From: Wolfgang Denk Date: Mon, 15 Aug 2005 13:55:00 +0000 (+0200) Subject: Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6bdf430660531aca5f88faeac8657d91595f5b38;p=u-boot.git Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005 --- diff --git a/CHANGELOG b/CHANGELOG index ce75e3cc20..700e8d6c07 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. + Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005 + * Check return value of malloc in 440gx_enet.c Patch by Travis B. Sawyer, 18 Jul 2005 diff --git a/CREDITS b/CREDITS index 1e5d8ba41c..f717d54a9e 100644 --- a/CREDITS +++ b/CREDITS @@ -29,6 +29,7 @@ D: ERIC Support N: Pantelis Antoniou E: panto@intracom.gr D: NETVIA & NETPHONE board support, ARTOS support. +D: Support for Silicon Turnkey eXpress XTc N: Pierre Aubert E: @@ -268,8 +269,9 @@ E: lo@routefree.com D: Support for DOS partitions N: Dan Malek -E: dan@netx4.com +E: dan@embeddedalley.com D: FADSROM, the grandfather of all of this +D: Support for Silicon Turnkey eXpress XTc N: Andrea "llandre" Marson E: andrea.marson@dave-tech.it diff --git a/MAINTAINERS b/MAINTAINERS index 5682f13bd4..cc99ca7aa7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -215,6 +215,7 @@ Jon Loeliger Dan Malek STxGP3 MPC85xx + STxXTc MPC8xx Eran Man diff --git a/Makefile b/Makefile index 832e552f88..ab302768cf 100644 --- a/Makefile +++ b/Makefile @@ -644,6 +644,9 @@ SM850_config : unconfig SPD823TS_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx spd8xx +stxxtc_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8xx stxxtc + svm_sc8xx_config: unconfig @ >include/config.h @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile new file mode 100644 index 0000000000..8c529a0611 --- /dev/null +++ b/board/stxxtc/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/stxxtc/config.mk b/board/stxxtc/config.mk new file mode 100644 index 0000000000..f5dc034250 --- /dev/null +++ b/board/stxxtc/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# STx XTc +# + +TEXT_BASE = 0x40F00000 diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c new file mode 100644 index 0000000000..b38b4bea47 --- /dev/null +++ b/board/stxxtc/stxxtc.c @@ -0,0 +1,638 @@ +/* + * (C) Copyright 2000-2004 + * Pantelis Antoniou, Intracom S.A., panto@intracom.gr + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2005 + * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * U-Boot port on STx XTc board + * Mostly copied from Netta + */ + +#include +#include + +#include "mpc8xx.h" + +#ifdef CONFIG_HW_WATCHDOG +#include +#endif + +/****************************************************************/ + +/* some sane bit macros */ +#define _BD(_b) (1U << (31-(_b))) +#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) + +#define _BW(_b) (1U << (15-(_b))) +#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) + +#define _BB(_b) (1U << (7-(_b))) +#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) + +#define _B(_b) _BD(_b) +#define _BR(_l, _h) _BDR(_l, _h) + +/****************************************************************/ + +/* + * Check Board Identity: + * + * Return 1 always. + */ + +int checkboard(void) +{ + printf ("Silicon Turnkey eXpress XTc\n"); + return (0); +} + +/****************************************************************/ + +#define _NOT_USED_ 0xFFFFFFFF + +/****************************************************************/ + +#define CS_0000 0x00000000 +#define CS_0001 0x10000000 +#define CS_0010 0x20000000 +#define CS_0011 0x30000000 +#define CS_0100 0x40000000 +#define CS_0101 0x50000000 +#define CS_0110 0x60000000 +#define CS_0111 0x70000000 +#define CS_1000 0x80000000 +#define CS_1001 0x90000000 +#define CS_1010 0xA0000000 +#define CS_1011 0xB0000000 +#define CS_1100 0xC0000000 +#define CS_1101 0xD0000000 +#define CS_1110 0xE0000000 +#define CS_1111 0xF0000000 + +#define BS_0000 0x00000000 +#define BS_0001 0x01000000 +#define BS_0010 0x02000000 +#define BS_0011 0x03000000 +#define BS_0100 0x04000000 +#define BS_0101 0x05000000 +#define BS_0110 0x06000000 +#define BS_0111 0x07000000 +#define BS_1000 0x08000000 +#define BS_1001 0x09000000 +#define BS_1010 0x0A000000 +#define BS_1011 0x0B000000 +#define BS_1100 0x0C000000 +#define BS_1101 0x0D000000 +#define BS_1110 0x0E000000 +#define BS_1111 0x0F000000 + +#define GPL0_AAAA 0x00000000 +#define GPL0_AAA0 0x00200000 +#define GPL0_AAA1 0x00300000 +#define GPL0_000A 0x00800000 +#define GPL0_0000 0x00A00000 +#define GPL0_0001 0x00B00000 +#define GPL0_111A 0x00C00000 +#define GPL0_1110 0x00E00000 +#define GPL0_1111 0x00F00000 + +#define GPL1_0000 0x00000000 +#define GPL1_0001 0x00040000 +#define GPL1_1110 0x00080000 +#define GPL1_1111 0x000C0000 + +#define GPL2_0000 0x00000000 +#define GPL2_0001 0x00010000 +#define GPL2_1110 0x00020000 +#define GPL2_1111 0x00030000 + +#define GPL3_0000 0x00000000 +#define GPL3_0001 0x00004000 +#define GPL3_1110 0x00008000 +#define GPL3_1111 0x0000C000 + +#define GPL4_0000 0x00000000 +#define GPL4_0001 0x00001000 +#define GPL4_1110 0x00002000 +#define GPL4_1111 0x00003000 + +#define GPL5_0000 0x00000000 +#define GPL5_0001 0x00000400 +#define GPL5_1110 0x00000800 +#define GPL5_1111 0x00000C00 +#define LOOP 0x00000080 + +#define EXEN 0x00000040 + +#define AMX_COL 0x00000000 +#define AMX_ROW 0x00000020 +#define AMX_MAR 0x00000030 + +#define NA 0x00000008 + +#define UTA 0x00000004 + +#define TODT 0x00000002 + +#define LAST 0x00000001 + +#define A10_AAAA GPL0_AAAA +#define A10_AAA0 GPL0_AAA0 +#define A10_AAA1 GPL0_AAA1 +#define A10_000A GPL0_000A +#define A10_0000 GPL0_0000 +#define A10_0001 GPL0_0001 +#define A10_111A GPL0_111A +#define A10_1110 GPL0_1110 +#define A10_1111 GPL0_1111 + +#define RAS_0000 GPL1_0000 +#define RAS_0001 GPL1_0001 +#define RAS_1110 GPL1_1110 +#define RAS_1111 GPL1_1111 + +#define CAS_0000 GPL2_0000 +#define CAS_0001 GPL2_0001 +#define CAS_1110 GPL2_1110 +#define CAS_1111 GPL2_1111 + +#define WE_0000 GPL3_0000 +#define WE_0001 GPL3_0001 +#define WE_1110 GPL3_1110 +#define WE_1111 GPL3_1111 + +/* #define CAS_LATENCY 3 */ +#define CAS_LATENCY 2 + +const uint sdram_table[0x40] = { + +#if CAS_LATENCY == 3 + /* RSS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ + CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ + _NOT_USED_, _NOT_USED_, + + /* RBS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ + CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* WSS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* WBS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ + CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, +#endif + +#if CAS_LATENCY == 2 + /* RSS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ + CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, + + /* RBS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ + CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* WSS */ + CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ + CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, + _NOT_USED_, + + /* WBS */ + CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ + CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ + CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */ + CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ + CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, + +#endif + + /* UPT */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */ + CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, + + /* EXC */ + CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST, + _NOT_USED_, + + /* REG */ + CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA, + CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST, +}; + +static const uint nandcs_table[0x40] = { + /* RSS */ + CS_1000 | GPL4_1111 | GPL5_1111 | UTA, + CS_0000 | GPL4_1110 | GPL5_1111 | UTA, + CS_0000 | GPL4_0000 | GPL5_1111 | UTA, + CS_0000 | GPL4_0000 | GPL5_1111 | UTA, + CS_0000 | GPL4_0000 | GPL5_1111, + CS_0000 | GPL4_0001 | GPL5_1111 | UTA, + CS_0000 | GPL4_1111 | GPL5_1111 | UTA, + CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */ + + /* RBS */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* WSS */ + CS_1000 | GPL4_1111 | GPL5_1110 | UTA, + CS_0000 | GPL4_1111 | GPL5_0000 | UTA, + CS_0000 | GPL4_1111 | GPL5_0000 | UTA, + CS_0000 | GPL4_1111 | GPL5_0000 | UTA, + CS_0000 | GPL4_1111 | GPL5_0001 | UTA, + CS_0000 | GPL4_1111 | GPL5_1111 | UTA, + CS_0000 | GPL4_1111 | GPL5_1111, + CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, + + /* WBS */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* UPT */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* EXC */ + CS_0001 | LAST, + _NOT_USED_, + + /* REG */ + CS_1110 , + CS_0001 | LAST, +}; + +/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ +/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */ +#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU) + +/* 9 */ +#define CFG_MAMR ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +void check_ram(unsigned int addr, unsigned int size) +{ + unsigned int i, j, v, vv; + volatile unsigned int *p; + unsigned int pv; + + p = (unsigned int *)addr; + pv = (unsigned int)p; + for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int)) + *p++ = pv; + + p = (unsigned int *)addr; + for (i = 0; i < size / sizeof(unsigned int); i++) { + v = (unsigned int)p; + vv = *p; + if (vv != v) { + printf("%p: read %08x instead of %08x\n", p, vv, v); + hang(); + } + p++; + } + + for (j = 0; j < 5; j++) { + switch (j) { + case 0: v = 0x00000000; break; + case 1: v = 0xffffffff; break; + case 2: v = 0x55555555; break; + case 3: v = 0xaaaaaaaa; break; + default:v = 0xdeadbeef; break; + } + p = (unsigned int *)addr; + for (i = 0; i < size / sizeof(unsigned int); i++) { + *p = v; + vv = *p; + if (vv != v) { + printf("%p: read %08x instead of %08x\n", p, vv, v); + hang(); + } + *p = ~v; + p++; + } + } +} + +#define DO_LOOP do { for (;;) asm volatile ("nop" : : : "memory"); } while(0) + +long int initdram(int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size; + u32 d1, d2; + + upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0])); + + /* + * Preliminary prescaler for refresh + */ + memctl->memc_mptpr = MPTPR_PTP_DIV8; + + memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ + + /* + * Map controller bank 3 to the SDRAM bank at preliminary address. + */ + memctl->memc_or4 = CFG_OR4_PRELIM; + memctl->memc_br4 = CFG_BR4_PRELIM; + + memctl->memc_mamr = CFG_MAMR & ~MAMR_PTAE; /* no refresh yet */ + + udelay(200); + + /* perform SDRAM initialisation sequence */ + memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */ + udelay(1); + + memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */ + udelay(1); + + memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS4 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/ + udelay(1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay(10000); + + + d1 = 0xAA55AA55; + *(volatile u32 *)0 = d1; + d2 = *(volatile u32 *)0; + if (d1 != d2) { + printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); + DO_LOOP; + } + + d1 = 0x55AA55AA; + *(volatile u32 *)0 = d1; + d2 = *(volatile u32 *)0; + if (d1 != d2) { + printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); + DO_LOOP; + } + + d1 = 0x12345678; + *(volatile u32 *)0 = d1; + d2 = *(volatile u32 *)0; + if (d1 != d2) { + printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); + DO_LOOP; + } + + size = get_ram_size((long *)0, SDRAM_MAX_SIZE); + + return size; +} + +/* ------------------------------------------------------------------------- */ + +void reset_phys(void) +{ + int phyno; + unsigned short v; + + udelay(10000); + /* reset the damn phys */ + mii_init(); + + for (phyno = 0; phyno < 32; ++phyno) { + miiphy_read(phyno, PHY_PHYIDR1, &v); + if (v == 0xFFFF) + continue; + miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD); + udelay(10000); + miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON); + udelay(10000); + } +} + +/* ------------------------------------------------------------------------- */ + +/* GP = general purpose, SP = special purpose (on chip peripheral) */ + +/* bits that can have a special purpose or can be configured as inputs/outputs */ +#define PA_GP_INMASK _BW(6) +#define PA_GP_OUTMASK (_BW(7)) +#define PA_SP_MASK 0 +#define PA_ODR_VAL 0 +#define PA_GP_OUTVAL (_BW(7)) +#define PA_SP_DIRVAL 0 + +#define PB_GP_INMASK 0 +#define PB_GP_OUTMASK (_B(23)) +#define PB_SP_MASK 0 +#define PB_ODR_VAL 0 +#define PB_GP_OUTVAL (_B(23)) +#define PB_SP_DIRVAL 0 + +#define PC_GP_INMASK 0 +#define PC_GP_OUTMASK (_BW(15)) + +#define PC_SP_MASK 0 +#define PC_SOVAL 0 +#define PC_INTVAL 0 +#define PC_GP_OUTVAL 0 +#define PC_SP_DIRVAL 0 + +#define PE_GP_INMASK 0 +#define PE_GP_OUTMASK 0 +#define PE_GP_OUTVAL 0 + +#define PE_SP_MASK 0 +#define PE_ODR_VAL 0 +#define PE_SP_DIRVAL 0 + +int board_early_init_f(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile iop8xx_t *ioport = &immap->im_ioport; + volatile cpm8xx_t *cpm = &immap->im_cpm; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + (void)ioport; + (void)cpm; +#if 1 + /* NAND chip select */ + upmconfig(UPMB, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0])); + memctl->memc_or2 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS); + memctl->memc_br2 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMB); + memctl->memc_mbmr = 0; /* all clear */ +#endif + + memctl->memc_br5 &= ~BR_V; + memctl->memc_br6 &= ~BR_V; + memctl->memc_br7 &= ~BR_V; + +#if 1 + ioport->iop_padat = PA_GP_OUTVAL; + ioport->iop_paodr = PA_ODR_VAL; + ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; + ioport->iop_papar = PA_SP_MASK; + + cpm->cp_pbdat = PB_GP_OUTVAL; + cpm->cp_pbodr = PB_ODR_VAL; + cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; + cpm->cp_pbpar = PB_SP_MASK; + + ioport->iop_pcdat = PC_GP_OUTVAL; + ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; + ioport->iop_pcso = PC_SOVAL; + ioport->iop_pcint = PC_INTVAL; + ioport->iop_pcpar = PC_SP_MASK; + + cpm->cp_pedat = PE_GP_OUTVAL; + cpm->cp_peodr = PE_ODR_VAL; + cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL; + cpm->cp_pepar = PE_SP_MASK; +#endif + + return 0; +} + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include + +extern ulong nand_probe(ulong physadr); +extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; + +void nand_init(void) +{ + unsigned long totlen; + + totlen = nand_probe(CFG_NAND_BASE); + printf ("%4lu MB\n", totlen >> 20); +} +#endif + +#ifdef CONFIG_HW_WATCHDOG + +void hw_watchdog_reset(void) +{ + /* XXX add here the really funky stuff */ +} + +#endif + +#ifdef CONFIG_SHOW_ACTIVITY + +/* called from timer interrupt every 1/CFG_HZ sec */ +void board_show_activity(ulong timestamp) +{ +} + +/* called when looping */ +void show_activity(int arg) +{ +} + +#endif + +#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE) +int overwrite_console(void) +{ + /* printf("overwrite_console called\n"); */ + return 0; +} +#endif + +extern int drv_phone_init(void); +extern int drv_phone_use_me(void); +extern int drv_phone_is_idle(void); + +int misc_init_r(void) +{ + return 0; +} + +int last_stage_init(void) +{ + reset_phys(); + + return 0; +} diff --git a/board/stxxtc/u-boot.lds b/board/stxxtc/u-boot.lds new file mode 100644 index 0000000000..c3dac0ef4a --- /dev/null +++ b/board/stxxtc/u-boot.lds @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8xx/start.o (.text) + cpu/mpc8xx/traps.o (.text) + common/dlmalloc.o (.text) + lib_ppc/ppcstring.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + lib_ppc/cache.o (.text) + lib_ppc/time.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/stxxtc/u-boot.lds.debug b/board/stxxtc/u-boot.lds.debug new file mode 100644 index 0000000000..21b7e6aabc --- /dev/null +++ b/board/stxxtc/u-boot.lds.debug @@ -0,0 +1,135 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mpc8xx/start.o (.text) + common/dlmalloc.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + + . = env_offset; + common/environment.o(.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/doc/README.stxxtc b/doc/README.stxxtc new file mode 100644 index 0000000000..7d9d4d3a2e --- /dev/null +++ b/doc/README.stxxtc @@ -0,0 +1,59 @@ + + +First, some build notes on the Silicon Turnkey eXpress XTc. + +This board has both 87x/88x procesor options at various +frequencies. The configuration file has some macros for setting +the clock speed, not all have been tested. They all have +a 10MHz input clock. Please do not check in a configuration +file that selects a high speed not available on all processors. +We chose the 66MHz core and bus speed, which should be OK on +all boards. If you have a processor, lucky you! :-) +Just build a new configuration with that speed, check +the macro configuration to ensure it's correct. If the +macro is updated, please check that in, but keep default +processor speed. + +The board is likely to have more than 1Mbyte of NOR boot flash. +It was also configured with a high boot vector (Dan's fault) +so the standard 8xx mapping doesn't work well. We had to move +the addresses around a little bit so one copy would work. The +flash got fragmented, and we are working on a better solution. +There is an "xtc.cfg" floating around for the BDI2000, use +that for programming a new version of U-Boot. You can probably +find it on the Silicon Turnkey eXpress (www.silicontkx.com), +Embedded Alley Solutions (embeddedalley.com), or Denx (denx.de) +servers. + +The board will also have various SDRAM sizes, but the code +should automatically determine the amount of memory. + +There are a couple of different board versions, visually +they use different BGA or surface mount memory parts. However, +they are logically the same board. + +Now, some operational notes. + +The board has the option of sporting two FEC Ethernet ports. +The second port isn't configured to be automatically available +because it would cause U-Boot to generate a board data structure +(the bd_t) with multiple MAC addresses and be incompatible with +standard 8xx kernel builds. You can use/test the second FEC +in U-Boot by assigning an 'eth1addr' and selecting the second +FEC as the port to use. + +Since this is just a development board and not a product, STx +does not assign unique MAC addresses. We just pilfer the +"default" ones used by Wolfgang on some other boards. Please +ensure you assign unique MAC addresses when using these boards. + +The serial port baud rate is 38400, because that's the way +I like it :-) + +Thanks to Pantelis for lots of the work on this board port. + +Have Fun! + + -- Dan + +15 August 2005 diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h new file mode 100644 index 0000000000..a0e1ba7f17 --- /dev/null +++ b/include/configs/stxxtc.h @@ -0,0 +1,592 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com + * U-Boot port on STx XTc 8xx board + * Mostly copied from Panto's NETTA2 board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC875 1 /* This is a MPC875 CPU */ +#define CONFIG_STXXTC 1 /* ...on a STx XTc board */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ + +#define CONFIG_XIN 10000000 /* 10 MHz input xtal */ + +/* Select one of few clock rates defined later in this file. +*/ +/* #define MPC8XX_HZ 50000000 */ +#define MPC8XX_HZ 66666666 + +#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "tftpboot; " \ + "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ + "bootm" + +#define CONFIG_AUTOSCRIPT +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) + +#undef CONFIG_MAC_PARTITION +#undef CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */ +#define FEC_ENET 1 /* eth.c needs it that way... */ +#undef CFG_DISCOVER_PHY +#define CONFIG_MII 1 +#undef CONFIG_RMII + +#define CONFIG_ETHER_ON_FEC1 1 +#define CONFIG_FEC1_PHY 1 /* phy address of FEC */ +#undef CONFIG_FEC1_PHY_NORXERR + +#define CONFIG_ETHER_ON_FEC2 1 +#define CONFIG_FEC2_PHY 3 +#undef CONFIG_FEC2_PHY_NORXERR + +#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_NAND | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_MII | \ + CFG_CMD_NFS) + +#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_MISC_INIT_R + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "xtc> " /* Monitor Command Prompt */ + +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0300000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#if defined(DEBUG) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#else +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#endif + +/* yes this is weird, I know :) */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE | 0x00F00000) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +#define CFG_RESET_ADDRESS 0x80000000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE 0x10000 + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00000000) +#define CFG_ENV_OFFSET 0 +#define CFG_ENV_SIZE 0x4000 + +#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + 0x00010000) +#define CFG_ENV_OFFSET_REDUND 0 +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 } + +#define CFG_FLASH_PROTECTION + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + */ + +#if CONFIG_XIN == 10000000 + +#if MPC8XX_HZ == 50000000 +#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ + (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ + PLPRCR_TEXPS) +#elif MPC8XX_HZ == 66666666 +#define CFG_PLPRCR ((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \ + (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ + PLPRCR_TEXPS) +#else +#error unsupported CPU freq for XIN = 10MHz +#endif +#else +#error unsupported freq for XIN (must be 10MHz) +#endif + + +/* + *----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + * + * Note: When TBS == 0 the timebase is independent of current cpu clock. + */ + +#define SCCR_MASK SCCR_EBDF11 +#if MPC8XX_HZ > 66666666 +#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00 | SCCR_EBDF01) +#else +#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) +#endif + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +/*#define CFG_DER 0x2002000F*/ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x42000000 /* FLASH bank #1 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ + +#define FLASH_BANK_MAX_SIZE 0x01000000 /* max size per chip */ + +#define CFG_REMAP_OR_AM 0x80000000 +#define CFG_PRELIM_OR_AM (0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) + +/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ +#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) + +#define CFG_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CFG_OR_TIMING_FLASH) +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) + +/* + * BR4 and OR4 (SDRAM) + * + */ +#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) + +#define CFG_OR4_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM) +#define CFG_BR4_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V) + +/* + * Memory Periodic Timer Prescaler + */ + +/* + * Memory Periodic Timer Prescaler + * + * The Divider for PTA (refresh timer) configuration is based on an + * example SDRAM configuration (64 MBit, one bank). The adjustment to + * the number of chip selects (NCS) and the actually needed refresh + * rate is done by setting MPTPR. + * + * PTA is calculated from + * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) + * + * gclk CPU clock (not bus clock!) + * Trefresh Refresh cycle * 4 (four word bursts used) + * + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + */ + +#define CFG_MAMR_PTA 234 + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ + +/****************************************************************/ + +#define NAND_SIZE 0x00010000 /* 64K */ +#define NAND_BASE 0xF1000000 + +/****************************************************************/ + +/* NAND */ +#define CFG_NAND_BASE NAND_BASE +#define CONFIG_MTD_NAND_ECC_JFFS2 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_MTD_NAND_UNSAFE + +#define CFG_MAX_NAND_DEVICE 1 +#undef NAND_NO_RB + +#define SECTORSIZE 512 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */ +#define NAND_DISABLE_CE(nand) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) |= (1 << (15 - 7)); \ + } while(0) + +#define NAND_ENABLE_CE(nand) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \ + } while(0) + +#define NAND_CTL_CLRALE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \ + } while(0) + +#define NAND_CTL_SETALE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) |= (1 << (15 - 15)); \ + } while(0) + +#define NAND_CTL_CLRCLE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \ + } while(0) + +#define NAND_CTL_SETCLE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) |= (1 << (31 - 23)); \ + } while(0) + +#ifndef NAND_NO_RB +#define NAND_WAIT_READY(nand) \ + do { \ + int _tries = 0; \ + while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \ + if (++_tries > 100000) \ + break; \ + } while (0) +#else +#define NAND_WAIT_READY(nand) udelay(12) +#endif + +#define WRITE_NAND_COMMAND(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define WRITE_NAND_ADDRESS(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define WRITE_NAND(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define READ_NAND(adr) \ + ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) + +/*****************************************************************************/ + +#define CFG_DIRECT_FLASH_TFTP +#define CFG_DIRECT_NAND_TFTP + +/*****************************************************************************/ + +/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB, + * CxOE and CxRESET. We use the CxOE. + */ +#define STATUS_LED_BIT 0x00000080 /* bit 24 */ + +#define STATUS_LED_PERIOD (CFG_HZ / 2) +#define STATUS_LED_STATE STATUS_LED_BLINKING + +#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ +#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + +#ifndef __ASSEMBLY__ + +/* LEDs */ + +/* led_id_t is unsigned int mask */ +typedef unsigned int led_id_t; + +#define __led_toggle(_msk) \ + do { \ + ((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \ + } while(0) + +#define __led_set(_msk, _st) \ + do { \ + if ((_st)) \ + ((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \ + else \ + ((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \ + } while(0) + +#define __led_init(msk, st) __led_set(msk, st) + +#endif + +/******************************************************************************/ + +#define CFG_CONSOLE_IS_IN_ENV 1 +#define CFG_CONSOLE_OVERWRITE_ROUTINE 1 +#define CFG_CONSOLE_ENV_OVERWRITE 1 + +/******************************************************************************/ + +/* use board specific hardware */ +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_HW_WATCHDOG +#define CONFIG_SHOW_ACTIVITY + +/*****************************************************************************/ + +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_CRC32_VERIFY 1 +#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 + +/* Note: change below for your network setting!!! + * This was done just to facilitate manufacturing test and configuration. + */ +#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a + +#define CONFIG_SERVERIP 192.168.08.1 +#define CONFIG_IPADDR 192.168.08.85 +#define CONFIG_GATEWAYIP 192.168.08.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_HOSTNAME stx_xtc +#define CONFIG_ROOTPATH /xtcroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_LOADADDR 0x1000000 + + +#endif /* __CONFIG_H */ diff --git a/include/status_led.h b/include/status_led.h index b80780a690..a56883b9a5 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -336,6 +336,9 @@ void status_led_set (int led, int state); /***** NetPhone ********************************************************/ #elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) /* XXX empty just to avoid the error */ +/***** STx XTc ********************************************************/ +#elif defined(CONFIG_STXXTC) +/* XXX empty just to avoid the error */ /***** sbc8240 ********************************************************/ #elif defined(CONFIG_WRSBC8240) /* XXX empty just to avoid the error */