From: York Sun Date: Thu, 19 Mar 2015 16:30:27 +0000 (-0700) Subject: driver/ddr/fsl: Fix driver to support empty first slot X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6b95be228024c7d15b9164b59187ef02333bb0c8;p=u-boot.git driver/ddr/fsl: Fix driver to support empty first slot CS0 was not allowed to be empty by u-boot driver in the past to simplify the driver. This may be inconvenient for some debugging. This patch lifts the restrictions. Controller interleaving still requires CS0 populated. Signed-off-by: York Sun --- diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index a59824c036..8367c95cf8 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -1116,8 +1116,14 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr, int i; unsigned short esdmode4 = 0; /* Extended SDRAM mode 4 */ unsigned short esdmode5; /* Extended SDRAM mode 5 */ + int rtt_park = 0; - esdmode5 = 0x00000500; /* Data mask enabled */ + if (ddr->cs[0].config & SDRAM_CS_CONFIG_EN) { + esdmode5 = 0x00000500; /* Data mask enable, RTT_PARK CS0 */ + rtt_park = 1; + } else { + esdmode5 = 0x00000400; /* Data mask enabled */ + } ddr->ddr_sdram_mode_9 = (0 | ((esdmode4 & 0xffff) << 16) @@ -1125,11 +1131,17 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr, ); /* only mode_9 use 0x500, others use 0x400 */ - esdmode5 = 0x00000400; /* Data mask enabled */ debug("FSLDDR: ddr_sdram_mode_9) = 0x%08x\n", ddr->ddr_sdram_mode_9); if (unq_mrs_en) { /* unique mode registers are supported */ for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!rtt_park && + (ddr->cs[i].config & SDRAM_CS_CONFIG_EN)) { + esdmode5 |= 0x00000500; /* RTT_PARK */ + rtt_park = 1; + } else { + esdmode5 = 0x00000400; + } switch (i) { case 1: ddr->ddr_sdram_mode_11 = (0 @@ -1977,31 +1989,41 @@ static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, const dimm_params_t *dimm_params) { unsigned int acc_ecc_en = (ddr->ddr_sdram_cfg >> 2) & 0x1; + int i; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (dimm_params[i].n_ranks) + break; + } + if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) { + puts("DDR error: no DIMM found!\n"); + return; + } - ddr->dq_map_0 = ((dimm_params->dq_mapping[0] & 0x3F) << 26) | - ((dimm_params->dq_mapping[1] & 0x3F) << 20) | - ((dimm_params->dq_mapping[2] & 0x3F) << 14) | - ((dimm_params->dq_mapping[3] & 0x3F) << 8) | - ((dimm_params->dq_mapping[4] & 0x3F) << 2); + ddr->dq_map_0 = ((dimm_params[i].dq_mapping[0] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[1] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[2] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[3] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[4] & 0x3F) << 2); - ddr->dq_map_1 = ((dimm_params->dq_mapping[5] & 0x3F) << 26) | - ((dimm_params->dq_mapping[6] & 0x3F) << 20) | - ((dimm_params->dq_mapping[7] & 0x3F) << 14) | - ((dimm_params->dq_mapping[10] & 0x3F) << 8) | - ((dimm_params->dq_mapping[11] & 0x3F) << 2); + ddr->dq_map_1 = ((dimm_params[i].dq_mapping[5] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[6] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[7] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[10] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[11] & 0x3F) << 2); - ddr->dq_map_2 = ((dimm_params->dq_mapping[12] & 0x3F) << 26) | - ((dimm_params->dq_mapping[13] & 0x3F) << 20) | - ((dimm_params->dq_mapping[14] & 0x3F) << 14) | - ((dimm_params->dq_mapping[15] & 0x3F) << 8) | - ((dimm_params->dq_mapping[16] & 0x3F) << 2); + ddr->dq_map_2 = ((dimm_params[i].dq_mapping[12] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[13] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[14] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[15] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[16] & 0x3F) << 2); /* dq_map for ECC[4:7] is set to 0 if accumulated ECC is enabled */ - ddr->dq_map_3 = ((dimm_params->dq_mapping[17] & 0x3F) << 26) | - ((dimm_params->dq_mapping[8] & 0x3F) << 20) | + ddr->dq_map_3 = ((dimm_params[i].dq_mapping[17] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[8] & 0x3F) << 20) | (acc_ecc_en ? 0 : - (dimm_params->dq_mapping[9] & 0x3F) << 14) | - dimm_params->dq_mapping_ors; + (dimm_params[i].dq_mapping[9] & 0x3F) << 14) | + dimm_params[i].dq_mapping_ors; debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0); debug("FSLDDR: dq_map_1 = 0x%08x\n", ddr->dq_map_1); diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index bbfb4ee417..42834ca7b2 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -135,7 +135,8 @@ unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, if (spd->mem_type) { if (spd->mem_type != SPD_MEMTYPE_DDR4) { - printf("DIMM %u: is not a DDR4 SPD.\n", dimm_number); + printf("Ctrl %u DIMM %u: is not a DDR4 SPD.\n", + ctrl_num, dimm_number); return 1; } } else { diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index 57d14e896a..d23e6e5b97 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -512,7 +512,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -802,7 +802,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -844,6 +844,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(twot_en), CTRL_OPTIONS(threet_en), CTRL_OPTIONS(registered_dimm_en), + CTRL_OPTIONS(mirrored_dimm), CTRL_OPTIONS(ap_en), CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index b295344c4d..b12eeb9f01 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -22,7 +22,7 @@ compute_cas_latency(const unsigned int ctrl_num, unsigned int common_caslat; unsigned int caslat_actual; unsigned int retry = 16; - unsigned int tmp; + unsigned int tmp = ~0; const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #ifdef CONFIG_SYS_FSL_DDR3 const unsigned int taamax = 20000; @@ -31,8 +31,7 @@ compute_cas_latency(const unsigned int ctrl_num, #endif /* compute the common CAS latency supported between slots */ - tmp = dimm_params[0].caslat_x; - for (i = 1; i < number_of_dimms; i++) { + for (i = 0; i < number_of_dimms; i++) { if (dimm_params[i].n_ranks) tmp &= dimm_params[i].caslat_x; } diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 5beb11b02b..3b30fa284c 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -728,7 +728,12 @@ unsigned int populate_memctl_options(int all_dimms_registered, /* Choose ddr controller address mirror mode */ #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) - popts->mirrored_dimm = pdimm[0].mirrored_dimm; + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (pdimm[i].n_ranks) { + popts->mirrored_dimm = pdimm[i].mirrored_dimm; + break; + } + } #endif /* Global Timing Parameters. */