From: Lukasz Tekieli Date: Sun, 28 Jan 2024 19:22:48 +0000 (+0100) Subject: board: visionfive2: configure PHY pad drive strength X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=70f150759b4dd7481664ebdcd99cfe8e5e2c2e4e;p=u-boot.git board: visionfive2: configure PHY pad drive strength Configure the pad drive strength register for both PHYs. The values correspond to what can be found in the Linux DTS for VisionFive2 v1.3b. Pad drive strength configuration is required for the phy0 to work correctly with 100Mbit links. Signed-off-by: Lukasz Tekieli Reviewed-by: Leo Yu-Chi Liang --- diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c index 911add429d..1b49945d11 100644 --- a/board/starfive/visionfive2/spl.c +++ b/board/starfive/visionfive2/spl.c @@ -44,6 +44,10 @@ static const struct starfive_vf2_pro starfive_verb[] = { "motorcomm,tx-clk-100-inverted", NULL}, {"/soc/ethernet@16030000/mdio/ethernet-phy@0", "motorcomm,tx-clk-1000-inverted", NULL}, + {"/soc/ethernet@16030000/mdio/ethernet-phy@0", + "motorcomm,rx-clk-drv-microamp", "3970"}, + {"/soc/ethernet@16030000/mdio/ethernet-phy@0", + "motorcomm,rx-data-drv-microamp", "2910"}, {"/soc/ethernet@16030000/mdio/ethernet-phy@0", "rx-internal-delay-ps", "1900"}, {"/soc/ethernet@16030000/mdio/ethernet-phy@0", @@ -53,6 +57,10 @@ static const struct starfive_vf2_pro starfive_verb[] = { "motorcomm,tx-clk-adj-enabled", NULL}, { "/soc/ethernet@16040000/mdio/ethernet-phy@1", "motorcomm,tx-clk-100-inverted", NULL}, + {"/soc/ethernet@16040000/mdio/ethernet-phy@1", + "motorcomm,rx-clk-drv-microamp", "3970"}, + {"/soc/ethernet@16040000/mdio/ethernet-phy@1", + "motorcomm,rx-data-drv-microamp", "2910"}, {"/soc/ethernet@16040000/mdio/ethernet-phy@1", "rx-internal-delay-ps", "0"}, {"/soc/ethernet@16040000/mdio/ethernet-phy@1",