From: Suman Anna Date: Mon, 17 Aug 2020 23:15:08 +0000 (-0500) Subject: remoteproc: k3-r5: Add support for J7200 R5Fs X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6aa3b740c3e04256d5e22dbae8bc5a802aa3b9b9;p=u-boot.git remoteproc: k3-r5: Add support for J7200 R5Fs The K3 J7200 SoC family has a revised R5F sub-system and contains a subset of the R5F clusters present on J721E SoCs. The integration of these clusters is very much similar to J721E SoCs otherwise. The revised IP has the following two new features: 1. TCMs are auto-initialized during module power-up, and the behavior is programmable through a MMR bit controlled by System Firmware. 2. The LockStep-mode allows the Core1 TCMs to be combined with the Core0 TCMs effectively doubling the amount of TCMs available. The LockStep-mode on previous SoCs could only use the Core0 TCMs. This combined TCMs appear contiguous at the respective Core0 TCM addresses. Add the support to these clusters in the K3 R5F remoteproc driver using J7200 specific compatibles and revised logic accounting for the above IP features/differences. Signed-off-by: Suman Anna --- diff --git a/drivers/remoteproc/ti_k3_r5f_rproc.c b/drivers/remoteproc/ti_k3_r5f_rproc.c index 1a7f1f8a00..8e21a38be7 100644 --- a/drivers/remoteproc/ti_k3_r5f_rproc.c +++ b/drivers/remoteproc/ti_k3_r5f_rproc.c @@ -2,8 +2,9 @@ /* * Texas Instruments' K3 R5 Remoteproc driver * - * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/ * Lokesh Vutla + * Suman Anna */ #include @@ -37,6 +38,8 @@ #define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000 #define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000 #define PROC_BOOT_CFG_FLAG_GEN_IGN_BOOTVECTOR 0x10000000 +/* Available from J7200 SoCs onwards */ +#define PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS 0x00004000 /* R5 TI-SCI Processor Control Flags */ #define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001 @@ -54,6 +57,16 @@ enum cluster_mode { CLUSTER_MODE_LOCKSTEP, }; +/** + * struct k3_r5f_ip_data - internal data structure used for IP variations + * @tcm_is_double: flag to denote the larger unified TCMs in certain modes + * @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC + */ +struct k3_r5f_ip_data { + bool tcm_is_double; + bool tcm_ecc_autoinit; +}; + /** * struct k3_r5_mem - internal memory structure * @cpu_addr: MPU virtual address of the memory region @@ -74,6 +87,7 @@ struct k3_r5f_mem { * @cluster: pointer to the parent cluster. * @reset: reset control handle * @tsp: TI-SCI processor control handle + * @ipdata: cached pointer to R5F IP specific feature data * @mem: Array of available internal memories * @num_mem: Number of available memories * @atcm_enable: flag to control ATCM enablement @@ -86,6 +100,7 @@ struct k3_r5f_core { struct k3_r5f_cluster *cluster; struct reset_ctl reset; struct ti_sci_proc tsp; + struct k3_r5f_ip_data *ipdata; struct k3_r5f_mem *mem; int num_mems; u32 atcm_enable; @@ -257,6 +272,18 @@ static int k3_r5f_core_sanity_check(struct k3_r5f_core *core) return 0; } +/* Zero out TCMs so that ECC can be effective on all TCM addresses */ +void k3_r5f_init_tcm_memories(struct k3_r5f_core *core, bool auto_inited) +{ + if (core->ipdata->tcm_ecc_autoinit && auto_inited) + return; + + if (core->atcm_enable) + memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size); + if (core->btcm_enable) + memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size); +} + /** * k3_r5f_load() - Load up the Remote processor image * @dev: rproc device pointer @@ -268,7 +295,9 @@ static int k3_r5f_core_sanity_check(struct k3_r5f_core *core) static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size) { struct k3_r5f_core *core = dev_get_priv(dev); - u32 boot_vector; + u64 boot_vector; + u32 ctrl, sts, cfg = 0; + bool mem_auto_init; int ret; dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size); @@ -281,6 +310,12 @@ static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size) if (ret) return ret; + ret = ti_sci_proc_get_status(&core->tsp, &boot_vector, &cfg, &ctrl, + &sts); + if (ret) + return ret; + mem_auto_init = !(cfg & PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS); + ret = k3_r5f_prepare(dev); if (ret) { dev_err(dev, "R5f prepare failed for core %d\n", @@ -288,11 +323,7 @@ static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size) goto proc_release; } - /* Zero out TCMs so that ECC can be effective on all TCM addresses */ - if (core->atcm_enable) - memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size); - if (core->btcm_enable) - memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size); + k3_r5f_init_tcm_memories(core, mem_auto_init); ret = rproc_elf_load_image(dev, addr, size); if (ret < 0) { @@ -302,7 +333,7 @@ static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size) boot_vector = rproc_elf_get_boot_addr(dev, addr); - dev_dbg(dev, "%s: Boot vector = 0x%x\n", __func__, boot_vector); + dev_dbg(dev, "%s: Boot vector = 0x%llx\n", __func__, boot_vector); ret = ti_sci_proc_set_config(&core->tsp, boot_vector, 0, 0); @@ -657,6 +688,8 @@ static int k3_r5f_of_to_priv(struct k3_r5f_core *core) return ret; } + core->ipdata = (struct k3_r5f_ip_data *)dev_get_driver_data(core->dev); + return 0; } @@ -702,6 +735,38 @@ static int k3_r5f_core_of_get_memories(struct k3_r5f_core *core) return 0; } +/* + * Each R5F core within a typical R5FSS instance has a total of 64 KB of TCMs, + * split equally into two 32 KB banks between ATCM and BTCM. The TCMs from both + * cores are usable in Split-mode, but only the Core0 TCMs can be used in + * LockStep-mode. The newer revisions of the R5FSS IP maximizes these TCMs by + * leveraging the Core1 TCMs as well in certain modes where they would have + * otherwise been unusable (Eg: LockStep-mode on J7200 SoCs). This is done by + * making a Core1 TCM visible immediately after the corresponding Core0 TCM. + * The SoC memory map uses the larger 64 KB sizes for the Core0 TCMs, and the + * dts representation reflects this increased size on supported SoCs. The Core0 + * TCM sizes therefore have to be adjusted to only half the original size in + * Split mode. + */ +static void k3_r5f_core_adjust_tcm_sizes(struct k3_r5f_core *core) +{ + struct k3_r5f_cluster *cluster = core->cluster; + + if (cluster->mode == CLUSTER_MODE_LOCKSTEP) + return; + + if (!core->ipdata->tcm_is_double) + return; + + if (core == cluster->cores[0]) { + core->mem[0].size /= 2; + core->mem[1].size /= 2; + + dev_dbg(core->dev, "adjusted TCM sizes, ATCM = 0x%zx BTCM = 0x%zx\n", + core->mem[0].size, core->mem[1].size); + } +} + /** * k3_r5f_probe() - Basic probe * @dev: corresponding k3 remote processor device @@ -755,6 +820,8 @@ static int k3_r5f_probe(struct udevice *dev) return ret; } + k3_r5f_core_adjust_tcm_sizes(core); + dev_dbg(dev, "Remoteproc successfully probed\n"); return 0; @@ -771,9 +838,20 @@ static int k3_r5f_remove(struct udevice *dev) return 0; } +static const struct k3_r5f_ip_data k3_data = { + .tcm_is_double = false, + .tcm_ecc_autoinit = false, +}; + +static const struct k3_r5f_ip_data j7200_data = { + .tcm_is_double = true, + .tcm_ecc_autoinit = true, +}; + static const struct udevice_id k3_r5f_rproc_ids[] = { - { .compatible = "ti,am654-r5f"}, - { .compatible = "ti,j721e-r5f"}, + { .compatible = "ti,am654-r5f", .data = (ulong)&k3_data, }, + { .compatible = "ti,j721e-r5f", .data = (ulong)&k3_data, }, + { .compatible = "ti,j7200-r5f", .data = (ulong)&j7200_data, }, {} }; @@ -810,6 +888,7 @@ static int k3_r5f_cluster_probe(struct udevice *dev) static const struct udevice_id k3_r5fss_ids[] = { { .compatible = "ti,am654-r5fss"}, { .compatible = "ti,j721e-r5fss"}, + { .compatible = "ti,j7200-r5fss"}, {} };