From: Ajay Bhargav Date: Mon, 13 Feb 2012 03:27:42 +0000 (+0000) Subject: USB: Armada100: Add UTMI PHY interface driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=732c7c2446fb98fb2c3b7879f33080286a2d620d;p=u-boot.git USB: Armada100: Add UTMI PHY interface driver This patch adds USB host controller's UTMI PHY interface driver for Armada100 SOCs. Signed-off-by: Ajay Bhargav --- diff --git a/arch/arm/include/asm/arch-armada100/armada100.h b/arch/arm/include/asm/arch-armada100/armada100.h index 0ed3a8ea52..70fba27707 100644 --- a/arch/arm/include/asm/arch-armada100/armada100.h +++ b/arch/arm/include/asm/arch-armada100/armada100.h @@ -43,6 +43,14 @@ #define SSP2_APBCLK 0x01 #define SSP2_FNCLK 0x02 +/* USB Clock/reset control bits */ +#define USB_SPH_AXICLK_EN 0x10 +#define USB_SPH_AXI_RST 0x02 + +/* MPMU Clocks */ +#define APB2_26M_EN (1 << 20) +#define AP_26M (1 << 4) + /* Register Base Addresses */ #define ARMD1_DRAM_BASE 0xB0000000 #define ARMD1_FEC_BASE 0xC0800000 diff --git a/arch/arm/include/asm/arch-armada100/utmi-armada100.h b/arch/arm/include/asm/arch-armada100/utmi-armada100.h new file mode 100644 index 0000000000..097561f1eb --- /dev/null +++ b/arch/arm/include/asm/arch-armada100/utmi-armada100.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2012 + * eInfochips Ltd. + * Written-by: Ajay Bhargav + * + * (C) Copyright 2009 + * Marvell Semiconductor + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __UTMI_ARMADA100__ +#define __UTMI_ARMADA100__ + +#define UTMI_PHY_BASE 0xD4206000 + +/* utmi_ctrl - bits */ +#define INPKT_DELAY_SOF (1 << 28) +#define PLL_PWR_UP 2 +#define PHY_PWR_UP 1 + +/* utmi_pll - bits */ +#define PLL_FBDIV_MASK 0x00000FF0 +#define PLL_FBDIV 4 +#define PLL_REFDIV_MASK 0x0000000F +#define PLL_REFDIV 0 +#define PLL_READY 0x800000 +#define VCOCAL_START (1 << 21) + +#define N_DIVIDER 0xEE +#define M_DIVIDER 0x0B + +/* utmi_tx - bits */ +#define CK60_PHSEL 17 +#define PHSEL_VAL 0x4 +#define RCAL_START (1 << 12) + +/* + * USB PHY registers + * Refer Datasheet Appendix A.21 + */ +struct armd1usb_phy_reg { + u32 utmi_rev; /* USB PHY Revision */ + u32 utmi_ctrl; /* USB PHY Control register */ + u32 utmi_pll; /* PLL register */ + u32 utmi_tx; /* Tx register */ + u32 utmi_rx; /* Rx register */ + u32 utmi_ivref; /* IVREF register */ + u32 utmi_tst_g0; /* Test group 0 register */ + u32 utmi_tst_g1; /* Test group 1 register */ + u32 utmi_tst_g2; /* Test group 2 register */ + u32 utmi_tst_g3; /* Test group 3 register */ + u32 utmi_tst_g4; /* Test group 4 register */ + u32 utmi_tst_g5; /* Test group 5 register */ + u32 utmi_reserve; /* Reserve Register */ + u32 utmi_usb_int; /* USB interuppt register */ + u32 utmi_dbg_ctl; /* Debug control register */ + u32 utmi_otg_addon; /* OTG addon register */ +}; + +int utmi_init(void); + +#endif /* __UTMI_ARMADA100__ */ diff --git a/drivers/usb/host/utmi-armada100.c b/drivers/usb/host/utmi-armada100.c new file mode 100644 index 0000000000..6f1bd2052d --- /dev/null +++ b/drivers/usb/host/utmi-armada100.c @@ -0,0 +1,96 @@ +/* + * (C) Copyright 2012 + * eInfochips Ltd. + * Written-by: Ajay Bhargav + * + * (C) Copyright 2009 + * Marvell Semiconductor + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +static int utmi_phy_init(void) +{ + struct armd1usb_phy_reg *phy_regs = + (struct armd1usb_phy_reg *)UTMI_PHY_BASE; + int timeout; + + setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP); + udelay(1000); + setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP); + + clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK); + setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER); + + setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL); + + /* Calibrate pll */ + timeout = 10000; + while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) + ; + if (!timeout) + return -1; + + udelay(200); + setbits_le32(&phy_regs->utmi_pll, VCOCAL_START); + udelay(400); + clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START); + + udelay(200); + setbits_le32(&phy_regs->utmi_tx, RCAL_START); + udelay(400); + clrbits_le32(&phy_regs->utmi_tx, RCAL_START); + + timeout = 10000; + while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) + ; + if (!timeout) + return -1; + + return 0; +} + +/* + * Initialize USB host controller's UTMI Physical interface + */ +int utmi_init(void) +{ + struct armd1mpmu_registers *mpmu_regs = + (struct armd1mpmu_registers *)ARMD1_MPMU_BASE; + + struct armd1apmu_registers *apmu_regs = + (struct armd1apmu_registers *)ARMD1_APMU_BASE; + + /* Turn on 26Mhz ref clock for UTMI PLL */ + setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M); + + /* USB Clock reset */ + writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc); + writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc); + + /* Initialize UTMI transceiver */ + return utmi_phy_init(); +}