From: Marek Vasut <marek.vasut+renesas@gmail.com>
Date: Wed, 13 Jun 2018 06:02:55 +0000 (+0200)
Subject: mmc: tmio: Do not set divider to 1 in DDR mode
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6f8f20f85deeed9be351f8da36f2b38136207063;p=u-boot.git

mmc: tmio: Do not set divider to 1 in DDR mode

The TMIO core has a quirk where divider == 1 must not be set in DDR modes.
Handle this by setting divider to 2, as suggested in the documentation.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c
index 3ba2f07460..424b60ce52 100644
--- a/drivers/mmc/tmio-common.c
+++ b/drivers/mmc/tmio-common.c
@@ -574,6 +574,10 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv,
 
 	divisor = DIV_ROUND_UP(mclk, mmc->clock);
 
+	/* Do not set divider to 0xff in DDR mode */
+	if (mmc->ddr_mode && (divisor == 1))
+		divisor = 2;
+
 	if (divisor <= 1)
 		val = (priv->caps & TMIO_SD_CAP_RCAR) ?
 		      TMIO_SD_CLKCTL_RCAR_DIV1 : TMIO_SD_CLKCTL_DIV1;