From: Jonas Karlman Date: Sun, 4 Feb 2024 20:53:06 +0000 (+0000) Subject: rockchip: rk35xx: Enable eMMC HS200 mode by default X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6de9d7b2f13c9648734b8b051831b2b489610834;p=u-boot.git rockchip: rk35xx: Enable eMMC HS200 mode by default Testing has shown that writing to eMMC using a slower mode then HS200 typically generate an ERROR on first attempt on RK3588. # Rescan using MMC legacy mode => mmc rescan 0 # Write a single block to sector 0x4000 fails with ERROR => mmc write 20000000 4000 1 # Write a single block to sector 0x4000 now works => mmc write 20000000 4000 1 With the MMC_SPEED_MODE_SET Kconfig option enabled. Writing to eMMC using HS200 mode work more reliably than slower modes on RK35xx boards. Enable MMC_HS200_SUPPORT Kconfig option by default to prefer use of HS200 mode on RK356x and RK3588. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index fee4a0e9a6..1bc7ee9042 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -293,6 +293,8 @@ config ROCKCHIP_RK3568 imply OF_LIBFDT_OVERLAY imply ROCKCHIP_OTP imply MISC_INIT_R + imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP + imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT help The Rockchip RK3568 is a ARM-based SoC with quad-core Cortex-A55, including NEON and GPU, 512K L3 cache, Mali-G52 based graphics, @@ -318,6 +320,8 @@ config ROCKCHIP_RK3588 imply OF_LIBFDT_OVERLAY imply ROCKCHIP_OTP imply MISC_INIT_R + imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP + imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT imply CLK_SCMI imply SCMI_FIRMWARE imply BOOTSTD_FULL diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig index 833cff0e45..f5a472d03d 100644 --- a/configs/nanopi-r5c-rk3568_defconfig +++ b/configs/nanopi-r5c-rk3568_defconfig @@ -58,8 +58,6 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y -CONFIG_MMC_HS200_SUPPORT=y -CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig index 2736d382a3..99692d341f 100644 --- a/configs/nanopi-r5s-rk3568_defconfig +++ b/configs/nanopi-r5s-rk3568_defconfig @@ -58,8 +58,6 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y -CONFIG_MMC_HS200_SUPPORT=y -CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig index 5a613abe0d..fedb137877 100644 --- a/configs/radxa-e25-rk3568_defconfig +++ b/configs/radxa-e25-rk3568_defconfig @@ -60,8 +60,6 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y -CONFIG_MMC_HS200_SUPPORT=y -CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y