From: Sumit Garg Date: Fri, 12 Apr 2024 09:54:33 +0000 (+0530) Subject: apq8016: Add support for UART1 clocks and pinmux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6e992a6bc85ce40a9b24924db52ce90c9efc3005;p=u-boot.git apq8016: Add support for UART1 clocks and pinmux SE HMIBSC board uses UART1 as the main debug console, so add corresponding clocks and pinmux support. Along with that update instructions to enable clocks for debug UART support. Reviewed-by: Caleb Connolly Signed-off-by: Sumit Garg Signed-off-by: Caleb Connolly --- diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index 6210fba879..d3b63b9c1a 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -31,7 +31,8 @@ #define BLSP1_AHB_CBCR 0x1008 /* Uart clock control registers */ -#define BLSP1_UART2_BCR (0x3028) +#define BLSP1_UART1_APPS_CBCR (0x203C) +#define BLSP1_UART1_APPS_CMD_RCGR (0x2044) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) @@ -52,7 +53,7 @@ static struct vote_clk gcc_blsp1_ahb_clk = { }; /* SDHCI */ -static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) +static int apq8016_clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) { int div = 15; /* 100MHz default */ @@ -70,20 +71,35 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) } /* UART: 115200 */ -int apq8016_clk_init_uart(phys_addr_t base) +int apq8016_clk_init_uart(phys_addr_t base, unsigned long id) { + u32 cmd_rcgr, apps_cbcr; + + switch (id) { + case GCC_BLSP1_UART1_APPS_CLK: + cmd_rcgr = BLSP1_UART1_APPS_CMD_RCGR; + apps_cbcr = BLSP1_UART1_APPS_CBCR; + break; + case GCC_BLSP1_UART2_APPS_CLK: + cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR; + apps_cbcr = BLSP1_UART2_APPS_CBCR; + break; + default: + return 0; + } + /* Enable AHB clock */ clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625, - CFG_CLK_SRC_GPLL0, 16); + clk_rcg_set_rate_mnd(base, cmd_rcgr, 1, 144, 15625, CFG_CLK_SRC_GPLL0, + 16); /* Vote for gpll0 clock */ clk_enable_gpll0(base, &gpll0_vote_clk); /* Enable core clk */ - clk_enable_cbc(base + BLSP1_UART2_APPS_CBCR); + clk_enable_cbc(base + apps_cbcr); return 0; } @@ -94,13 +110,12 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate) switch (clk->id) { case GCC_SDCC1_APPS_CLK: /* SDC1 */ - return clk_init_sdc(priv, 0, rate); - break; + return apq8016_clk_init_sdc(priv, 0, rate); case GCC_SDCC2_APPS_CLK: /* SDC2 */ - return clk_init_sdc(priv, 1, rate); - break; + return apq8016_clk_init_sdc(priv, 1, rate); + case GCC_BLSP1_UART1_APPS_CLK: /* UART1 */ case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */ - apq8016_clk_init_uart(priv->base); + apq8016_clk_init_uart(priv->base, clk->id); return 7372800; default: return 0; diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c index a9a00f4b08..1ee8b7db1a 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c @@ -29,6 +29,7 @@ static const char * const msm_pinctrl_pins[] = { }; static const struct pinctrl_function msm_pinctrl_functions[] = { + {"blsp_uart1", 2}, {"blsp_uart2", 2}, }; diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c index c05dda8bdb..06a948a2f6 100644 --- a/drivers/serial/serial_msm.c +++ b/drivers/serial/serial_msm.c @@ -300,12 +300,17 @@ static struct msm_serial_data init_serial_data = { #include /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */ -//int apq8016_clk_init_uart(phys_addr_t gcc_base); +//int apq8016_clk_init_uart(phys_addr_t gcc_base, unsigned long id); static inline void _debug_uart_init(void) { - /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */ - //apq8016_clk_init_uart(0x1800000); + /* + * Uncomment to turn on UART clocks when debugging U-Boot as aboot + * on MSM8916. Supported debug UART clock IDs: + * - db410c: GCC_BLSP1_UART2_APPS_CLK + * - HMIBSC: GCC_BLSP1_UART1_APPS_CLK + */ + //apq8016_clk_init_uart(0x1800000, ); uart_dm_init(&init_serial_data); }