From: Fabio Estevam Date: Tue, 14 Jul 2015 01:01:52 +0000 (-0300) Subject: thermal: Fix comments X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6918f974cf48b31c63f3e975302e8178575aa832;p=u-boot.git thermal: Fix comments It seems that many comments were copied from the I2C uclass, so adjust the comments for the thermal class. Reported-by: Simon Glass Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador Acked-by: Simon Glass --- diff --git a/include/thermal.h b/include/thermal.h index 5d6101bec6..b197c0aaa7 100644 --- a/include/thermal.h +++ b/include/thermal.h @@ -13,7 +13,7 @@ int thermal_get_temp(struct udevice *dev, int *temp); /** - * struct struct dm_thermal_ops - Driver model Thermal operations + * struct dm_thermal_ops - Driver model Thermal operations * * The uclass interface is implemented by all Thermal devices which use * driver model. @@ -22,19 +22,11 @@ struct dm_thermal_ops { /** * Get the current temperature * - * The device provided is the slave device. It's parent controller - * will be used to provide the communication. - * - * This must be called before doing any transfers with a Thermal slave. - * It will enable and initialize any Thermal hardware as necessary, - * and make sure that the SCK line is in the correct idle state. It is - * not allowed to claim the same bus for several slaves without - * releasing the bus in between. + * This must be called before doing any transfers with a Thermal device. + * It will enable and initialize any Thermal hardware as necessary. * * @dev: The Thermal device - * - * Returns: 0 if the bus was claimed successfully, or a negative value - * if it wasn't. + * @temp: pointer that returns the measured temperature */ int (*get_temp)(struct udevice *dev, int *temp); };