Thu Feb 22 07:43:34 2007 +0100 + + [PATCH] get_dev() now unconditionally uses manual relocation + + Since the relocation fix is not included yet and we're not sure how + it will be added, this patch removes code that required relocation + to be fixed for now. + + Signed-off-by: Stefan Roese + +commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b +Author: Stefan Roese +Date: Thu Feb 22 07:40:23 2007 +0100 + + [PATCH] Change systemace driver to select 8 & 16bit mode + + As suggested by Grant Likely this patch enables the Xilinx SystemACE + driver to select 8 or 16bit mode upon startup. + + Signed-off-by: Stefan Roese + +commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 +Author: Haiying Wang +Date: Wed Feb 21 16:52:31 2007 +0100 + + [PATCH v3] Add sync to ensure flash_write_cmd is fully finished + + Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command + is fully finished. The sync() is defined in each CPU's io.h file. For + those CPUs which do not need sync for now, a dummy sync() is defined in + their io.h as well. + + Signed-off-by: Haiying Wang + +commit da04995c7dc6772013a9a0dc5c767f190c402478 +Author: Stefan Roese +Date: Wed Feb 21 13:44:34 2007 +0100 + + [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) + + Signed-off-by: Stefan Roese + +commit 751bb57107d78978ae08e697c3deba816f5be091 +Author: Stefan Roese +Date: Tue Feb 20 13:21:57 2007 +0100 + + [PATCH] Fix relocation problem with "new" get_dev() function + + This patch enables the "new" get_dev() function for block devices + introduced by Grant Likely to be used on systems that still suffer + from the relocation problems (manual relocation neede because of + problems with linker script). + + Hopefully we can resolve this relocation issue soon for all platform + so we don't need this additional code anymore. + + Signed-off-by: Stefan Roese + +commit d93e2212f962668b3dce091ff5edc33f2347fe37 +Author: Stefan Roese +Date: Tue Feb 20 13:17:42 2007 +0100 + + [PATCH] Update SystemACE driver for 16bit access + + This patch removes some problems when the Xilinx SystemACE driver + is used with 16bit access on an big endian platform (like the + AMCC Katmai). + + Signed-off-by: Stefan Roese + +commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 +Author: Stefan Roese +Date: Tue Feb 20 13:15:40 2007 +0100 + + [PATCH] Clean up Katmai (440SPe) linker script + + Signed-off-by: Stefan Roese + +commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f +Author: Stefan Roese +Date: Tue Feb 20 10:57:08 2007 +0100 + + [PATCH] Add support for the AMCC Katmai (440SPe) eval board + + Signed-off-by: Stefan Roese + +commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 +Author: Stefan Roese +Date: Tue Feb 20 10:51:26 2007 +0100 + + [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT + + This patch switches to the desired I2C bus when the date/dtt + commands are called. This can be configured using the + CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. + + Signed-off-by: Stefan Roese + +commit 4037ed3b63923cfcec27f784a89057c3cbabcedb +Author: Stefan Roese +Date: Tue Feb 20 10:43:34 2007 +0100 + + [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support + + This patch adds support for the DDR2 controller used on the + 440SP and 440SPe. It is tested on the Katmai (440SPe) eval + board and works fine with the following DIMM modules: + + - Corsair CM2X512-5400C4 (512MByte per DIMM) + - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) + - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) + + This patch also adds the nice functionality to dynamically + create the TLB entries for the SDRAM (tlb.c). So we should + never run into such problems with wrong (too short) TLB + initialization again on these platforms. + + Signed-off-by: Stefan Roese + +commit 36d830c9830379045f5daa9f542ac1c990c70068 +Author: Stefan Roese +Date: Tue Feb 20 10:35:42 2007 +0100 + + [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files + + Since the existing 4xx SPD SDRAM initialization routines for the + 405 SDRAM controller and the 440 DDR controller don't have much in + common this patch splits both drivers into different files. + + This is in preparation for the 440 DDR2 controller support (440SP/e). + + Signed-off-by: Stefan Roese + +commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 +Author: Stefan Roese +Date: Tue Feb 20 10:27:08 2007 +0100 + + [PATCH] PPC4xx: Add support for multiple I2C busses + + This patch adds support for multiple I2C busses on the PPC4xx + platforms. Define CONFIG_I2C_MULTI_BUS in the board config file + to make use of this feature. + + It also merges the 405 and 440 i2c header files into one common + file 4xx_i2c.h. + + Also the 4xx i2c reset procedure is reworked since I experienced + some problems with the first access on the 440SPe Katmai board. + + Signed-off-by: Stefan Roese + +commit eb867a76238fb38e952c37871b16d0d7fd61c95f +Author: Grant Likely +Date: Tue Feb 20 09:05:45 2007 +0100 + + [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers + + Block device read/write is anonymous data; there is no need to use a + typed pointer. void * is fine. Also add a hook for block_read functions + + Signed-off-by: Grant Likely + +commit 53758fa20e935cc87eeb0519ed365df753a6f289 +Author: Grant Likely +Date: Tue Feb 20 09:05:38 2007 +0100 + + [PATCH 8_9] Add block_write hook to block_dev_desc_t + + Preparation for future patches which support block device writing + + Signed-off-by: Grant Likely + +commit f4852ebe6ca946a509667eb68be42026f837be76 +Author: Grant Likely +Date: Tue Feb 20 09:05:31 2007 +0100 + + [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros + + Register read/write does not need to be wrapped in a full function. The + patch replaces them with macros. + + Signed-off-by: Grant Likely + +commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 +Author: Grant Likely +Date: Tue Feb 20 09:05:23 2007 +0100 + + [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c + + The code in this file is not a command; it is a device driver. Put it in + the correct place. There are zero functional changes in this patch, it + only moves the file. + + Signed-off-by: Grant Likely + +commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 +Author: Grant Likely +Date: Tue Feb 20 09:05:16 2007 +0100 + + [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) + + This patch is in preparation of additional changes to the sysace driver. + May as well take this opportunity to fixup the inconsistent whitespace since + this file is about to undergo major changes anyway. + + There are zero functional changes in this patch. It only cleans up the + the whitespace. + + Signed-off-by: Grant Likely + +commit 80ba981d940471fe7e539e64fa3d2bd80002beda +Author: Grant Likely +Date: Tue Feb 20 09:05:07 2007 +0100 + + [PATCH 4_4] Remove local implementation of isprint() in ft_build.c + + isprint is already defined in ctype.c + + Signed-off-by: Grant Likely + +commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 +Author: Grant Likely +Date: Tue Feb 20 09:05:00 2007 +0100 + + [PATCH 3_9] Move buffer print code from md command to common function + + Printing a buffer is a darn useful thing. Move the buffer print code + into print_buffer() in lib_generic/ + + Signed-off-by: Grant Likely + +commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a +Author: Grant Likely +Date: Tue Feb 20 09:04:52 2007 +0100 + + [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets + + Change the xilinx device drivers and board code to include config.h + instead of xparameters.h directly. config.h always includes the + correct xparameters file. This change reduces the posibility of + including the wrong file when adding a new xilinx board port + + Signed-off-by: Grant Likely + +commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 +Author: Grant Likely +Date: Tue Feb 20 09:04:34 2007 +0100 + + [PATCH 1_4] Merge common get_dev() routines for block devices + + Each of the filesystem drivers duplicate the get_dev routine. This change + merges them into a single function in part.c + + Signed-off-by: Grant Likely + +commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 +Author: Wolfgang Denk +Date: Mon Feb 19 23:09:51 2007 +0100 + + MCC200: Software Updater: allow both "ramdisk" and "filesystem" types + as root file system images. + +commit 489c696ae7211218961d159e43e722d74c36fcbc +Author: Sergei Poselenov +Date: Wed Feb 14 14:30:28 2007 +0300 + + MCC200: Extensions to Software Update Mechanism + + Update / extend Software Update Mechanism for MCC200 board: + + - Add support for rootfs image added. The environment variables + "rootfs_st" and "rootfs_nd" can be used to override the default + values of the image start and end. + - Remove excessive key check code. + - Code cleanup. + +commit 4be23a12f23f1372634edc3215137b09768b7949 +Author: Stefan Roese +Date: Mon Feb 19 08:23:15 2007 +0100 + + [PATCH] Update Sequoia EBC configuration (NOR FLASH) + + As spotted by Matthias Fuchs, the READY input should not be + enabled for the NOR FLASH on the Sequoia board. + + Signed-off-by: Stefan Roese + +commit 497d012e5be0194e1084073d0081eb1a844796b2 +Author: Gary Jennejohn +Date: Mon Feb 12 13:11:50 2007 +0100 + + LPC2292: patch from Siemens. + +commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 +Author: Stefan Roese +Date: Sat Feb 10 08:49:31 2007 +0100 + + [PATCH] Add missing p3mx.h file to repository (ups) + + Signed-off-by: Stefan Roese + +commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a +Author: Bartlomiej Sieka +Date: Fri Feb 9 10:45:42 2007 +0100 + + [Motion-PRO] Preliminary support for the Motion-PRO board. + +commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 +Author: Stefan Roese +Date: Wed Feb 7 16:51:08 2007 +0100 + + [PATCH] Update some AMCC 4xx board config files (set initrd_high) + + Some boards that can have more than 768MBytes of SDRAM need to + set "initrd_high", so that the initrd can be accessed by the + Linux kernel. + + Signed-off-by: Stefan Roese + +commit 7372ca68227930d03cffa548310524cad5b96733 +Author: Stefan Roese +Date: Fri Feb 2 12:44:22 2007 +0100 + + [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards + + Previously the strapping DCR/SDR was read to determine if the internal PCI + arbiter is enabled or not. This strapping bit can be overridden, so now + the current status is read from the correct DCR/SDR register. + + Signed-off-by: Stefan Roese + +commit 2aa54f651a42d198673318f07a20c89a43e4d197 +Author: Stefan Roese +Date: Fri Feb 2 12:42:08 2007 +0100 + + [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier + + Signed-off-by: Stefan Roese + +commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b +Author: Stefan Roese +Date: Thu Feb 1 13:22:41 2007 +0100 + + [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file + + When PCI PNP is enabled the pci pnp configuration routine is called + which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some + problems with some PCI cards. For now disable the PCI PNP configuration. + + Signed-off-by: Stefan Roese + +commit 2902fadade3be7659467e8d074048c6b7068f5c0 +Author: Stefan Roese +Date: Wed Jan 31 16:56:10 2007 +0100 + + [PATCH] Update 440EPx/440GRx cpu detection + + Signed-off-by: Stefan Roese + +commit d5ea287b02a6945c3977410e364a879dd1a555c8 +Author: Stefan Roese +Date: Wed Jan 31 16:38:04 2007 +0100 + + [PATCH] Update esd cpci5200 files + + Signed-off-by: Reinhard Arlt + +commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab +Author: Stefan Roese +Date: Wed Jan 31 16:37:34 2007 +0100 + + [PATCH] Add support for esd mecp5200 board + + Signed-off-by: Reinhard Arlt + +commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff +Author: Stefan Roese +Date: Wed Jan 31 12:38:50 2007 +0100 + + [PATCH] Remove unneccessary yellowstone board config file + + Signed-off-by: Stefan Roese + +commit e802594b6fa1b166308820c276b96dc0d7cc731c +Author: Stefan Roese +Date: Tue Jan 30 17:06:10 2007 +0100 + + [PATCH] Update Sequoia (440EPx) config file + + The config file now handles the 2nd target, the Rainier (440GRx) + evaluation board better. Additionally the PPC input clock was + adjusted to match the correct value of 33.0 MHz. + + Signed-off-by: Stefan Roese + +commit 700200c67e73b83751418abe7815840dca8fd6cb +Author: Stefan Roese +Date: Tue Jan 30 17:04:19 2007 +0100 + + [PATCH] Merge Yosemite & Yellowstone board ports + + Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) + share one config file and all board specific files. This way we + don't have to maintain two different sets of files for nearly + identical boards. + + Signed-off-by: Stefan Roese + +commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 +Author: Stefan Roese +Date: Tue Jan 30 15:01:49 2007 +0100 + + [PATCH] Update Prodrive SCPU (PDNB3 variant) board + + SCPU doesn't use redundant environment in flash. + + Signed-off-by: Stefan Roese + +commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 +Author: Stefan Roese +Date: Tue Jan 30 12:51:07 2007 +0100 + + [PATCH] alpr: Update alpr board config file + + Signed-off-by: Stefan Roese + +commit f8db84f132b1e335f20f96138a1f09ed97b08664 +Author: Wolfgang Denk +Date: Tue Jan 30 00:50:40 2007 +0100 + + LPC2292 SODIMM port coding style cleanup. + commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 Author: Gary Jennejohn Date: Wed Jan 24 12:16:56 2007 +0100 diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 36bb7ce2c7..17e3568941 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -366,12 +366,12 @@ int misc_init_r () dcache_lock (); #endif if (flash_info[3].size < CFG_FLASH_INCREMENT) { - unsigned int flash_offset; + unsigned int flash_offset; unsigned int l; flash_offset = CFG_FLASH_INCREMENT - flash_info[3].size; for (l = 0; l < CFG_MAX_FLASH_SECT; l++) { - if (flash_info[3].start[l] != 0) { + if (flash_info[3].start[l] != 0) { flash_info[3].start[l] += flash_offset; } } @@ -503,7 +503,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest) { asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ "stfd 0, 0(4)" /* *dest = fpr0 */ - : : : "fr0"); /* Clobbers fr0 */ + : : : "fr0"); /* Clobbers fr0 */ return; } @@ -581,9 +581,9 @@ int mem_test_data (void) move64 (&(pattern[i]), pmem); move64 (pmem, &temp64); - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ + /* hi = (temp64>>32) & 0xffffffff; */ + /* lo = temp64 & 0xffffffff; */ + /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ hi = (pattern[i] >> 32) & 0xffffffff; lo = pattern[i] & 0xffffffff; @@ -856,11 +856,11 @@ int testdram (void) } #endif /* CFG_DRAM_TEST */ -/* ronen - the below functions are used by the bootm function */ +/* ronen - the below functions are used by the bootm function */ /* - we map the base register to fbe00000 (same mapping as in the LSP) */ /* - we turn off the RX gig dmas - to prevent the dma from overunning */ -/* the kernel data areas. */ -/* - we diable and invalidate the icache and dcache. */ +/* the kernel data areas. */ +/* - we diable and invalidate the icache and dcache. */ void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc) { u32 temp; @@ -911,13 +911,11 @@ int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) GT_REG_READ(0x3d4, &reset_sample_high); printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); - return(0); + return(0); } - U_BOOT_CMD( show_cfg, 1, 1, do_show_cfg, "show_cfg- Show Marvell strapping register\n", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); - diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index cd6b391b10..faa01bd308 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -430,7 +430,7 @@ int do_auto_update(void) bitmap_first = 0; - /* validate the images first */ + /* validate the images first */ for (i = 0; i < AU_MAXFILES; i++) { ulong imsize; /* just read the header */ @@ -448,7 +448,7 @@ int do_auto_update(void) continue; } /* totsize accounts for image size and flash erase size */ - totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); + totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); } #ifdef CONFIG_PROGRESSBAR @@ -470,8 +470,8 @@ int do_auto_update(void) if (sz != ausize[i]) { printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz); - continue; - } + continue; + } if (sz <= 0 || sz <= sizeof(image_header_t)) { debug ("%s not found\n", aufile[i]); diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index 95576ed56b..d60d23332b 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -141,11 +141,12 @@ long int initdram (int board_type) dramsize = 0; /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) + if (dramsize > 0) { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - else + } else { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } /* let SDRAM CS1 start right after CS0 and disable it */ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; diff --git a/board/prodrive/p3mx/p3mx.h b/board/prodrive/p3mx/p3mx.h index 91071e9209..1caae6b9c1 100644 --- a/board/prodrive/p3mx/p3mx.h +++ b/board/prodrive/p3mx/p3mx.h @@ -31,4 +31,3 @@ #define LED_ORANGE 4 #endif /* __P3MX_H__ */ - diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 6cff3a2e1a..ab421196b9 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -44,10 +44,10 @@ (defined(CONFIG_440SP) || defined(CONFIG_440SPE)) #ifndef TRUE -#define TRUE 1 +#define TRUE 1 #endif #ifndef FALSE -#define FALSE 0 +#define FALSE 0 #endif #define SDRAM_DDR1 1 @@ -114,7 +114,7 @@ static void program_codt(unsigned long *dimm_populated, static void program_mode(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t *selected_cas); + ddr_cas_id_t *selected_cas); static void program_tr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -130,7 +130,7 @@ static void program_copt1(unsigned long *dimm_populated, static void program_initplr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas); + ddr_cas_id_t selected_cas); static unsigned long is_ecc_enabled(void); static void program_ecc(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, @@ -139,9 +139,9 @@ static void program_ecc_addr(unsigned long start_address, unsigned long num_bytes); #ifdef HARD_CODED_DQS /* calibration test with hardvalues */ -static void test(void); +static void test(void); #else -static void DQS_calibration_process(void); +static void DQS_calibration_process(void); #endif static void program_DQS_calibration(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, @@ -291,12 +291,12 @@ static unsigned long sdram_memsize(void) * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: initdram * Description: Configures SDRAM memory banks for DDR operation. - * Auto Memory Configuration option reads the DDR SDRAM EEPROMs - * via the IIC bus and then configures the DDR SDRAM memory - * banks appropriately. If Auto Memory Configuration is - * not used, it is assumed that no DIMM is plugged + * Auto Memory Configuration option reads the DDR SDRAM EEPROMs + * via the IIC bus and then configures the DDR SDRAM memory + * banks appropriately. If Auto Memory Configuration is + * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ long int initdram(int board_type) { @@ -532,10 +532,10 @@ static void get_spd_info(unsigned long *dimm_populated, #ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { - if (is_ecc_enabled()) - puts(" (ECC enabled)"); - else - puts(" (ECC not enabled)"); + if (is_ecc_enabled()) + puts(" (ECC enabled)"); + else + puts(" (ECC not enabled)"); } #endif @@ -1092,13 +1092,13 @@ static void program_codt(unsigned long *dimm_populated, static void program_initplr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas) + ddr_cas_id_t selected_cas) { unsigned long MR_CAS_value = 0; /****************************************************** ** Assumption: if more than one DIMM, all DIMMs are the same - ** as already checked in check_memory_type + ** as already checked in check_memory_type ******************************************************/ if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) { diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index a3db93ffbb..200f7b31ad 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1859,11 +1859,11 @@ pll_wait: #if defined(CONFIG_440) #define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: + .align 2; \ + .globl func_name; \ + func_name: #define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name + .size func_name,.-func_name /*----------------------------------------------------------------------------+ | mttlb3. @@ -1877,7 +1877,7 @@ pll_wait: | mftlb3. +----------------------------------------------------------------------------*/ function_prolog(mftlb3) - TLBRE(3,3,2) + TLBRE(3,3,2) blr function_epilog(mftlb3) @@ -1893,7 +1893,7 @@ pll_wait: | mftlb2. +----------------------------------------------------------------------------*/ function_prolog(mftlb2) - TLBRE(3,3,1) + TLBRE(3,3,1) blr function_epilog(mftlb2) @@ -1909,7 +1909,7 @@ pll_wait: | mftlb1. +----------------------------------------------------------------------------*/ function_prolog(mftlb1) - TLBRE(3,3,0) + TLBRE(3,3,0) blr function_epilog(mftlb1) #endif /* CONFIG_440 */ diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index 8c605591b8..e26e6d4020 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -37,8 +37,8 @@ typedef struct region { } region_t; static int add_tlb_entry(unsigned long base_addr, - unsigned long tlb_word0_size_value, - unsigned long tlb_word2_i_value) + unsigned long tlb_word0_size_value, + unsigned long tlb_word2_i_value) { int i; unsigned long tlb_word0_value; @@ -82,7 +82,7 @@ static int add_tlb_entry(unsigned long base_addr, } static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, - unsigned long tlb_word2_i_value) + unsigned long tlb_word2_i_value) { int rc; int tlb_i; diff --git a/drivers/systemace.c b/drivers/systemace.c index 634aa9ba7d..3848d9c59c 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -56,12 +56,12 @@ #if (CFG_SYSTEMACE_WIDTH == 8) #if !defined(__BIG_ENDIAN) #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \ - (readb(CFG_SYSTEMACE_BASE+off+1))) + (readb(CFG_SYSTEMACE_BASE+off+1))) #define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \ writeb(val, CFG_SYSTEMACE_BASE+off+1);} #else #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \ - (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) + (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) #define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \ writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} #endif @@ -73,7 +73,7 @@ /* */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, void *buffer); + unsigned long blkcnt, void *buffer); static block_dev_desc_t systemace_dev = { 0 }; @@ -137,7 +137,7 @@ block_dev_desc_t *systemace_get_dev(int dev) * number of blocks read. A zero return indicates an error. */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, void *buffer) + unsigned long blkcnt, void *buffer) { int retry; unsigned blk_countdown; diff --git a/include/common.h b/include/common.h index 5b2e71c985..b162dbd7cf 100644 --- a/include/common.h +++ b/include/common.h @@ -187,8 +187,7 @@ void hang (void) __attribute__ ((noreturn)); long int initdram (int); int display_options (void); void print_size (ulong, const char *); -int print_buffer (ulong addr, void* data, uint width, uint count, - uint linelen); +int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen); /* common/main.c */ void main_loop (void); diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index ccb0293329..0c1029426c 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -88,10 +88,10 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #else -#define ADD_USB_CMD 0 +#define ADD_USB_CMD 0 #endif /* @@ -100,7 +100,7 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_EEPROM | \ CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ + CFG_CMD_EXT2 | \ CFG_CMD_I2C | \ CFG_CMD_IDE | \ CFG_CMD_BSP | \ @@ -110,11 +110,11 @@ #include #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT16 1 #endif #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT08 1 #endif @@ -131,20 +131,20 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=mecp5200.esd\0" \ - "script=mecp5200.bat\0" \ - "image=/tftpboot/vxWorks_mecp5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ + "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ + "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ + "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ + "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ + "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ + "loadaddr=01000000\0" \ + "serverip=192.168.2.99\0" \ + "gatewayip=10.0.0.79\0" \ + "user=mu\0" \ + "target=mecp5200.esd\0" \ + "script=mecp5200.bat\0" \ + "image=/tftpboot/vxWorks_mecp5200\0" \ + "ipaddr=10.0.13.196\0" \ + "netmask=255.255.0.0\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_vxworks0" @@ -171,12 +171,12 @@ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 +#define CFG_I2C_MULTI_EEPROMS 1 /* * Flash configuration */ #define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000) #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 512 @@ -200,15 +200,15 @@ #define CONFIG_ENV_OVERWRITE 1 #endif -#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #if 0 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #endif -#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ +#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* @@ -272,7 +272,7 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ @@ -339,7 +339,7 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 #endif /* __CONFIG_H */