From: Eric Nelson Date: Thu, 29 Aug 2013 19:37:36 +0000 (-0700) Subject: i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisor X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=67d54c39178aef2ea691c09dc115ed44ea92f46e;p=u-boot.git i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisor This clock isn't feeding anything under U-Boot, so there's no point in changing it from power-on default. Signed-off-by: Eric Nelson --- diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 1419f36b8e..f664f6de6b 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,7 +622,6 @@ int board_video_skip(void) static void setup_display(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; int reg; @@ -633,10 +632,6 @@ static void setup_display(void) reg |= MXC_CCM_CCGR3_LDB_DI0_MASK; writel(reg, &mxc_ccm->CCGR3); - /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ - writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); - writel(0x13<pfd_480_set); - /* set LDB0, LDB1 clk select to 011/011 */ reg = readl(&mxc_ccm->cs2cdr); reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK