From: Vladimir Oltean Date: Tue, 29 Jun 2021 17:53:16 +0000 (+0300) Subject: net: enetc: force the RGMII MAC speed/duplex instead of using in-band signaling X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=71346a84860c67827ef4852bc1c0ad31ac3f46ed;p=u-boot.git net: enetc: force the RGMII MAC speed/duplex instead of using in-band signaling The RGMII spec supports optional in-band status reporting for the speed and duplex negotiated on the copper side, and the ENETC driver enables this feature by default. However, this does not work when the PHY does not implement the in-band reporting, or when there is a MAC-to-MAC connection described using a fixed-link. In that case, it would be better to disable the feature in the ENETC MAC and always force the speed and duplex to the values that were negotiated and retrieved over MDIO once the autoneg is finished. Since this works always, we just do it unconditionally and drop the in-band code. Note that because we need to wait for the autoneg to complete, we need to move enetc_setup_mac_iface() after phy_startup() returns, and then pass the phydev pointer all the way to enetc_init_rgmii(). The same considerations have led to a similar Linux driver patch as well: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c76a97218dcbb2cb7cec1404ace43ef96c87d874 Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried --- diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c index 9c198a1039..6a5a38c1ff 100644 --- a/drivers/net/fsl_enetc.c +++ b/drivers/net/fsl_enetc.c @@ -178,21 +178,43 @@ static int enetc_init_sgmii(struct udevice *dev) } /* set up MAC for RGMII */ -static int enetc_init_rgmii(struct udevice *dev) +static void enetc_init_rgmii(struct udevice *dev, struct phy_device *phydev) { struct enetc_priv *priv = dev_get_priv(dev); - u32 if_mode; + u32 old_val, val; - /* enable RGMII AN */ - if_mode = enetc_read_port(priv, ENETC_PM_IF_MODE); - if_mode |= ENETC_PM_IF_MODE_AN_ENA; - enetc_write_port(priv, ENETC_PM_IF_MODE, if_mode); + old_val = val = enetc_read_port(priv, ENETC_PM_IF_MODE); - return 0; + /* disable unreliable RGMII in-band signaling and force the MAC into + * the speed negotiated by the PHY. + */ + val &= ~ENETC_PM_IF_MODE_AN_ENA; + + if (phydev->speed == SPEED_1000) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_1000; + } else if (phydev->speed == SPEED_100) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_100; + } else if (phydev->speed == SPEED_10) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_10; + } + + if (phydev->duplex == DUPLEX_FULL) + val |= ENETC_PM_IFM_FULL_DPX; + else + val &= ~ENETC_PM_IFM_FULL_DPX; + + if (val == old_val) + return; + + enetc_write_port(priv, ENETC_PM_IF_MODE, val); } /* set up MAC configuration for the given interface type */ -static void enetc_setup_mac_iface(struct udevice *dev) +static void enetc_setup_mac_iface(struct udevice *dev, + struct phy_device *phydev) { struct enetc_priv *priv = dev_get_priv(dev); u32 if_mode; @@ -202,7 +224,7 @@ static void enetc_setup_mac_iface(struct udevice *dev) case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: - enetc_init_rgmii(dev); + enetc_init_rgmii(dev, phydev); break; case PHY_INTERFACE_MODE_XGMII: case PHY_INTERFACE_MODE_USXGMII: @@ -546,10 +568,10 @@ static int enetc_start(struct udevice *dev) enetc_setup_tx_bdr(dev); enetc_setup_rx_bdr(dev); - enetc_setup_mac_iface(dev); - phy_startup(priv->phy); + enetc_setup_mac_iface(dev, priv->phy); + return 0; } diff --git a/drivers/net/fsl_enetc.h b/drivers/net/fsl_enetc.h index 110c1d78fb..69f2f4aaff 100644 --- a/drivers/net/fsl_enetc.h +++ b/drivers/net/fsl_enetc.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * ENETC ethernet controller driver - * Copyright 2017-2019 NXP + * Copyright 2017-2021 NXP */ #ifndef _ENETC_H @@ -77,6 +77,11 @@ enum enetc_bdr_type {TX, RX}; #define ENETC_PM_IF_MODE 0x8300 #define ENETC_PM_IF_MODE_RG BIT(2) #define ENETC_PM_IF_MODE_AN_ENA BIT(15) +#define ENETC_PM_IFM_SSP_MASK GENMASK(14, 13) +#define ENETC_PM_IFM_SSP_1000 (2 << 13) +#define ENETC_PM_IFM_SSP_100 (0 << 13) +#define ENETC_PM_IFM_SSP_10 (1 << 13) +#define ENETC_PM_IFM_FULL_DPX BIT(12) #define ENETC_PM_IF_IFMODE_MASK GENMASK(1, 0) /* buffer descriptors count must be multiple of 8 and aligned to 128 bytes */