From: Patrice Chotard Date: Fri, 3 Aug 2018 09:46:21 +0000 (+0200) Subject: configs: stm32f429-evaluation: Add DISTRO_DEFAULT support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=673c624cab2471daadb7f197c98959a2398dbe98;p=u-boot.git configs: stm32f429-evaluation: Add DISTRO_DEFAULT support Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard --- diff --git a/configs/stm32f429-evaluation_defconfig b/configs/stm32f429-evaluation_defconfig index 3ddd5c50fb..c010bf4a13 100644 --- a/configs/stm32f429-evaluation_defconfig +++ b/configs/stm32f429-evaluation_defconfig @@ -5,25 +5,22 @@ CONFIG_SYS_MALLOC_F_LEN=0xF00 CONFIG_STM32F4=y CONFIG_TARGET_STM32F429_EVALUATION=y CONFIG_DEFAULT_DEVICE_TREE="stm32429i-eval" -CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 +# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set CONFIG_CMD_IMLS=y CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MII is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y +# CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM_MMC=y diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index ab730e1a47..b0dcddc6d5 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -40,11 +40,20 @@ #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) -#define CONFIG_BOOTCOMMAND \ - "run boot_sd" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "boot_sd=mmc dev 0;fatload mmc 0 0x00700000 stm32429i-eval.dtb; fatload mmc 0 0x00008000 zImage; bootz 0x00008000 - 0x00700000" +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) + +#include +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr_r=0x00008000\0" \ + "fdtfile=stm32429i-eval.dtb\0" \ + "fdt_addr_r=0x00700000\0" \ + "scriptaddr=0x00800000\0" \ + "pxefile_addr_r=0x00800000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "ramdisk_addr_r=0x00900000\0" \ + BOOTENV /* * Command line configuration.