From: Alex Marginean Date: Thu, 14 Nov 2019 16:28:35 +0000 (+0200) Subject: drivers: net: aquantia: check system interface too when checking for link up X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6d9bc2043a5ee95bebbe57dfe6c034d60a607a7b;p=u-boot.git drivers: net: aquantia: check system interface too when checking for link up In some cases the link on the system interface of the aquantia PHY comes up after the link on line interface. The link state loop only checks the line side, which may result in first packet sent being lost. Use aquantia_link_is_up instead, which checks both system and line side on gen 2/3 PHYs to avoid losing the 1st packet. Signed-off-by: Alex Marginean Acked-by: Joe Hershberger --- diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index 3992a97712..c4bd443001 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -555,17 +555,14 @@ int aquantia_startup(struct phy_device *phydev) phydev->duplex = DUPLEX_FULL; /* if the AN is still in progress, wait till timeout. */ - phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); - reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); - if (!(reg & MDIO_AN_STAT1_COMPLETE)) { + if (!aquantia_link_is_up(phydev)) { printf("%s Waiting for PHY auto negotiation to complete", phydev->dev->name); do { udelay(1000); - reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); if ((i++ % 500) == 0) printf("."); - } while (!(reg & MDIO_AN_STAT1_COMPLETE) && + } while (!aquantia_link_is_up(phydev) && i < (4 * PHY_ANEG_TIMEOUT)); if (i > PHY_ANEG_TIMEOUT)