From: Heiko Schocher Date: Sun, 1 Dec 2019 10:23:28 +0000 (+0100) Subject: imx6: aristainetos: cleanup default Environment X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=70be2fcadc8f62c34c38dae8d42008adc8afd75b;p=u-boot.git imx6: aristainetos: cleanup default Environment sync defaut Envoronment with customer changes. Unfortunately they are not changeable, as already board is in production mode. Get rid of the big bootcommand and set bootcommand through Kconfig option. Signed-off-by: Heiko Schocher --- diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index d7f24373d1..cad9839f70 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -11,6 +11,8 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run ari_boot" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SUPPORT_RAW_INITRD=y diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 1999c5c616..fba26d0151 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -18,19 +18,6 @@ #define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "board_type=aristainetos2_7@1\0" \ - "nor_bootdelay=-2\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \ - "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \ - "-(rescue-system);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \ - "ubiargs=setenv bootargs console=${console},${baudrate} " \ - "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \ - "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \ - "ubifsload ${fit_addr_r} /boot/system.itb; " \ - "imi ${fit_addr_r}\0 " - /* Framebuffer */ #define CONFIG_SYS_LDB_CLOCK 28341000 #define CONFIG_LG4573 @@ -49,49 +36,87 @@ #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN +#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ + "dead=led led_red on\0" \ + "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \ + "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \ + "-(ubi-nor);gpmi-nand:-(ubi)\0" \ + "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ + "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ + "mainboot=echo Booting from SD-card ...; " \ + "run mainargs addmtd addmisc;" \ + "if test -n ${addmiscM}; then run addmiscM;fi;" \ + "if test -n ${addmiscC}; then run addmiscC;fi;" \ + "if test -n ${addmiscD}; then run addmiscD;fi;" \ + "run boot_board_type;" \ + "bootm ${fit_addr_r}\0" \ + "mainargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ + "${fit_file}\0" \ + "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ + "${fit_addr_r} ${rescue_fit_file}\0" + #define CONFIG_EXTRA_ENV_SETTINGS \ "disable_giga=yes\0" \ + "usb_pgood_delay=2000\0" \ + "nor_bootdelay=-2\0" \ "script=u-boot.scr\0" \ "fit_file=/boot/system.itb\0" \ + "rescue_fit_file=/boot/rescue.itb\0" \ "loadaddr=0x12000000\0" \ "fit_addr_r=0x14000000\0" \ "uboot=/boot/u-boot.imx\0" \ "uboot_sz=d0000\0" \ - "rescue_sys_addr=f0000\0" \ - "rescue_sys_length=f10000\0" \ "panel=lb07wv8\0" \ "splashpos=m,m\0" \ "console=" CONSOLE_DEV "\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ - "default ${board_type}\0" \ + "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \ "get_env=mw ${loadaddr} 0 0x20000;" \ "mmc rescan;" \ - "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ "env import -t ${loadaddr}\0" \ - "default_env=mw ${loadaddr} 0 0x20000;" \ - "env export -t ${loadaddr} serial# ethaddr eth1addr " \ - "board_type panel;" \ + "default_env=gpio set wp_spi_nor.gpio-hog;" \ + "sf probe;" \ + "sf protect unlock 0 0x1000000;" \ + "mw ${loadaddr} 0 0x20000;" \ + "env export -t ${loadaddr} serial# ethaddr " \ + "board_type panel addmisc addmiscM addmiscC addmiscD;" \ "env default -a;" \ "env import -t ${loadaddr}\0" \ "loadbootscript=" \ - "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${script};\0" \ + "loadbootscriptUSB=" \ + "ext4load usb 0 ${loadaddr} ${script};\0" \ + "loadbootscriptUSBf=" \ + "fatload usb 0 ${loadaddr} ${script};\0" \ + "bootscriptUSB=echo Running bootscript from usb-stick ...; " \ + "source\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "mmcpart=1\0" \ + "mmcrescuepart=3\0" \ "mmcdev=0\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addmtd addmisc set_fit_default;" \ + "run mmcargs addmtd addmisc;" \ + "if test -n ${addmiscM}; then run addmiscM;fi;" \ + "if test -n ${addmiscC}; then run addmiscC;fi;" \ + "if test -n ${addmiscD}; then run addmiscD;fi;" \ + "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ - "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ + "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ "${fit_file}\0" \ - "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ "${uboot}\0" \ + "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ + "${fit_addr_r} ${rescue_fit_file}\0" \ "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ "setexpr uboot_maxsize ${uboot_sz} - 400;" \ @@ -100,50 +125,163 @@ "sf write ${loadaddr} 400 ${filesize};" \ "sf read ${cmp_buf} 400 ${uboot_sz};" \ "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ - "ubiboot=echo Booting from ubi ...; " \ - "run ubiargs addmtd addmisc set_fit_default;" \ - "bootm ${fit_addr_r}\0" \ "rescueargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/ram rw\0 " \ - "rescueboot=echo Booting rescue system from NOR ...; " \ - "run rescueargs addmtd addmisc set_fit_default;" \ + "rescueboot=echo Booting rescue system ...; " \ + "run rescueargs addmtd addmisc;" \ + "if test -n ${rescue_reason}; then run rescue_reason;fi;" \ + "if test -n ${addmiscM}; then run addmiscM;fi;" \ + "if test -n ${addmiscC}; then run addmiscC;fi;" \ + "if test -n ${addmiscD}; then run addmiscD;fi;" \ + "run boot_board_type;" \ + "if bootm ${fit_addr_r}; then ; " \ + "else " \ + "run dead; " \ + "fi; \0" \ + "r_reason_syserr=setenv rescue_reason setenv bootargs " \ + "\\\\${bootargs} " \ + "rescueReason=18\0 " \ + "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \ + "${rescue_fit_file}\0" \ + "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \ + "${rescue_fit_file}\0" \ + "usbroot=/dev/sda1 rootwait rw\0" \ + "usbboot=echo Booting from usb-stick ...; " \ + "run usbargs addmtd addmisc;" \ + "if test -n ${addmiscM}; then run addmiscM;fi;" \ + "if test -n ${addmiscC}; then run addmiscC;fi;" \ + "if test -n ${addmiscD}; then run addmiscD;fi;" \ + "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ - "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ - "${rescue_sys_length}; imi ${fit_addr_r}\0" \ - CONFIG_EXTRA_ENV_BOARD_SETTINGS - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ + "usbargs=setenv bootargs console=${console},${baudrate} " \ + "root=${usbroot}\0" \ + "mmc_rescue_boot=" \ + "run r_reason_syserr;" \ + "if run mmc_rescue_load_fit hab_check_file_fit; then " \ + "run rescueboot; " \ "else " \ - "if run mmc_load_fit; then " \ - "run mmcboot; " \ + "run dead; " \ + "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \ + "fi;\0" \ + "main_rescue_boot=" \ + "if run main_load_fit hab_check_flash_fit; then " \ + "if run mainboot; then ; " \ "else " \ - "if run ubifs_load_fit; then " \ - "run ubiboot; " \ + "run r_reason_syserr;" \ + "if run rescue_load_fit hab_check_file_fit;" \ + "then run rescueboot; " \ "else " \ - "if run rescue_load_fit; then " \ - "run rescueboot; " \ - "else " \ - "echo RESCUE SYSTEM BOOT " \ - "FAILURE;" \ - "fi; " \ + "run dead; " \ + "echo RESCUE SYSTEM BOOT FAILURE;" \ "fi; " \ "fi; " \ - "fi; " \ - "else " \ - "if run ubifs_load_fit; then " \ - "run ubiboot; " \ "else " \ - "if run rescue_load_fit; then " \ + "run r_reason_syserr;" \ + "if run rescue_load_fit hab_check_file_fit; then " \ "run rescueboot; " \ "else " \ + "run dead; " \ "echo RESCUE SYSTEM BOOT FAILURE;" \ "fi; " \ + "fi;\0" \ + "usb_mmc_rescue_boot=" \ + "usb start;" \ + "if usb storage; then " \ + "if run loadbootscriptUSB " \ + "hab_check_file_bootscript;" \ + "then run bootscriptUSB; " \ + "fi; " \ + "if run loadbootscriptUSBf " \ + "hab_check_file_bootscript;" \ + "then run bootscriptUSB; " \ + "fi; " \ + "if run usb_load_fit hab_check_file_fit; then " \ + "run usbboot; " \ + "fi; " \ + "if run usb_load_fitf hab_check_file_fit; then " \ + "run usbboot; " \ + "fi; "\ + "if run usb_load_rescuefit hab_check_file_fit;" \ + "then run r_reason_syserr rescueboot;" \ + "fi; " \ + "if run usb_load_rescuefitf hab_check_file_fit;" \ + "then run r_reason_syserr rescueboot;" \ + "fi; " \ + "run mmc_rescue_boot;" \ + "fi; "\ + "run mmc_rescue_boot;\0" \ + "rescue_xload_boot=" \ + "run r_reason_syserr;" \ + "if test ${bootmode} -ne 0 ; then " \ + "mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run mmc_rescue_load_fit " \ + "hab_check_file_fit; then " \ + "run rescueboot; " \ + "else " \ + "usb start;" \ + "if usb storage; then " \ + "if run usb_load_rescuefit " \ + "hab_check_file_fit;"\ + "then " \ + "run rescueboot;" \ + "fi; " \ + "if run usb_load_rescuefitf "\ + "hab_check_file_fit;"\ + "then " \ + "run rescueboot;" \ + "fi; " \ + "fi;" \ + "fi;" \ + "run dead; " \ + "echo RESCUE SYSTEM ON SD OR " \ + "USB BOOT FAILURE;" \ + "else " \ + "usb start;" \ + "if usb storage; then " \ + "if run usb_load_rescuefit " \ + "hab_check_file_fit; then " \ + "run rescueboot;" \ + "fi; " \ + "if run usb_load_rescuefitf " \ + "hab_check_file_fit; then " \ + "run rescueboot;" \ + "fi; " \ + "fi;" \ + "run dead; " \ + "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \ + "fi; " \ + "else "\ + "if run rescue_load_fit hab_check_file_fit; then " \ + "run rescueboot; " \ + "else " \ + "run dead; " \ + "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \ + "fi; " \ + "fi;\0" \ + "ari_boot=if test ${bootmode} -ne 0 ; then " \ + "mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run loadbootscript hab_check_file_bootscript;" \ + "then run bootscript; " \ + "fi; " \ + "if run mmc_load_fit hab_check_file_fit; then " \ + "if run mmcboot; then ; " \ + "else " \ + "run mmc_rescue_boot;" \ + "fi; " \ + "else " \ + "run usb_mmc_rescue_boot;" \ + "fi; " \ + "else " \ + "run usb_mmc_rescue_boot;" \ "fi; " \ - "fi" + "else "\ + "run main_rescue_boot;" \ + "fi; \0"\ + CONFIG_EXTRA_ENV_BOARD_SETTINGS #define CONFIG_ARP_TIMEOUT 200UL