From: Jagan Teki <jagan@amarulasolutions.com>
Date: Fri, 20 Jul 2018 07:04:22 +0000 (+0530)
Subject: phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=69aa1b234e14503a95f43e33f0b3d4174f350bd2;p=u-boot.git

phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5

Only H3 and H5 have 4 PHYS so restrict rst_mask only for them
by checking PHY id as 3 and update the proper bits.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
---

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 3096f12c1c..a7d7e3f044 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -117,9 +117,6 @@ struct sun4i_usb_phy_info {
 		.gpio_vbus = CONFIG_USB3_VBUS_PIN,
 		.gpio_vbus_det = NULL,
 		.gpio_id_det = NULL,
-#ifdef CONFIG_MACH_SUN6I
-		.rst_mask = (CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK),
-#endif
 	},
 };
 
@@ -460,6 +457,8 @@ static int sun4i_usb_phy_probe(struct udevice *dev)
 
 		phy->id = i;
 		phy->rst_mask = info->rst_mask;
+		if ((data->cfg->type == sun8i_h3_phy) && (phy->id == 3))
+			phy->rst_mask = (BIT(3) | BIT(11));
 	};
 
 	debug("Allwinner Sun4I USB PHY driver loaded\n");