From: Tom Rini Date: Thu, 19 Aug 2021 03:12:34 +0000 (-0400) Subject: rcar: i2c: Migrate SYS_I2C_SH to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6aa075432e4251782ae31f9336c8382b98a17153;p=u-boot.git rcar: i2c: Migrate SYS_I2C_SH to Kconfig - Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut Signed-off-by: Tom Rini --- diff --git a/README b/README index d59d3be073..c75ac0c904 100644 --- a/README +++ b/README @@ -1484,26 +1484,6 @@ The following options need to be configured: - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0 - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1 - - drivers/i2c/rcar_i2c.c: - - activate this driver with CONFIG_SYS_I2C_RCAR - - This driver adds 4 i2c buses - - - drivers/i2c/sh_i2c.c: - - activate this driver with CONFIG_SYS_I2C_SH - - This driver adds from 2 to 5 i2c buses - - - CONFIG_SYS_I2C_SH_BASE0 for setting the register channel 0 - - CONFIG_SYS_I2C_SH_SPEED0 for for the speed channel 0 - - CONFIG_SYS_I2C_SH_BASE1 for setting the register channel 1 - - CONFIG_SYS_I2C_SH_SPEED1 for for the speed channel 1 - - CONFIG_SYS_I2C_SH_BASE2 for setting the register channel 2 - - CONFIG_SYS_I2C_SH_SPEED2 for for the speed channel 2 - - CONFIG_SYS_I2C_SH_BASE3 for setting the register channel 3 - - CONFIG_SYS_I2C_SH_SPEED3 for for the speed channel 3 - - CONFIG_SYS_I2C_SH_BASE4 for setting the register channel 4 - - CONFIG_SYS_I2C_SH_SPEED4 for for the speed channel 4 - - CONFIG_SYS_I2C_SH_NUM_CONTROLLERS for number of i2c buses - - drivers/i2c/s3c24x0_i2c.c: - activate this driver with CONFIG_SYS_I2C_S3C24X0 - This driver adds i2c buses (11 for Exynos5250, Exynos5420 diff --git a/arch/arm/mach-rmobile/include/mach/r8a7790.h b/arch/arm/mach-rmobile/include/mach/r8a7790.h index f3fbf77b0a..ef74d59fed 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7790.h @@ -10,10 +10,6 @@ #include "rcar-base.h" -/* SH-I2C */ -#define CONFIG_SYS_I2C_SH_BASE2 0xE6520000 -#define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000 - /* Module stop control/status register bits */ #define MSTP0_BITS 0x00640801 #define MSTP1_BITS 0xDB6E9BDF diff --git a/arch/arm/mach-rmobile/include/mach/r8a7791.h b/arch/arm/mach-rmobile/include/mach/r8a7791.h index fec9f7bf5d..681d1ea524 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7791.h @@ -13,9 +13,6 @@ * R-Car (R8A7791) I/O Addresses */ -/* SH-I2C */ -#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 - /* SDHI */ #define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000 #define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000 diff --git a/arch/arm/mach-rmobile/include/mach/r8a7792.h b/arch/arm/mach-rmobile/include/mach/r8a7792.h index 8acd7ba750..06db64af6c 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7792.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7792.h @@ -10,10 +10,6 @@ #include "rcar-base.h" -/* SH-I2C */ -#define CONFIG_SYS_I2C_SH_BASE2 0xE6520000 -#define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000 - /* Module stop control/status register bits */ #define MSTP0_BITS 0x00400801 #define MSTP1_BITS 0x9B6F987F diff --git a/arch/arm/mach-rmobile/include/mach/r8a7793.h b/arch/arm/mach-rmobile/include/mach/r8a7793.h index 278c7768d9..31433c3693 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7793.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7793.h @@ -14,9 +14,6 @@ * R8A7793 I/O Addresses */ -/* SH-I2C */ -#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 - /* SDHI */ #define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000 #define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000 diff --git a/arch/arm/mach-rmobile/include/mach/r8a7794.h b/arch/arm/mach-rmobile/include/mach/r8a7794.h index 73259c7ec1..3baa4237c2 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7794.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7794.h @@ -10,9 +10,6 @@ #include "rcar-base.h" -/* SH-I2C */ -#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 - /* Module stop control/status register bits */ #define MSTP0_BITS 0x00440801 #define MSTP1_BITS 0x936899DA diff --git a/arch/arm/mach-rmobile/include/mach/rcar-base.h b/arch/arm/mach-rmobile/include/mach/rcar-base.h index a20740679f..4c98dffa07 100644 --- a/arch/arm/mach-rmobile/include/mach/rcar-base.h +++ b/arch/arm/mach-rmobile/include/mach/rcar-base.h @@ -70,14 +70,6 @@ #define SMSTPCR10 0xE6150998 #define SMSTPCR11 0xE615099C -/* - * SH-I2C - * Ch2 and ch3 are different address. These are defined - * in the header of each SoCs. - */ -#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000 -#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000 - /* RCAR-I2C */ #define CONFIG_SYS_RCAR_I2C0_BASE 0xE6508000 #define CONFIG_SYS_RCAR_I2C1_BASE 0xE6518000 diff --git a/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h b/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h index 5cd8a8c787..ca1274272d 100644 --- a/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h +++ b/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h @@ -74,9 +74,6 @@ #define PUEN_USB1_OVC (1 << 2) #define PUEN_USB1_PWEN (1 << 1) -/* IICDVFS (I2C) */ -#define CONFIG_SYS_I2C_SH_BASE0 0xE60B0000 - #ifndef __ASSEMBLY__ #include #include diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index 41cd963b2f..8e0f6af24d 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -25,6 +25,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x40000 CONFIG_VERSION_VARIABLE=y CONFIG_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_SH=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index d1f4d8c7c5..158420c403 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -449,6 +449,54 @@ config SYS_I2C_SANDBOX bus. Devices can be attached to the bus using the device tree which specifies the driver to use. See sandbox.dts as an example. +config SYS_I2C_SH + bool "Legacy SuperH I2C interface" + depends on ARCH_RMOBILE && SYS_I2C_LEGACY + help + Enable the legacy SuperH I2C interface. + +if SYS_I2C_SH +config SYS_I2C_SH_NUM_CONTROLLERS + int + default 5 + +config SYS_I2C_SH_BASE0 + hex + default 0xE6820000 + +config SYS_I2C_SH_BASE1 + hex + default 0xE6822000 + +config SYS_I2C_SH_BASE2 + hex + default 0xE6824000 + +config SYS_I2C_SH_BASE3 + hex + default 0xE6826000 + +config SYS_I2C_SH_BASE4 + hex + default 0xE6828000 + +config SH_I2C_8BIT + bool + default y + +config SH_I2C_DATA_HIGH + int + default 4 + +config SH_I2C_DATA_LOW + int + default 5 + +config SH_I2C_CLOCK + int + default 104000000 +endif + config SYS_I2C_SOFT bool "Legacy software I2C interface" help diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 26a8700669..6cecec4145 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -294,20 +294,20 @@ static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap, * Register RCAR i2c adapters */ U_BOOT_I2C_ADAP_COMPLETE(sh_0, sh_i2c_init, sh_i2c_probe, sh_i2c_read, - sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED0, 0, 0) + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 0) #ifdef CONFIG_SYS_I2C_SH_BASE1 U_BOOT_I2C_ADAP_COMPLETE(sh_1, sh_i2c_init, sh_i2c_probe, sh_i2c_read, - sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED1, 0, 1) + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 1) #endif #ifdef CONFIG_SYS_I2C_SH_BASE2 U_BOOT_I2C_ADAP_COMPLETE(sh_2, sh_i2c_init, sh_i2c_probe, sh_i2c_read, - sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED2, 0, 2) + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 2) #endif #ifdef CONFIG_SYS_I2C_SH_BASE3 U_BOOT_I2C_ADAP_COMPLETE(sh_3, sh_i2c_init, sh_i2c_probe, sh_i2c_read, - sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED3, 0, 3) + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 3) #endif #ifdef CONFIG_SYS_I2C_SH_BASE4 U_BOOT_I2C_ADAP_COMPLETE(sh_4, sh_i2c_init, sh_i2c_probe, sh_i2c_read, - sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED4, 0, 4) + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 4) #endif diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index af743ce4a0..6bade5e440 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -82,22 +82,4 @@ #define CONFIG_NFS_TIMEOUT 10000UL -/* I2C */ -#define CONFIG_SYS_I2C_SH -#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 5 -#define CONFIG_SYS_I2C_SH_BASE0 0xE6820000 -#define CONFIG_SYS_I2C_SH_SPEED0 100000 -#define CONFIG_SYS_I2C_SH_BASE1 0xE6822000 -#define CONFIG_SYS_I2C_SH_SPEED1 100000 -#define CONFIG_SYS_I2C_SH_BASE2 0xE6824000 -#define CONFIG_SYS_I2C_SH_SPEED2 100000 -#define CONFIG_SYS_I2C_SH_BASE3 0xE6826000 -#define CONFIG_SYS_I2C_SH_SPEED3 100000 -#define CONFIG_SYS_I2C_SH_BASE4 0xE6828000 -#define CONFIG_SYS_I2C_SH_SPEED4 100000 -#define CONFIG_SH_I2C_8BIT -#define CONFIG_SH_I2C_DATA_HIGH 4 -#define CONFIG_SH_I2C_DATA_LOW 5 -#define CONFIG_SH_I2C_CLOCK 104000000 /* 104 MHz */ - #endif /* __KZM9G_H */