From: Simon Glass Date: Thu, 5 May 2016 13:28:12 +0000 (-0600) Subject: arm: at91: dts: Bring in device tree file for AT91SAM9G45 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6f9678567a57c5c82620c35a05a2f89c32cdd34d;p=u-boot.git arm: at91: dts: Bring in device tree file for AT91SAM9G45 Add this file from Linux v4.5. Signed-off-by: Simon Glass Reviewed-by: Heiko Schocher Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a8276138ab..602fab1a16 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -2,6 +2,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +dtb-$(CONFIG_AT91FAMILY) += at91sam9g45-gurnard.dtb dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ diff --git a/arch/arm/dts/at91sam9g45.dtsi b/arch/arm/dts/at91sam9g45.dtsi new file mode 100644 index 0000000000..af8b708ac3 --- /dev/null +++ b/arch/arm/dts/at91sam9g45.dtsi @@ -0,0 +1,1335 @@ +/* + * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC + * applies to AT91SAM9G45, AT91SAM9M10, + * AT91SAM9G46, AT91SAM9M11 SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre + * + * Licensed under GPLv2 or later. + */ + +#include "skeleton.dtsi" +#include +#include +#include +#include +#include + +/ { + model = "Atmel AT91SAM9G45 family SoC"; + compatible = "atmel,at91sam9g45"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + ssc0 = &ssc0; + ssc1 = &ssc1; + pwm0 = &pwm0; + }; + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x70000000 0x10000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000>; + }; + }; + + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x10000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; + }; + + ramc0: ramc@ffffe400 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe400 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + ramc1: ramc@ffffe600 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe600 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g45-pmc", "syscon"; + reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 2 1 + 400000000 450000000 3 1>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9g45-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioDE_clk: pioDE_clk { + #clock-cells = <0>; + reg = <5>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <9>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <18>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <19>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <23>; + }; + + ac97_clk: ac97_clk { + #clock-cells = <0>; + reg = <24>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <25>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <26>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <27>; + }; + + aestdessha_clk: aestdessha_clk { + #clock-cells = <0>; + reg = <28>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <29>; + }; + + vdec_clk: vdec_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + + shdwc@fffffd10 { + compatible = "atmel,at91sam9rl-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + tcb1: timer@fffd4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffd4000 0x100>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = ; + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = ; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = ; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = ; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = ; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = ; + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = ; + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = ; + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = ; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + ; /* PB13 periph A */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + ; /* PA20 periph A TWD0 */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + ; /* PB10 periph A TWD1 */ + }; + }; + + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + ; /* HSYNC */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + ; /* D9 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + ; /* D11 */ + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + ; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + ; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + ; /* PB15 periph B */ + }; + }; + + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + ; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + ; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + ; /* PD17 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + ; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + ; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + ; /* PC11 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + ; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + ; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + ; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + ; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + ; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + ; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + ; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + ; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + ; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + ; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + ; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + ; /* PA30 periph A with pullup */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + ; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + ; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + ; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + ; /* PD15 periph A */ + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + ; /* PB2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + ; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = ; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = ; + }; + }; + + fb { + pinctrl_fb: fb-0 { + atmel,pins = + ; /* PE30 periph A */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioDE_clk>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioDE_clk>; + }; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@fff90000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff90000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fff94000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff94000 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@fff98000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff98000 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at91sam9260-macb", "cdns,macb"; + reg = <0xfffbc000 0x100>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + trng@fffcc000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfffcc000 0x4000>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@fff88000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff88000 0x100>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + + ssc0: ssc@fff9c000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xfff9c000 0x4000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + ssc1: ssc@fffa0000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xfffa0000 0x4000>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + adc0: adc@fffb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9g45-adc"; + reg = <0xfffb0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0xff>; + atmel,adc-vref = <3300>; + atmel,adc-startup-time = <40>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; + + trigger@0 { + reg = <0>; + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + reg = <1>; + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger@2 { + reg = <2>; + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger@3 { + reg = <3>; + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + isi@fffb4000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xfffb4000 0x4000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pwm0: pwm@fffb8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffb8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; + dma-names = "rxtx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; + dma-names = "rxtx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; + status = "disabled"; + }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + usb2: gadget@fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9g45-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + rtc@fffffdb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffdb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + gpbr: syscon@fffffd60 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd60 0x10>; + status = "disabled"; + }; + }; + + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; + status = "disabled"; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe200 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00700000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb1: ehci@00800000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00800000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h new file mode 100644 index 0000000000..ab3ee241d1 --- /dev/null +++ b/include/dt-bindings/clock/at91.h @@ -0,0 +1,23 @@ +/* + * This header provides constants for AT91 pmc status. + * + * The constants defined in this header are being used in dts. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _DT_BINDINGS_CLK_AT91_H +#define _DT_BINDINGS_CLK_AT91_H + +#define AT91_PMC_MOSCS 0 /* MOSCS Flag */ +#define AT91_PMC_LOCKA 1 /* PLLA Lock */ +#define AT91_PMC_LOCKB 2 /* PLLB Lock */ +#define AT91_PMC_MCKRDY 3 /* Master Clock */ +#define AT91_PMC_LOCKU 6 /* UPLL Lock */ +#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */ +#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */ +#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */ +#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */ +#define AT91_PMC_GCKRDY 24 /* Generated Clocks */ + +#endif diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h new file mode 100644 index 0000000000..ab6cbba454 --- /dev/null +++ b/include/dt-bindings/dma/at91.h @@ -0,0 +1,52 @@ +/* + * This header provides macros for at91 dma bindings. + * + * Copyright (C) 2013 Ludovic Desroches + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_DMA_H__ +#define __DT_BINDINGS_AT91_DMA_H__ + +/* ---------- HDMAC ---------- */ + +/* + * Source and/or destination peripheral ID + */ +#define AT91_DMA_CFG_PER_ID_MASK (0xff) +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) + +/* + * FIFO configuration: it defines when a request is serviced. + */ +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ + + +/* ---------- XDMAC ---------- */ +#define AT91_XDMAC_DT_MEM_IF_MASK (0x1) +#define AT91_XDMAC_DT_MEM_IF_OFFSET (13) +#define AT91_XDMAC_DT_MEM_IF(mem_if) (((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \ + << AT91_XDMAC_DT_MEM_IF_OFFSET) +#define AT91_XDMAC_DT_GET_MEM_IF(cfg) (((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \ + & AT91_XDMAC_DT_MEM_IF_MASK) + +#define AT91_XDMAC_DT_PER_IF_MASK (0x1) +#define AT91_XDMAC_DT_PER_IF_OFFSET (14) +#define AT91_XDMAC_DT_PER_IF(per_if) (((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \ + << AT91_XDMAC_DT_PER_IF_OFFSET) +#define AT91_XDMAC_DT_GET_PER_IF(cfg) (((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \ + & AT91_XDMAC_DT_PER_IF_MASK) + +#define AT91_XDMAC_DT_PERID_MASK (0x7f) +#define AT91_XDMAC_DT_PERID_OFFSET (24) +#define AT91_XDMAC_DT_PERID(perid) (((perid) & AT91_XDMAC_DT_PERID_MASK) \ + << AT91_XDMAC_DT_PERID_OFFSET) +#define AT91_XDMAC_DT_GET_PERID(cfg) (((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \ + & AT91_XDMAC_DT_PERID_MASK) + +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h new file mode 100644 index 0000000000..bbca3d0389 --- /dev/null +++ b/include/dt-bindings/pinctrl/at91.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for most at91 pinctrl bindings. + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_PINCTRL_H__ +#define __DT_BINDINGS_AT91_PINCTRL_H__ + +#define AT91_PINCTRL_NONE (0 << 0) +#define AT91_PINCTRL_PULL_UP (1 << 0) +#define AT91_PINCTRL_MULTI_DRIVE (1 << 1) +#define AT91_PINCTRL_DEGLITCH (1 << 2) +#define AT91_PINCTRL_PULL_DOWN (1 << 3) +#define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_DEBOUNCE (1 << 16) +#define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) + +#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) + +#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) + +#define AT91_PIOA 0 +#define AT91_PIOB 1 +#define AT91_PIOC 2 +#define AT91_PIOD 3 +#define AT91_PIOE 4 + +#define AT91_PERIPH_GPIO 0 +#define AT91_PERIPH_A 1 +#define AT91_PERIPH_B 2 +#define AT91_PERIPH_C 3 +#define AT91_PERIPH_D 4 + +#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */