From: Marek Vasut Date: Wed, 22 Oct 2014 19:34:50 +0000 (+0200) Subject: ppc: Zap IDS8247 board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6afb3574c90a8f62051a0cf816b71e799aa61b8e;p=u-boot.git ppc: Zap IDS8247 board This board is old and is using CONFIG_I2C_X, which is wrong. Signed-off-by: Marek Vasut Cc: Masahiro Yamada Cc: Tom Rini Cc: Wolfgang Denk Cc: Simon Glass Cc: Heiko Schocher --- diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig index 7f246ff5b9..7e28170a4a 100644 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ b/arch/powerpc/cpu/mpc8260/Kconfig @@ -52,9 +52,6 @@ config TARGET_MPC8266ADS config TARGET_VOVPN_GW bool "Support VoVPN-GW" -config TARGET_IDS8247 - bool "Support IDS8247" - config TARGET_KM82XX bool "Support km82xx" @@ -75,7 +72,6 @@ source "board/ep82xxm/Kconfig" source "board/freescale/mpc8266ads/Kconfig" source "board/funkwerk/vovpn-gw/Kconfig" source "board/gw8260/Kconfig" -source "board/ids/ids8247/Kconfig" source "board/iphase4539/Kconfig" source "board/keymile/km82xx/Kconfig" source "board/muas3001/Kconfig" diff --git a/board/ids/ids8247/Kconfig b/board/ids/ids8247/Kconfig deleted file mode 100644 index bbab727d78..0000000000 --- a/board/ids/ids8247/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_IDS8247 - -config SYS_BOARD - default "ids8247" - -config SYS_VENDOR - default "ids" - -config SYS_CONFIG_NAME - default "IDS8247" - -endif diff --git a/board/ids/ids8247/MAINTAINERS b/board/ids/ids8247/MAINTAINERS deleted file mode 100644 index 3173cdf01f..0000000000 --- a/board/ids/ids8247/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IDS8247 BOARD -M: Heiko Schocher -S: Maintained -F: board/ids/ids8247/ -F: include/configs/IDS8247.h -F: configs/IDS8247_defconfig diff --git a/board/ids/ids8247/Makefile b/board/ids/ids8247/Makefile deleted file mode 100644 index 99c47b6697..0000000000 --- a/board/ids/ids8247/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2005 -# Heiko Schocher, DENX Software Engineering, -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ids8247.o diff --git a/board/ids/ids8247/ids8247.c b/board/ids/ids8247/ids8247.c deleted file mode 100644 index 1b2d0e09a9..0000000000 --- a/board/ids/ids8247/ids8247.c +++ /dev/null @@ -1,390 +0,0 @@ -/* - * (C) Copyright 2005 - * Heiko Schocher, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#if defined(CONFIG_OF_LIBFDT) -#include -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ - /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */ -#if defined(CONFIG_SYS_I2C_SOFT) - /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */ - /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */ -#else /* normal I/O port pins */ - /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */ - /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ -#endif - /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */ - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ - /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */ - /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */ - /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */ - /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */ - /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ - /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ - /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ - /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ - /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ - /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */ - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ - /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ - /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */ - /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */ - /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */ - /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */ - /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */ - /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */ - /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */ - /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */ - /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */ - /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */ -#if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */ -#else /* normal I/O port pins */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */ - /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */ -#endif - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ - /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* Check Board Identity: - */ -int checkboard (void) -{ - puts ("Board: IDS 8247\n"); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) -{ - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; - ulong maxsize, size; - int i; - - /* We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff))/* / 2*/; - - sdmr_ptr = &memctl->memc_psdmr; - orx_ptr = &memctl->memc_or2; - - *orx_ptr = orx; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ - - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; - - size = get_ram_size((long *)base, maxsize); - *orx_ptr = orx | ~(size - 1); - - return (size); -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - - long psize; - - psize = 16 * 1024 * 1024; - - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - -#ifndef CONFIG_SYS_RAMBOOT - /* 60x SDRAM setup: - */ - psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2, - (uchar *) CONFIG_SYS_SDRAM_BASE); -#endif /* CONFIG_SYS_RAMBOOT */ - - icache_enable (); - - return (psize); -} - -int misc_init_r (void) -{ - gd->bd->bi_flashstart = 0xff800000; - return 0; -} - -#if defined(CONFIG_CMD_NAND) -#include -#include -#include - -static u8 hwctl; - -static void ids_nand_hwctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - if ( ctrl & NAND_CLE ) { - hwctl |= 0x1; - writeb(0x00, (this->IO_ADDR_W + 0x0a)); - } else { - hwctl &= ~0x1; - writeb(0x00, (this->IO_ADDR_W + 0x08)); - } - if ( ctrl & NAND_ALE ) { - hwctl |= 0x2; - writeb(0x00, (this->IO_ADDR_W + 0x09)); - } else { - hwctl &= ~0x2; - writeb(0x00, (this->IO_ADDR_W + 0x08)); - } - if ( (ctrl & NAND_NCE) != NAND_NCE) - writeb(0x00, (this->IO_ADDR_W + 0x0c)); - else - writeb(0x00, (this->IO_ADDR_W + 0x08)); - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); - -} - -static u_char ids_nand_read_byte(struct mtd_info *mtd) -{ - struct nand_chip *this = mtd->priv; - - return readb(this->IO_ADDR_R); -} - -static void ids_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *nand = mtd->priv; - int i; - - for (i = 0; i < len; i++) { - if (hwctl & 0x1) - writeb(buf[i], (nand->IO_ADDR_W + 0x02)); - else if (hwctl & 0x2) - writeb(buf[i], (nand->IO_ADDR_W + 0x01)); - else - writeb(buf[i], nand->IO_ADDR_W); - } -} - -static void ids_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) -{ - struct nand_chip *this = mtd->priv; - int i; - - for (i = 0; i < len; i++) { - buf[i] = readb(this->IO_ADDR_R); - } -} - -static int ids_nand_dev_ready(struct mtd_info *mtd) -{ - /* constant delay (see also tR in the datasheet) */ - udelay(12); - return 1; -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; - - /* Reference hardware control function */ - nand->cmd_ctrl = ids_nand_hwctrl; - nand->read_byte = ids_nand_read_byte; - nand->write_buf = ids_nand_write_buf; - nand->read_buf = ids_nand_read_buf; - nand->dev_ready = ids_nand_dev_ready; - nand->chip_delay = 12; - - return 0; -} - -#endif /* CONFIG_CMD_NAND */ - -#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup( blob, bd); -} -#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/configs/IDS8247_defconfig b/configs/IDS8247_defconfig deleted file mode 100644 index b4dd23fdba..0000000000 --- a/configs/IDS8247_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_IDS8247=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 848862c5e2..f9cceb740c 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +IDS8247 powerpc mpc8260 - - Heiko Schocher HWW1U1A powerpc mpc85xx - - Kyle Moffett hymod powerpc mpc8260 - - Murray Jensen MHPC powerpc mpc8xx - - Frank Gottschling diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h deleted file mode 100644 index 8ccb0ff9d8..0000000000 --- a/include/configs/IDS8247.h +++ /dev/null @@ -1,462 +0,0 @@ -/* - * (C) Copyright 2005 - * Heiko Schocher, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8272_FAMILY 1 -#define CONFIG_IDS8247 1 -#define CPU_ID_STR "MPC8247" -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BOOTCOUNT_LIMIT - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw " \ - "console=ttyS0,115200\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/IDS8247/uImage\0" \ - "kernel_addr=ff800000\0" \ - "ramdisk_addr=ffa00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_MISC_INIT_R 1 - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 400000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -/* - * Software (bit-bang) I2C driver configuration - */ - -#define I2C_PORT 0 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00000080) -#define I2C_TRISTATE (iop->pdir &= ~0x00000080) -#define I2C_READ ((iop->pdat & 0x00000080) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000080; \ - else iop->pdat &= ~0x00000080 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000100; \ - else iop->pdat &= ~0x00000100 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#if 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_I2C_X -#endif - -/* - * select serial console configuration - * use the extern UART for the console - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 14745600 - -#define CONFIG_SYS_UART_BASE 0xE0000000 -#define CONFIG_SYS_UART_SIZE 0x10000 - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0x8000) - - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000" - - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ -#define CONFIG_ETHER_ON_FCC1 -#define FCC_ENET - -/* - * - Rx-CLK is CLK10 - * - Tx-CLK is CLK9 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_BANKS_LIST { 0xFF800000 } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -/* What should the base address of the main FLASH be and how big is - * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk - * The main FLASH is whichever is connected to *CS0. - */ -#define CONFIG_SYS_FLASH0_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH0_SIZE 8 - -/* Flash bank size (for preliminary settings) - */ -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/* Environment in flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x60000) -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/*----------------------------------------------------------------------- - * NAND-FLASH stuff - *----------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NAND) - -#define CONFIG_SYS_NAND0_BASE 0xE1000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -#endif /* CONFIG_CMD_NAND */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000) - -/* no slaves so just fill with zeros */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * - * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ - -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI) -#define CONFIG_SYS_HID0_FINAL 0 -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR 0 - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BCR 0 - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR (0x00000028 | SCCR_DFBRG01) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 16 bit FLASH - * 1 60x GPCM 8 bit NAND - * 2 60x SDRAM 32 bit SDRAM - * 3 60x GPCM 8 bit UART - * - */ - -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ - -/* Minimum mask to separate preliminary - * address ranges for CS[0:2] - */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (32<<20) /* less than 32 MB */ - -#define CONFIG_SYS_MPTPR 0x6600 - -/*----------------------------------------------------------------------------- - * Address for Mode Register Set (MRS) command - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MRS_OFFS 0x00000110 - - -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_SCY_6_CLK ) - -#if defined(CONFIG_CMD_NAND) -/* Bank 1 - NAND Flash -*/ -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND0_BASE -#define CONFIG_SYS_NAND_SIZE 0x8000 - -#define CONFIG_SYS_OR_TIMING_NAND 0x000036 - -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V ) -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | CONFIG_SYS_OR_TIMING_NAND ) -#endif - -/* Bank 2 - 60x bus SDRAM - */ -#define CONFIG_SYS_PSRT 0x20 -#define CONFIG_SYS_LSRT 0x20 - -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2 - - -/* SDRAM initialization values -*/ -#define CONFIG_SYS_OR2 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A9 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A15_A17 |\ - PSDMR_SDA10_PBI0_A10 |\ - PSDMR_RFRC_5_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_2C |\ - PSDMR_WRC_3C |\ - PSDMR_CL_3) - -/* Bank 3 - UART -*/ - -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V ) -#define CONFIG_SYS_OR3_PRELIM (((-CONFIG_SYS_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX ) - -#endif /* __CONFIG_H */