From: Yanhong Wang Date: Thu, 15 Jun 2023 09:36:43 +0000 (+0800) Subject: net: dwc_eth_qos: Add StarFive ethernet driver glue layer X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=736733b43a2b1d1d37a0fad340cc2fed13fc0447;p=u-boot.git net: dwc_eth_qos: Add StarFive ethernet driver glue layer The StarFive ETHQOS hardware has its own clock and reset,so add a corresponding glue driver to configure them. Signed-off-by: Yanhong Wang Reviewed-by: Ramon Fried --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d662dd3498..0ed39a61e4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -249,6 +249,13 @@ config DWC_ETH_QOS_QCOM The Synopsys Designware Ethernet QOS IP block with specific configuration used in Qcom QCS404 SoC. +config DWC_ETH_QOS_STARFIVE + bool "Synopsys DWC Ethernet QOS device support for STARFIVE" + depends on DWC_ETH_QOS + help + The Synopsys Designware Ethernet QOS IP block with specific + configuration used in STARFIVE JH7110 soc. + config E1000 bool "Intel PRO/1000 Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 46a40e2ed9..d4af253b6f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o obj-$(CONFIG_DWC_ETH_QOS_IMX) += dwc_eth_qos_imx.o obj-$(CONFIG_DWC_ETH_QOS_QCOM) += dwc_eth_qos_qcom.o +obj-$(CONFIG_DWC_ETH_QOS_STARFIVE) += dwc_eth_qos_starfive.o obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index 9bbba6eed0..1e92bd9ca9 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -1725,6 +1725,12 @@ static const struct udevice_id eqos_ids[] = { .data = (ulong)&eqos_qcom_config }, #endif +#if IS_ENABLED(CONFIG_DWC_ETH_QOS_STARFIVE) + { + .compatible = "starfive,jh7110-dwmac", + .data = (ulong)&eqos_jh7110_config + }, +#endif { } }; diff --git a/drivers/net/dwc_eth_qos.h b/drivers/net/dwc_eth_qos.h index fddbe9336c..a6b719af80 100644 --- a/drivers/net/dwc_eth_qos.h +++ b/drivers/net/dwc_eth_qos.h @@ -289,3 +289,4 @@ int eqos_null_ops(struct udevice *dev); extern struct eqos_config eqos_imx_config; extern struct eqos_config eqos_qcom_config; +extern struct eqos_config eqos_jh7110_config; diff --git a/drivers/net/dwc_eth_qos_starfive.c b/drivers/net/dwc_eth_qos_starfive.c new file mode 100644 index 0000000000..5be8ac0f1a --- /dev/null +++ b/drivers/net/dwc_eth_qos_starfive.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Yanhong Wang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dwc_eth_qos.h" + +#define STARFIVE_DWMAC_PHY_INFT_RGMII 0x1 +#define STARFIVE_DWMAC_PHY_INFT_RMII 0x4 +#define STARFIVE_DWMAC_PHY_INFT_FIELD 0x7U + +struct starfive_platform_data { + struct regmap *regmap; + struct reset_ctl_bulk resets; + struct clk_bulk clks; + phy_interface_t interface; + u32 offset; + u32 shift; + bool tx_use_rgmii_clk; +}; + +static int eqos_interface_init_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + struct ofnode_phandle_args args; + unsigned int mode; + int ret; + + switch (data->interface) { + case PHY_INTERFACE_MODE_RMII: + mode = STARFIVE_DWMAC_PHY_INFT_RMII; + break; + + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + mode = STARFIVE_DWMAC_PHY_INFT_RGMII; + break; + + default: + return -EINVAL; + } + + ret = dev_read_phandle_with_args(dev, "starfive,syscon", NULL, + 2, 0, &args); + if (ret) + return ret; + + if (args.args_count != 2) + return -EINVAL; + + data->offset = args.args[0]; + data->shift = args.args[1]; + data->regmap = syscon_regmap_lookup_by_phandle(dev, "starfive,syscon"); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + pr_err("Failed to get regmap: %d\n", ret); + return ret; + } + + return regmap_update_bits(data->regmap, data->offset, + STARFIVE_DWMAC_PHY_INFT_FIELD << data->shift, + mode << data->shift); +} + +static int eqos_set_tx_clk_speed_jh7110(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + struct clk *pclk, *c; + ulong rate; + int ret; + + /* Generally, the rgmii_tx clock is provided by the internal clock, + * which needs to match the corresponding clock frequency according + * to different speeds. If the rgmii_tx clock is provided by the + * external rgmii_rxin, there is no need to configure the clock + * internally, because rgmii_rxin will be adaptively adjusted. + */ + if (data->tx_use_rgmii_clk) + return 0; + + switch (eqos->phy->speed) { + case SPEED_1000: + rate = 125 * 1000 * 1000; + break; + case SPEED_100: + rate = 25 * 1000 * 1000; + break; + case SPEED_10: + rate = 2.5 * 1000 * 1000; + break; + default: + pr_err("invalid speed %d", eqos->phy->speed); + return -EINVAL; + } + + /* eqos->clk_tx clock has no set rate operation, so just set the parent + * clock rate directly + */ + ret = clk_get_by_id(eqos->clk_tx.id, &c); + if (ret) + return ret; + + pclk = clk_get_parent(c); + if (pclk) { + ret = clk_set_rate(pclk, rate); + if (ret < 0) { + pr_err("jh7110 (clk_tx, %lu) failed: %d", rate, ret); + return ret; + } + } + + return 0; +} + +static ulong eqos_get_tick_clk_rate_jh7110(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + + return clk_get_rate(&eqos->clk_tx); +} + +static int eqos_start_clks_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + + return clk_enable_bulk(&data->clks); +} + +static int eqos_stop_clks_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + + return clk_disable_bulk(&data->clks); +} + +static int eqos_start_resets_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + + return reset_deassert_bulk(&data->resets); +} + +static int eqos_stop_resets_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + + return reset_assert_bulk(&data->resets); +} + +static int eqos_remove_resources_jh7110(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data = pdata->priv_pdata; + + reset_assert_bulk(&data->resets); + clk_disable_bulk(&data->clks); + + return 0; +} + +static int eqos_probe_resources_jh7110(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_plat(dev); + struct starfive_platform_data *data; + int ret; + + data = calloc(1, sizeof(struct starfive_platform_data)); + if (!data) + return -ENOMEM; + + pdata->priv_pdata = data; + data->interface = eqos->config->interface(dev); + if (data->interface == PHY_INTERFACE_MODE_NA) { + pr_err("Invalid PHY interface\n"); + return -EINVAL; + } + + ret = reset_get_bulk(dev, &data->resets); + if (ret < 0) + return ret; + + ret = clk_get_bulk(dev, &data->clks); + if (ret < 0) + return ret; + + ret = clk_get_by_name(dev, "gtx", &eqos->clk_tx); + if (ret) + return ret; + + data->tx_use_rgmii_clk = dev_read_bool(dev, "starfive,tx-use-rgmii-clk"); + + return eqos_interface_init_jh7110(dev); +} + +static struct eqos_ops eqos_jh7110_ops = { + .eqos_inval_desc = eqos_inval_desc_generic, + .eqos_flush_desc = eqos_flush_desc_generic, + .eqos_inval_buffer = eqos_inval_buffer_generic, + .eqos_flush_buffer = eqos_flush_buffer_generic, + .eqos_probe_resources = eqos_probe_resources_jh7110, + .eqos_remove_resources = eqos_remove_resources_jh7110, + .eqos_stop_resets = eqos_stop_resets_jh7110, + .eqos_start_resets = eqos_start_resets_jh7110, + .eqos_stop_clks = eqos_stop_clks_jh7110, + .eqos_start_clks = eqos_start_clks_jh7110, + .eqos_calibrate_pads = eqos_null_ops, + .eqos_disable_calibration = eqos_null_ops, + .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_jh7110, + .eqos_get_enetaddr = eqos_null_ops, + .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_jh7110 +}; + +/* mdio_wait: There is no need to wait after setting the MAC_MDIO_Address register + * swr_wait: Software reset bit must be read at least 4 CSR clock cycles + * after it is written to 1. + * config_mac: Enable rx queue to DCB mode. + * config_mac_mdio: CSR clock range is 250-300 Mhz. + * axi_bus_width: The width of the data bus is 64 bit. + */ +struct eqos_config __maybe_unused eqos_jh7110_config = { + .reg_access_always_ok = false, + .mdio_wait = 0, + .swr_wait = 4, + .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB, + .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_250_300, + .axi_bus_width = EQOS_AXI_WIDTH_64, + .interface = dev_read_phy_mode, + .ops = &eqos_jh7110_ops +};