From: Tim Harvey Date: Fri, 9 Sep 2022 22:58:42 +0000 (-0700) Subject: arm: dts: imx8mm-venice-gw7903: add dig1_ctl and dig2_ctl gpios X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6fe5df86fb2f87fc5b7876e26e2e3e17b217d8e6;p=u-boot.git arm: dts: imx8mm-venice-gw7903: add dig1_ctl and dig2_ctl gpios The GW7903 revision B adds two additional GPIO's to control the direction of the 2 isolated digital I/O circuits. Define them as: - dig1_ctl - dig2_ctl Signed-off-by: Tim Harvey --- diff --git a/arch/arm/dts/imx8mm-venice-gw7903-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7903-u-boot.dtsi index 896e5d4edd..ff9b12a834 100644 --- a/arch/arm/dts/imx8mm-venice-gw7903-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw7903-u-boot.dtsi @@ -43,6 +43,20 @@ line-name = "dig2_out#"; }; + dig2ctl { + gpio-hog; + output-low; + gpios = <2 GPIO_ACTIVE_HIGH>; + line-name = "dig2_ctl"; + }; + + dig1ctl { + gpio-hog; + output-low; + gpios = <6 GPIO_ACTIVE_HIGH>; + line-name = "dig1_ctl"; + }; + dig1out { gpio-hog; output-high; diff --git a/arch/arm/dts/imx8mm-venice-gw7903.dts b/arch/arm/dts/imx8mm-venice-gw7903.dts index a7dae9bd4c..1b69ac0e12 100644 --- a/arch/arm/dts/imx8mm-venice-gw7903.dts +++ b/arch/arm/dts/imx8mm-venice-gw7903.dts @@ -250,7 +250,7 @@ }; &gpio2 { - gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "", + gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "", "dig1_out#", "dig1_in", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; @@ -630,6 +630,8 @@ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x40000041 /* DIG1_IN */ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40000041 /* DIG1_CTL */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x40000041 /* DIG2_CTL */ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000041 /* DIG2_IN */ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000041 /* DIG2_OUT */ MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x40000041 /* SIM1DET# */