From: Hans de Goede Date: Sat, 3 Oct 2015 13:18:33 +0000 (+0200) Subject: sunxi: power: Unify axp pmic function names X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6944aff1ca91e8cf2c373193982cbb0417b4d4cc;p=u-boot.git sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index a276fad316..05fef3216d 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #ifdef CONFIG_MACH_SUN6I @@ -82,7 +82,7 @@ int print_cpuinfo(void) int sunxi_get_sid(unsigned int *sid) { #ifdef CONFIG_AXP221_POWER - return axp221_get_sid(sid); + return axp_get_sid(sid); #elif defined SUNXI_SID_BASE int i; diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c index b7ca5d423a..19bb5a1fe5 100644 --- a/arch/arm/cpu/armv7/sunxi/usb_phy.c +++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c @@ -17,15 +17,6 @@ #include #include #include -#ifdef CONFIG_AXP152_POWER -#include -#endif -#ifdef CONFIG_AXP209_POWER -#include -#endif -#ifdef CONFIG_AXP221_POWER -#include -#endif #define SUNXI_USB_PMU_IRQ_ENABLE 0x800 #ifdef CONFIG_MACH_SUN8I_A33 diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 55a880ebb7..6ac398c2dc 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -13,15 +13,7 @@ #include #include -#ifdef CONFIG_AXP152_POWER -#include -#endif -#ifdef CONFIG_AXP209_POWER -#include -#endif -#ifdef CONFIG_AXP221_POWER -#include -#endif +#include #include #include #include @@ -438,40 +430,42 @@ void sunxi_board_init(void) int power_failed = 0; unsigned long ramsize; -#ifdef CONFIG_AXP152_POWER - power_failed = axp152_init(); - power_failed |= axp152_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); - power_failed |= axp152_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); - power_failed |= axp152_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); - power_failed |= axp152_set_ldo2(CONFIG_AXP_ALDO2_VOLT); +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER + power_failed = axp_init(); + +#ifdef CONFIG_AXP221_POWER + power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT); #endif -#ifdef CONFIG_AXP209_POWER - power_failed |= axp209_init(); - power_failed |= axp209_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); - power_failed |= axp209_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); - power_failed |= axp209_set_ldo2(CONFIG_AXP_ALDO2_VOLT); - power_failed |= axp209_set_ldo3(CONFIG_AXP_ALDO3_VOLT); - power_failed |= axp209_set_ldo4(CONFIG_AXP_ALDO4_VOLT); + power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); + power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); +#ifndef CONFIG_AXP209_POWER + power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); #endif #ifdef CONFIG_AXP221_POWER - power_failed = axp221_init(); - power_failed |= axp221_set_dcdc1(CONFIG_AXP_DCDC1_VOLT); - power_failed |= axp221_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); - power_failed |= axp221_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); - power_failed |= axp221_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); - power_failed |= axp221_set_dcdc5(CONFIG_AXP_DCDC5_VOLT); - power_failed |= axp221_set_aldo1(CONFIG_AXP_ALDO1_VOLT); - power_failed |= axp221_set_aldo2(CONFIG_AXP_ALDO2_VOLT); - power_failed |= axp221_set_aldo3(CONFIG_AXP_ALDO3_VOLT); - power_failed |= axp221_set_dldo1(CONFIG_AXP_DLDO1_VOLT); - power_failed |= axp221_set_dldo2(CONFIG_AXP_DLDO2_VOLT); - power_failed |= axp221_set_dldo3(CONFIG_AXP_DLDO3_VOLT); - power_failed |= axp221_set_dldo4(CONFIG_AXP_DLDO4_VOLT); - power_failed |= axp221_set_eldo(1, CONFIG_AXP_ELDO1_VOLT); - power_failed |= axp221_set_eldo(2, CONFIG_AXP_ELDO2_VOLT); - power_failed |= axp221_set_eldo(3, CONFIG_AXP_ELDO3_VOLT); + power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT); #endif +#ifdef CONFIG_AXP221_POWER + power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT); +#endif + power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT); +#ifndef CONFIG_AXP152_POWER + power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT); +#endif +#ifdef CONFIG_AXP209_POWER + power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT); +#endif + +#ifdef CONFIG_AXP221_POWER + power_failed |= axp_set_dldo1(CONFIG_AXP_DLDO1_VOLT); + power_failed |= axp_set_dldo2(CONFIG_AXP_DLDO2_VOLT); + power_failed |= axp_set_dldo3(CONFIG_AXP_DLDO3_VOLT); + power_failed |= axp_set_dldo4(CONFIG_AXP_DLDO4_VOLT); + power_failed |= axp_set_eldo(1, CONFIG_AXP_ELDO1_VOLT); + power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT); + power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT); +#endif +#endif printf("DRAM:"); ramsize = sunxi_dram_init(); printf(" %lu MiB\n", ramsize >> 20); diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c index 2e97cc39d6..bd2ac892d0 100644 --- a/drivers/gpio/axp_gpio.c +++ b/drivers/gpio/axp_gpio.c @@ -10,22 +10,13 @@ #include #include #include +#include #include #include #include #include #include -#ifdef CONFIG_AXP152_POWER -#include -#elif defined CONFIG_AXP209_POWER -#include -#elif defined CONFIG_AXP221_POWER -#include -#else -#error Unknown AXP model -#endif - static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val); static u8 axp_get_gpio_ctrl_reg(unsigned pin) diff --git a/drivers/power/axp152.c b/drivers/power/axp152.c index 740a3b41cd..c60e4d3efb 100644 --- a/drivers/power/axp152.c +++ b/drivers/power/axp152.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include static int axp152_write(enum axp152_reg reg, u8 val) { @@ -28,7 +28,7 @@ static u8 axp152_mvolt_to_target(int mvolt, int min, int max, int div) return (mvolt - min) / div; } -int axp152_set_dcdc2(int mvolt) +int axp_set_dcdc2(unsigned int mvolt) { int rc; u8 current, target; @@ -49,28 +49,28 @@ int axp152_set_dcdc2(int mvolt) return rc; } -int axp152_set_dcdc3(int mvolt) +int axp_set_dcdc3(unsigned int mvolt) { u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 50); return axp152_write(AXP152_DCDC3_VOLTAGE, target); } -int axp152_set_dcdc4(int mvolt) +int axp_set_dcdc4(unsigned int mvolt) { u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 25); return axp152_write(AXP152_DCDC4_VOLTAGE, target); } -int axp152_set_ldo2(int mvolt) +int axp_set_aldo2(unsigned int mvolt) { u8 target = axp152_mvolt_to_target(mvolt, 700, 3500, 100); return axp152_write(AXP152_LDO2_VOLTAGE, target); } -int axp152_init(void) +int axp_init(void) { u8 ver; int rc; diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c index 5161bc1472..91c35faf6e 100644 --- a/drivers/power/axp209.c +++ b/drivers/power/axp209.c @@ -7,8 +7,7 @@ #include #include -#include -#include +#include static int axp209_write(enum axp209_reg reg, u8 val) { @@ -30,7 +29,7 @@ static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div) return (mvolt - min) / div; } -int axp209_set_dcdc2(int mvolt) +int axp_set_dcdc2(unsigned int mvolt) { int rc; u8 cfg, current; @@ -53,14 +52,14 @@ int axp209_set_dcdc2(int mvolt) return rc; } -int axp209_set_dcdc3(int mvolt) +int axp_set_dcdc3(unsigned int mvolt) { u8 cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25); return axp209_write(AXP209_DCDC3_VOLTAGE, cfg); } -int axp209_set_ldo2(int mvolt) +int axp_set_aldo2(unsigned int mvolt) { int rc; u8 cfg, reg; @@ -76,7 +75,7 @@ int axp209_set_ldo2(int mvolt) return axp209_write(AXP209_LDO24_VOLTAGE, reg); } -int axp209_set_ldo3(int mvolt) +int axp_set_aldo3(unsigned int mvolt) { u8 cfg; @@ -88,10 +87,10 @@ int axp209_set_ldo3(int mvolt) return axp209_write(AXP209_LDO3_VOLTAGE, cfg); } -int axp209_set_ldo4(int mvolt) +int axp_set_aldo4(unsigned int mvolt) { int rc; - static const int vindex[] = { + static const unsigned int vindex[] = { 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500, 2700, 2800, 3000, 3100, 3200, 3300 }; @@ -109,7 +108,7 @@ int axp209_set_ldo4(int mvolt) return axp209_write(AXP209_LDO24_VOLTAGE, reg); } -int axp209_init(void) +int axp_init(void) { u8 ver; int i, rc; @@ -133,25 +132,3 @@ int axp209_init(void) return 0; } - -int axp209_poweron_by_dc(void) -{ - u8 v; - - if (axp209_read(AXP209_POWER_STATUS, &v)) - return 0; - - return (v & AXP209_POWER_STATUS_ON_BY_DC); -} - -int axp209_power_button(void) -{ - u8 v; - - if (axp209_read(AXP209_IRQ_STATUS5, &v)) - return 0; - - axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN); - - return v & AXP209_IRQ5_PEK_DOWN; -} diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index 7bbaec87e4..d621f2a9f9 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -12,9 +12,8 @@ #include #include -#include #include -#include +#include static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div) { @@ -26,7 +25,7 @@ static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div) return (mvolt - min) / div; } -int axp221_set_dcdc1(unsigned int mvolt) +int axp_set_dcdc1(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100); @@ -48,7 +47,7 @@ int axp221_set_dcdc1(unsigned int mvolt) AXP221_OUTPUT_CTRL1_DCDC1_EN); } -int axp221_set_dcdc2(unsigned int mvolt) +int axp_set_dcdc2(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); @@ -65,7 +64,7 @@ int axp221_set_dcdc2(unsigned int mvolt) AXP221_OUTPUT_CTRL1_DCDC2_EN); } -int axp221_set_dcdc3(unsigned int mvolt) +int axp_set_dcdc3(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20); @@ -82,7 +81,7 @@ int axp221_set_dcdc3(unsigned int mvolt) AXP221_OUTPUT_CTRL1_DCDC3_EN); } -int axp221_set_dcdc4(unsigned int mvolt) +int axp_set_dcdc4(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); @@ -99,7 +98,7 @@ int axp221_set_dcdc4(unsigned int mvolt) AXP221_OUTPUT_CTRL1_DCDC4_EN); } -int axp221_set_dcdc5(unsigned int mvolt) +int axp_set_dcdc5(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50); @@ -116,7 +115,7 @@ int axp221_set_dcdc5(unsigned int mvolt) AXP221_OUTPUT_CTRL1_DCDC5_EN); } -int axp221_set_dldo1(unsigned int mvolt) +int axp_set_dldo1(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -133,7 +132,7 @@ int axp221_set_dldo1(unsigned int mvolt) AXP221_OUTPUT_CTRL2_DLDO1_EN); } -int axp221_set_dldo2(unsigned int mvolt) +int axp_set_dldo2(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -150,7 +149,7 @@ int axp221_set_dldo2(unsigned int mvolt) AXP221_OUTPUT_CTRL2_DLDO2_EN); } -int axp221_set_dldo3(unsigned int mvolt) +int axp_set_dldo3(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -167,7 +166,7 @@ int axp221_set_dldo3(unsigned int mvolt) AXP221_OUTPUT_CTRL2_DLDO3_EN); } -int axp221_set_dldo4(unsigned int mvolt) +int axp_set_dldo4(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -184,7 +183,7 @@ int axp221_set_dldo4(unsigned int mvolt) AXP221_OUTPUT_CTRL2_DLDO4_EN); } -int axp221_set_aldo1(unsigned int mvolt) +int axp_set_aldo1(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -201,7 +200,7 @@ int axp221_set_aldo1(unsigned int mvolt) AXP221_OUTPUT_CTRL1_ALDO1_EN); } -int axp221_set_aldo2(unsigned int mvolt) +int axp_set_aldo2(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -218,7 +217,7 @@ int axp221_set_aldo2(unsigned int mvolt) AXP221_OUTPUT_CTRL1_ALDO2_EN); } -int axp221_set_aldo3(unsigned int mvolt) +int axp_set_aldo3(unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -235,7 +234,7 @@ int axp221_set_aldo3(unsigned int mvolt) AXP221_OUTPUT_CTRL3_ALDO3_EN); } -int axp221_set_eldo(int eldo_num, unsigned int mvolt) +int axp_set_eldo(int eldo_num, unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); @@ -268,7 +267,7 @@ int axp221_set_eldo(int eldo_num, unsigned int mvolt) return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, bits); } -int axp221_init(void) +int axp_init(void) { /* This cannot be 0 because it is used in SPL before BSS is ready */ static int needs_init = 1; @@ -293,12 +292,12 @@ int axp221_init(void) return 0; } -int axp221_get_sid(unsigned int *sid) +int axp_get_sid(unsigned int *sid) { u8 *dest = (u8 *)sid; int i, ret; - ret = axp221_init(); + ret = pmic_bus_init(); if (ret) return ret; diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c index fc1aea3f06..9fee66a2a4 100644 --- a/drivers/video/sunxi_display.c +++ b/drivers/video/sunxi_display.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include @@ -1217,10 +1217,10 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode, if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) { /* * The anx9804 needs 1.8V from eldo3, we do this here - * and not via CONFIG_AXP221_ELDO3 from board_init() + * and not via CONFIG_AXP_ELDO3_VOLT from board_init() * to avoid turning this on when using hdmi output. */ - axp221_set_eldo(3, 1800); + axp_set_eldo(3, 1800); anx9804_init(CONFIG_VIDEO_LCD_I2C_BUS, 4, ANX9804_DATA_RATE_1620M, sunxi_display.depth); diff --git a/include/axp152.h b/include/axp152.h index c3aef77210..1643266f9a 100644 --- a/include/axp152.h +++ b/include/axp152.h @@ -25,9 +25,3 @@ enum axp152_reg { #define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x97 #define AXP_GPIO_STATE_OFFSET 0 - -int axp152_set_dcdc2(int mvolt); -int axp152_set_dcdc3(int mvolt); -int axp152_set_dcdc4(int mvolt); -int axp152_set_ldo2(int mvolt); -int axp152_init(void); diff --git a/include/axp209.h b/include/axp209.h index 6170202b4c..13aa66c7bc 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -39,12 +39,3 @@ enum axp209_reg { #define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x94 #define AXP_GPIO_STATE_OFFSET 4 - -extern int axp209_set_dcdc2(int mvolt); -extern int axp209_set_dcdc3(int mvolt); -extern int axp209_set_ldo2(int mvolt); -extern int axp209_set_ldo3(int mvolt); -extern int axp209_set_ldo4(int mvolt); -extern int axp209_init(void); -extern int axp209_poweron_by_dc(void); -extern int axp209_power_button(void); diff --git a/include/axp221.h b/include/axp221.h index 9c871623a8..0ee21b6280 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -62,19 +62,3 @@ #define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x94 #define AXP_GPIO_STATE_OFFSET 0 - -int axp221_set_dcdc1(unsigned int mvolt); -int axp221_set_dcdc2(unsigned int mvolt); -int axp221_set_dcdc3(unsigned int mvolt); -int axp221_set_dcdc4(unsigned int mvolt); -int axp221_set_dcdc5(unsigned int mvolt); -int axp221_set_dldo1(unsigned int mvolt); -int axp221_set_dldo2(unsigned int mvolt); -int axp221_set_dldo3(unsigned int mvolt); -int axp221_set_dldo4(unsigned int mvolt); -int axp221_set_aldo1(unsigned int mvolt); -int axp221_set_aldo2(unsigned int mvolt); -int axp221_set_aldo3(unsigned int mvolt); -int axp221_set_eldo(int eldo_num, unsigned int mvolt); -int axp221_init(void); -int axp221_get_sid(unsigned int *sid); diff --git a/include/axp_pmic.h b/include/axp_pmic.h new file mode 100644 index 0000000000..ef339c4785 --- /dev/null +++ b/include/axp_pmic.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2015 Hans de Goede + * + * X-Powers AX Power Management IC support header + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _AXP_PMIC_H_ + +#ifdef CONFIG_AXP152_POWER +#include +#endif +#ifdef CONFIG_AXP209_POWER +#include +#endif +#ifdef CONFIG_AXP221_POWER +#include +#endif + +int axp_set_dcdc1(unsigned int mvolt); +int axp_set_dcdc2(unsigned int mvolt); +int axp_set_dcdc3(unsigned int mvolt); +int axp_set_dcdc4(unsigned int mvolt); +int axp_set_dcdc5(unsigned int mvolt); +int axp_set_aldo1(unsigned int mvolt); +int axp_set_aldo2(unsigned int mvolt); +int axp_set_aldo3(unsigned int mvolt); +int axp_set_aldo4(unsigned int mvolt); +int axp_set_dldo1(unsigned int mvolt); +int axp_set_dldo2(unsigned int mvolt); +int axp_set_dldo3(unsigned int mvolt); +int axp_set_dldo4(unsigned int mvolt); +int axp_set_eldo(int eldo_num, unsigned int mvolt); +int axp_init(void); +int axp_get_sid(unsigned int *sid); + +#endif