From: Andrey Zhizhikin Date: Mon, 3 May 2021 07:59:17 +0000 (+0200) Subject: arm: imx: imx8mm: correct unrecognized fracpll frequency X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6ac4d4480663ca43f64a0ae1e49af5455bcff7aa;p=u-boot.git arm: imx: imx8mm: correct unrecognized fracpll frequency Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ() macro, which expands the value provided to the Hz range without taking into account the precise Hz setting. This causes the frequency of 266 MHz not ot be found in the imx8mm_fracpll_tbl, since it is entered there with a precise Hz value. This in turn causes the boot hang in SPL, as proper DDR fracpll frequency cannot be determined. Correct the value in imx8mm_fracpll_tbl to match the one expanded by MHZ(266) macro, rounding it down to MHz range only. Signed-off-by: Andrey Zhizhikin Cc: Stefano Babic Cc: Fabio Estevam Cc: "NXP i.MX U-Boot Team" Cc: Peng Fan Cc: Simon Glass Cc: Ye Li Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m") Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 6f45d74c6b..f8e4ec0d90 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -54,7 +54,7 @@ static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = { PLL_1443X_RATE(600000000U, 300, 3, 2, 0), PLL_1443X_RATE(594000000U, 99, 1, 2, 0), PLL_1443X_RATE(400000000U, 300, 9, 1, 0), - PLL_1443X_RATE(266666667U, 400, 9, 2, 0), + PLL_1443X_RATE(266000000U, 400, 9, 2, 0), PLL_1443X_RATE(167000000U, 334, 3, 4, 0), PLL_1443X_RATE(100000000U, 300, 9, 3, 0), };