From: Patrick Delaunay Date: Tue, 5 Jul 2022 14:55:57 +0000 (+0200) Subject: ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6cccc8d396bfd68bbf695b3b3c92e60b8bdf8b77;p=u-boot.git ARM: dts: stm32: add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Add a "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 The resources secured by RCC_TZCR.TZEN=1 are managed by OP-TEE and the associated SCMI services, reset and clock. These device trees are only supported with stm32mp15_defconfig, with OP-TEE, SCMI and without SPL support. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8f7ecfd0f6..0fcd00fb49 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1171,13 +1171,17 @@ dtb-$(CONFIG_STM32MP13x) += \ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157a-dk1.dtb \ + stm32mp157a-dk1-scmi.dtb \ stm32mp157a-icore-stm32mp1-ctouch2.dtb \ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ stm32mp157c-dk2.dtb \ + stm32mp157c-dk2-scmi.dtb \ stm32mp157c-ed1.dtb \ + stm32mp157c-ed1-scmi.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-ev1-scmi.dtb \ stm32mp157c-odyssey.dtb \ stm32mp15xx-dhcom-drc02.dtb \ stm32mp15xx-dhcom-pdk2.dtb \ diff --git a/arch/arm/dts/stm32mp15-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp15-scmi-u-boot.dtsi new file mode 100644 index 0000000000..314fc39a05 --- /dev/null +++ b/arch/arm/dts/stm32mp15-scmi-u-boot.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + */ + +/ { + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + gpio25 = &gpioz; + pinctrl0 = &pinctrl; + pinctrl1 = &pinctrl_z; + }; + + binman: binman { + multiple-images; + }; + + soc { + u-boot,dm-pre-reloc; + + ddr: ddr@5a003000 { + u-boot,dm-pre-reloc; + + compatible = "st,stm32mp1-ddr"; + + reg = <0x5a003000 0x550 + 0x5a004000 0x234>; + + status = "okay"; + }; + }; + + /* need PSCI for sysreset during board_f */ + psci { + u-boot,dm-pre-proper; + }; +}; + +&bsec { + u-boot,dm-pre-reloc; +}; + +&gpioa { + u-boot,dm-pre-reloc; +}; + +&gpiob { + u-boot,dm-pre-reloc; +}; + +&gpioc { + u-boot,dm-pre-reloc; +}; + +&gpiod { + u-boot,dm-pre-reloc; +}; + +&gpioe { + u-boot,dm-pre-reloc; +}; + +&gpiof { + u-boot,dm-pre-reloc; +}; + +&gpiog { + u-boot,dm-pre-reloc; +}; + +&gpioh { + u-boot,dm-pre-reloc; +}; + +&gpioi { + u-boot,dm-pre-reloc; +}; + +&gpioj { + u-boot,dm-pre-reloc; +}; + +&gpiok { + u-boot,dm-pre-reloc; +}; + +&gpioz { + u-boot,dm-pre-reloc; +}; + +&optee { + u-boot,dm-pre-proper; +}; + +&iwdg2 { + u-boot,dm-pre-reloc; +}; + +/* pre-reloc probe = reserve video frame buffer in video_reserve() */ +<dc { + u-boot,dm-pre-proper; +}; + +/* temp = waiting kernel update */ +&m4_rproc { + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_z { + u-boot,dm-pre-reloc; +}; + +&rcc { + u-boot,dm-pre-reloc; +}; + +&scmi { + u-boot,dm-pre-proper; +}; + +&usart1 { + resets = <&rcc USART1_R>; +}; + +&usart2 { + resets = <&rcc USART2_R>; +}; + +&usart3 { + resets = <&rcc USART3_R>; +}; + +&uart4 { + resets = <&rcc UART4_R>; +}; + +&uart5 { + resets = <&rcc UART5_R>; +}; + +&usart6 { + resets = <&rcc USART6_R>; +}; + +&uart7 { + resets = <&rcc UART7_R>; +}; + +&uart8{ + resets = <&rcc UART8_R>; +}; diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi new file mode 100644 index 0000000000..2db045e7ce --- /dev/null +++ b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2022 + */ + +#include +#include "stm32mp15-scmi-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" + +/ { + aliases { + i2c3 = &i2c4; + usb0 = &usbotg_hs; + }; + + config { + u-boot,boot-led = "heartbeat"; + u-boot,error-led = "error"; + u-boot,mmc-env-partition = "u-boot-env"; + st,adc_usb_pd = <&adc1 18>, <&adc1 19>; + st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + + led { + red { + label = "error"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + status = "okay"; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins1 { + u-boot,dm-pre-reloc; + }; + pins2 { + u-boot,dm-pre-reloc; + /* pull-up on rx to avoid floating level */ + bias-pull-up; + }; +}; + +&usbotg_hs { + u-boot,force-b-session-valid; +}; diff --git a/arch/arm/dts/stm32mp157c-dk2-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-scmi-u-boot.dtsi new file mode 100644 index 0000000000..5a8fc15ab2 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-dk2-scmi-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2022 + */ + +#include "stm32mp157a-dk1-scmi-u-boot.dtsi" diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi new file mode 100644 index 0000000000..54662f7e29 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2022 + */ + +#include +#include "stm32mp15-scmi-u-boot.dtsi" +#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" + +/ { + aliases { + i2c3 = &i2c4; + }; + + config { + u-boot,boot-led = "heartbeat"; + u-boot,error-led = "error"; + u-boot,mmc-env-partition = "u-boot-env"; + st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + + led { + red { + label = "error"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + status = "okay"; + }; + }; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins1 { + u-boot,dm-pre-reloc; + }; + pins2 { + u-boot,dm-pre-reloc; + /* pull-up on rx to avoid floating level */ + bias-pull-up; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-ev1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-scmi-u-boot.dtsi new file mode 100644 index 0000000000..71a94f9130 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ev1-scmi-u-boot.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2022 + */ + +#include "stm32mp157c-ed1-scmi-u-boot.dtsi" + +/ { + aliases { + gpio26 = &stmfx_pinctrl; + i2c1 = &i2c2; + i2c4 = &i2c5; + pinctrl2 = &stmfx_pinctrl; + spi0 = &qspi; + usb0 = &usbotg_hs; + }; +}; diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 00f9b45442..3759df353e 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -77,6 +77,16 @@ Currently the following boards are supported: + stm32mp157c-ev1.dts + stm32mp15xx-dhcor-avenger96.dts +The SCMI variant of each board is supported by a specific "scmi" device tree: + + stm32mp157a-dk1-scmi.dts + + stm32mp157c-dk2-scmi.dts + + stm32mp157c-ed1-scmi.dts + + stm32mp157c-ev1-scmi.dts + +SCMI variant is used only with stm32mp15_defconfig, when the resources are +secured with RCC_TZCR.TZEN=1 in OP-TEE. The access to these reset and clock +resources are provided by OP-TEE and the associated SCMI services. + STM32MP13x `````````` @@ -136,6 +146,9 @@ TF-A_ (BL2) initialize the DDR and loads the next stage binaries from a FIP file the secure monitor to access to secure resources. + HW_CONFIG: The hardware configuration file = the U-Boot device tree +The scmi variant of each device tree is only support with OP-TEE as secure +monitor, with stm32mp15_defconfig. + The **Basic** boot chain with SPL (for STM32MP15x) `````````````````````````````````````````````````` @@ -248,6 +261,12 @@ Build Procedure a) trusted boot with FIP on STM32MP15x ev1:: + # export KBUILD_OUTPUT=stm32mp15 + # make stm32mp15_defconfig + # make DEVICE_TREE=stm32mp157c-ev1-scmi all + + or without SCMI support + # export KBUILD_OUTPUT=stm32mp15 # make stm32mp15_defconfig # make DEVICE_TREE=stm32mp157c-ev1 all