From: wdenk Date: Wed, 12 May 2004 22:18:31 +0000 (+0000) Subject: Fix minor network problem on MPC5200 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6c1362cf637ccaa89806edf70f000009672c509e;p=u-boot.git Fix minor network problem on MPC5200 --- diff --git a/CHANGELOG b/CHANGELOG index 5e9c5e508d..a3280e964e 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Fix minor network problem on MPC5200: need some delay between + resetting the PHY and sending the first packet. Implemented in a + "natural" way by invoking the PHY reset and initialization code + only once after power on vs. each time the interface is brought up. + * Add some limited support for low-speed devices to SL811 USB controller (at least "usb reset" now passes successfully and "usb info" displays correct information) diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 1df394aaf5..5355a8131b 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -238,7 +238,6 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) DECLARE_GLOBAL_DATA_PTR; mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init... Begin\n"); @@ -250,17 +249,6 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) mpc5xxx_fec_rbd_init(fec); mpc5xxx_fec_tbd_init(fec); - /* - * Initialize GPIO pins - */ - if (fec->xcv_type == SEVENWIRE) { - /* 10MBit with 7-wire operation */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; - } else { - /* 100MBit with MD operation */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; - } - /* * Clear FEC-Lite interrupt event register(IEVENT) */ @@ -371,6 +359,68 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) *(int *)FEC_TBD_NEXT = (int)fec->tbdBase; *(int *)FEC_RBD_NEXT = (int)fec->rbdBase; + /* + * Enable FEC-Lite controller + */ + fec->eth->ecntrl |= 0x00000006; + +#if (DEBUG & 0x2) + if (fec->xcv_type != SEVENWIRE) + mpc5xxx_fec_phydump (); +#endif + + /* + * Enable SmartDMA receive task + */ + SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); + +#if (DEBUG & 0x1) + printf("mpc5xxx_fec_init... Done \n"); +#endif + + return 1; +} + +/********************************************************************/ +static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) +{ + DECLARE_GLOBAL_DATA_PTR; + mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; + const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ + +#if (DEBUG & 0x1) + printf ("mpc5xxx_fec_init_phy... Begin\n"); +#endif + + /* + * Initialize GPIO pins + */ + if (fec->xcv_type == SEVENWIRE) { + /* 10MBit with 7-wire operation */ + *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; + } else { + /* 100MBit with MD operation */ + *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; + } + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + fec->eth->ievent = 0xffffffff; + + /* + * Set interrupt mask register + */ + fec->eth->imask = 0x00000000; + + if (fec->xcv_type != SEVENWIRE) { + /* + * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock + * and do not drop the Preamble. + */ + fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ + } + if (fec->xcv_type != SEVENWIRE) { /* * Initialize PHY(LXT971A): @@ -486,23 +536,14 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) } - /* - * Enable FEC-Lite controller - */ - fec->eth->ecntrl |= 0x00000006; - #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc5xxx_fec_phydump (); #endif - /* - * Enable SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); #if (DEBUG & 0x1) - printf("mpc5xxx_fec_init... Done \n"); + printf("mpc5xxx_fec_init_phy... Done \n"); #endif return 1; @@ -859,6 +900,7 @@ int mpc5xxx_fec_initialize(bd_t * bis) mpc5xxx_fec_set_hwaddr(fec, env_enetaddr); } + mpc5xxx_fec_init_phy(dev, bis); return 1; }