From: Francesco Dolcini Date: Fri, 24 Jun 2022 10:33:35 +0000 (+0200) Subject: mx6: ddr: Fix disabling on-die termination X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6b5ecb829391331bc1125c2b2033344b870ea5c3;p=u-boot.git mx6: ddr: Fix disabling on-die termination In case rtt_nom is set to 0 keep ODT disabled (MMDC MPODTCTRL = 0). No changes required for DDR MR1 Rtt_Nom impedance register, 0 value is already handled correctly. No board is currently affected by this change (rtt_nom != 0 on all i.MX6 ddr3 boards), this will be used by a follow-up change. Fixes: fe0f7f7842e1 ("mx6: add mmdc configuration for MX6Q/MX6DL") Signed-off-by: Francesco Dolcini Reviewed-by: Fabio Estevam Acked-by: Marcel Ziswiler --- diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c index 73a637c42d..3c87c57773 100644 --- a/arch/arm/mach-imx/mx6/ddr.c +++ b/arch/arm/mach-imx/mx6/ddr.c @@ -1469,8 +1469,17 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, MMDC1(mprddqby3dl, 0x33333333); } - /* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */ - val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227; + /* + * MMDC Termination: rtt_nom:2 RZQ/2(120ohm), + * rtt_nom:1 RZQ/4(60ohm), + * rtt_nom:0 Disabled + */ + if (sysinfo->rtt_nom == 0) + val = 0x00000000; + else if (sysinfo->rtt_nom == 2) + val = 0x00011117; + else + val = 0x00022227; mmdc0->mpodtctrl = val; if (sysinfo->dsize > 1) MMDC1(mpodtctrl, val);