From: Patrice Chotard <patrice.chotard@st.com>
Date: Mon, 9 Oct 2017 09:41:24 +0000 (+0200)
Subject: dm: clk: fix PWR_CR3 register's bit 2 name
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6c1bf6c442612135bbabe0112060c8bae86fdfbc;p=u-boot.git

dm: clk: fix PWR_CR3 register's bit 2 name

Fix bit 2 name of PWR_CR3 register to match with the
last STM32H7 reference manual available here :

http://www.st.com/content/st_com/en/support/resources/
resource-selector.html?querycriteria=productId=SS1951$$
resourceCategory=technical_literature$$resourceType=reference_manual

Update also comment about voltage scaling 1 values

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
---

diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c
index 757882219a..f84a4d2b2f 100644
--- a/drivers/clk/clk_stm32h7.c
+++ b/drivers/clk/clk_stm32h7.c
@@ -109,7 +109,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define		QSPISRC_PER_CK		3
 
 #define PWR_CR3				0x0c
-#define PWR_CR3_SDEN			BIT(2)
+#define PWR_CR3_SCUEN			BIT(2)
 #define PWR_D3CR			0x18
 #define PWR_D3CR_VOS_MASK		GENMASK(15, 14)
 #define PWR_D3CR_VOS_SHIFT		14
@@ -361,11 +361,11 @@ int configure_clocks(struct udevice *dev)
 	writel(0x0, &regs->d2ccip1r);
 	writel(0x0, &regs->d2ccip2r);
 
-	/* Set voltage scaling at scale 1 */
+	/* Set voltage scaling at scale 1 (1,15 - 1,26 Volts) */
 	clrsetbits_le32(pwr_base + PWR_D3CR, PWR_D3CR_VOS_MASK,
 			VOS_SCALE_1 << PWR_D3CR_VOS_SHIFT);
-	/* disable step down converter */
-	clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SDEN);
+	/* Lock supply configuration update */
+	clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SCUEN);
 	while (!(readl(pwr_base + PWR_D3CR) & PWR_D3CR_VOSREADY))
 		;