From: Philip Oberfichtner <pro@denx.de>
Date: Fri, 20 May 2022 08:46:22 +0000 (+0200)
Subject: ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6ecd1d66a92d53e624c73f92d092a7220961be4c;p=u-boot.git

ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header

Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from
board header. This is required, because the DH picoITX and DRC02 boards
require different settings than PDK2. The corresponding 'phy-handle'
device tree properties are already there.

I tested this change on picoITX and DRC02, but on PDK2 it is untested.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philip Oberfichtner <pro@denx.de>
---

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 2b14464dff..178f5a6e7d 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -30,9 +30,6 @@
 /* Bootcounter */
 #define CONFIG_SYS_BOOTCOUNT_BE
 
-/* FEC ethernet */
-#define CONFIG_FEC_MXC_PHYADDR		7
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	3