From: Vivek Mahajan Date: Tue, 27 Oct 2009 06:48:55 +0000 (+0530) Subject: ppc/85xx/pci: fsl_pci_init: pcie agent mode support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc;p=u-boot.git ppc/85xx/pci: fsl_pci_init: pcie agent mode support Originally written by Jason Jin and Mingkai Hu for mpc8536. When QorIQ based board is configured as a PCIe agent, then unlock/enable inbound PCI configuration cycles and init a 4K inbound memory window; so that a PCIe host can access the PCIe agents SDRAM at address 0x0 * Supported in fsl_pci_init_port() after adding pcie_ep as a param * Revamped copyright in drivers/pci/fsl_pci_init.c * Mods in 85xx based board specific pci init after this change Signed-off-by: Vivek Mahajan Signed-off-by: Kumar Gala --- diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 933dd127ec..2b3223453f 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -199,7 +199,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); + &pcie3_hose, first_free_busno, pcie_ep); /* * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. @@ -231,7 +231,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); } else { printf (" PCIE2: disabled\n"); } @@ -251,7 +251,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf (" PCIE1: disabled\n"); } diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index 4c08f9efa0..7736596738 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -71,7 +71,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); } else { printf (" PCIE2: disabled\n"); } @@ -90,7 +90,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf (" PCIE1: disabled\n"); } diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index e38c0145ed..9878fba10f 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -227,7 +227,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); /* * The workaround doesn't work on p2020 because the location @@ -267,7 +267,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); + &pcie3_hose, first_free_busno, pcie_ep); } else { printf(" PCIE3: disabled\n"); } @@ -286,7 +286,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf(" PCIE1: disabled\n"); } diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab961..5e3e17658d 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -359,7 +359,7 @@ pci_init_board(void) SET_STD_PCI_INFO(pci_info[num], 1); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pci1_hose, first_free_busno); + &pci1_hose, first_free_busno, 0); } else { printf (" PCI: disabled\n"); } @@ -378,7 +378,7 @@ pci_init_board(void) SET_STD_PCIE_INFO(pci_info[num], 1); printf (" PCIE at base address %lx\n", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, 0); } else { printf (" PCIE: disabled\n"); } diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 87944bfad5..8fbab68a20 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007-2009 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -413,13 +413,27 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) } int fsl_pci_init_port(struct fsl_pci_info *pci_info, - struct pci_controller *hose, int busno) + struct pci_controller *hose, int busno, int pcie_ep) { volatile ccsr_fsl_pci_t *pci; struct pci_region *r; pci = (ccsr_fsl_pci_t *) pci_info->regs; + if (pcie_ep) { + volatile pit_t *pi = &pci->pit[2]; + + pci_setup_indirect(hose, (u32)&pci->cfg_addr, + (u32)&pci->cfg_data); + out_be32(&pi->pitar, 0); + out_be32(&pi->piwbar, 0); + out_be32(&pi->piwar, PIWAR_EN | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_IWS_4K); + + fsl_pci_config_unlock(hose); + return 0; + } + /* on non-PCIe controllers we don't have pme_msg_det so this code * should do nothing since the read will return 0 */ diff --git a/include/asm-ppc/fsl_pci.h b/include/asm-ppc/fsl_pci.h index 2790da7ed1..6b0c89bd3f 100644 --- a/include/asm-ppc/fsl_pci.h +++ b/include/asm-ppc/fsl_pci.h @@ -62,6 +62,7 @@ typedef struct pci_inbound_window { #define PIWAR_LOCAL 0x00f00000 #define PIWAR_READ_SNOOP 0x00050000 #define PIWAR_WRITE_SNOOP 0x00005000 +#define PIWAR_IWS_4K 0x0000000b u32 res2[3]; } pit_t; @@ -171,7 +172,7 @@ struct fsl_pci_info { }; int fsl_pci_init_port(struct fsl_pci_info *pci_info, - struct pci_controller *hose, int busno); + struct pci_controller *hose, int busno, int pcie_ep); #define SET_STD_PCI_INFO(x, num) \ { \