From: Icenowy Zheng Date: Sat, 27 Aug 2016 14:16:13 +0000 (+0800) Subject: sunxi: Add iNet D978 rev2 defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6d973ad9d2329ec43334304ecd2cb044e173d4c4;p=u-boot.git sunxi: Add iNet D978 rev2 defconfig The iNet D978 rev2 is a tablet board designed by iNet, which is intended to use on 10" tablets with a appearance like Apple iPad. It has A33 SoC, 1GB RAM, 8GB/16GB NAND, SDIO Wi-Fi, a MicroUSB port and a MicroSD slot. Signed-off-by: Icenowy Zheng Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 7072bd8525..cf4d4fb5b7 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -156,6 +156,11 @@ M: Michal Suchanek S: Maintained F: configs/iNet_86VS_defconfig +INET D978 BOARD +M: Icenowy Zheng +S: Maintained +F: configs/iNet_D978_rev2_defconfig + LAMOBO-R1 BOARD M: Jelle de Jong S: Maintained diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig new file mode 100644 index 0000000000..d87a61ce93 --- /dev/null +++ b/configs/iNet_D978_rev2_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=456 +CONFIG_DRAM_ZQ=15291 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:65000,le:120,ri:180,up:22,lo:13,hs:20,vs:3,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-d978-rev2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_USB_MUSB_HOST=y