From: Jonas Karlman Date: Mon, 17 Apr 2023 19:07:20 +0000 (+0000) Subject: rockchip: rk3588: Add support for sdmmc clocks in SPL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6737771600d4fd8eb48663ea8da37f3f4f49aad5;p=u-boot.git rockchip: rk3588: Add support for sdmmc clocks in SPL Booting from sdmmc on RK3588 currently works because of a workaround in the device tree, clocks are reordered so that the driver use ciu-sample instead of ciu, and the BootRom initializes sdmmc clocks before SPL is loaded into DRAM. The sdmmc clocks are normally controlled by TF-A using SCMI. However, there is a need to control these clocks in SPL, before TF-A has started. This adds a rk3588_scru driver to control the sdmmc clocks in SPL before TF-A has started, using scru regs. It also adds a small glue driver to bind the scmi clock node to the rk3588_scru driver in SPL. Fixes: 7a474df74023 ("clk: rockchip: Add rk3588 clk support") Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/include/asm/arch-rockchip/clock.h b/arch/arm/include/asm/arch-rockchip/clock.h index 90e66c7da0..f002ebcb7a 100644 --- a/arch/arm/include/asm/arch-rockchip/clock.h +++ b/arch/arm/include/asm/arch-rockchip/clock.h @@ -194,6 +194,5 @@ int rockchip_get_clk(struct udevice **devp); * Return: 0 success, or error value */ int rockchip_reset_bind(struct udevice *pdev, u32 reg_offset, u32 reg_number); -int rockchip_get_scmi_clk(struct udevice **devp); #endif diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3588.h b/arch/arm/include/asm/arch-rockchip/cru_rk3588.h index 3ea59e9008..7f4a908539 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3588.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3588.h @@ -11,12 +11,12 @@ #define KHz 1000 #define OSC_HZ (24 * MHz) -#define CPU_PVTPLL_HZ (1008 * MHz) #define LPLL_HZ (816 * MHz) #define GPLL_HZ (1188 * MHz) #define CPLL_HZ (1500 * MHz) #define NPLL_HZ (850 * MHz) #define PPLL_HZ (1100 * MHz) +#define SPLL_HZ (702 * MHz) /* RK3588 pll id */ enum rk3588_pll_id { @@ -447,5 +447,22 @@ enum { CLK_I2C0_SEL_MASK = 1 << CLK_I2C0_SEL_SHIFT, CLK_I2C_SEL_200M = 0, CLK_I2C_SEL_100M, + + /* SECURECRU_CLKSEL_CON01 */ + SCMI_HCLK_SD_SEL_SHIFT = 2, + SCMI_HCLK_SD_SEL_MASK = 3 << SCMI_HCLK_SD_SEL_SHIFT, + SCMI_HCLK_SD_SEL_150M = 0, + SCMI_HCLK_SD_SEL_100M, + SCMI_HCLK_SD_SEL_50M, + SCMI_HCLK_SD_SEL_24M, + + /* SECURECRU_CLKSEL_CON03 */ + SCMI_CCLK_SD_SEL_SHIFT = 12, + SCMI_CCLK_SD_SEL_MASK = 3 << SCMI_CCLK_SD_SEL_SHIFT, + SCMI_CCLK_SD_SEL_GPLL = 0, + SCMI_CCLK_SD_SEL_SPLL, + SCMI_CCLK_SD_SEL_24M, + SCMI_CCLK_SD_DIV_SHIFT = 6, + SCMI_CCLK_SD_DIV_MASK = 0x3f << SCMI_CCLK_SD_DIV_SHIFT, }; #endif diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c index a7df553e87..41e31b61a5 100644 --- a/drivers/clk/rockchip/clk_rk3588.c +++ b/drivers/clk/rockchip/clk_rk3588.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -1994,3 +1995,127 @@ U_BOOT_DRIVER(rockchip_rk3588_cru) = { .bind = rk3588_clk_bind, .probe = rk3588_clk_probe, }; + +#ifdef CONFIG_SPL_BUILD +#define SCRU_BASE 0xfd7d0000 + +static ulong rk3588_scru_clk_get_rate(struct clk *clk) +{ + u32 con, div, sel, parent; + + switch (clk->id) { + case SCMI_CCLK_SD: + con = readl(SCRU_BASE + RK3588_CLKSEL_CON(3)); + sel = (con & SCMI_CCLK_SD_SEL_MASK) >> SCMI_CCLK_SD_SEL_SHIFT; + div = (con & SCMI_CCLK_SD_DIV_MASK) >> SCMI_CCLK_SD_DIV_SHIFT; + if (sel == SCMI_CCLK_SD_SEL_GPLL) + parent = GPLL_HZ; + else if (sel == SCMI_CCLK_SD_SEL_SPLL) + parent = SPLL_HZ; + else + parent = OSC_HZ; + return DIV_TO_RATE(parent, div); + case SCMI_HCLK_SD: + con = readl(SCRU_BASE + RK3588_CLKSEL_CON(1)); + sel = (con & SCMI_HCLK_SD_SEL_MASK) >> SCMI_HCLK_SD_SEL_SHIFT; + if (sel == SCMI_HCLK_SD_SEL_150M) + return 150 * MHz; + else if (sel == SCMI_HCLK_SD_SEL_100M) + return 100 * MHz; + else if (sel == SCMI_HCLK_SD_SEL_50M) + return 50 * MHz; + else + return OSC_HZ; + default: + return -ENOENT; + } +} + +static ulong rk3588_scru_clk_set_rate(struct clk *clk, ulong rate) +{ + u32 div, sel; + + switch (clk->id) { + case SCMI_CCLK_SD: + if ((OSC_HZ % rate) == 0) { + sel = SCMI_CCLK_SD_SEL_24M; + div = DIV_ROUND_UP(OSC_HZ, rate); + } else if ((SPLL_HZ % rate) == 0) { + sel = SCMI_CCLK_SD_SEL_SPLL; + div = DIV_ROUND_UP(SPLL_HZ, rate); + } else { + sel = SCMI_CCLK_SD_SEL_GPLL; + div = DIV_ROUND_UP(GPLL_HZ, rate); + } + rk_clrsetreg(SCRU_BASE + RK3588_CLKSEL_CON(3), + SCMI_CCLK_SD_SEL_MASK | SCMI_CCLK_SD_DIV_MASK, + sel << SCMI_CCLK_SD_SEL_SHIFT | + (div - 1) << SCMI_CCLK_SD_DIV_SHIFT); + break; + case SCMI_HCLK_SD: + if (rate >= 150 * MHz) + sel = SCMI_HCLK_SD_SEL_150M; + else if (rate >= 100 * MHz) + sel = SCMI_HCLK_SD_SEL_100M; + else if (rate >= 50 * MHz) + sel = SCMI_HCLK_SD_SEL_50M; + else + sel = SCMI_HCLK_SD_SEL_24M; + rk_clrsetreg(SCRU_BASE + RK3588_CLKSEL_CON(1), + SCMI_HCLK_SD_SEL_MASK, + sel << SCMI_HCLK_SD_SEL_SHIFT); + break; + default: + return -ENOENT; + } + + return rk3588_scru_clk_get_rate(clk); +} + +static const struct clk_ops rk3588_scru_clk_ops = { + .get_rate = rk3588_scru_clk_get_rate, + .set_rate = rk3588_scru_clk_set_rate, +}; + +U_BOOT_DRIVER(rockchip_rk3588_scru) = { + .name = "rockchip_rk3588_scru", + .id = UCLASS_CLK, + .ops = &rk3588_scru_clk_ops, +}; + +static int rk3588_scmi_spl_glue_bind(struct udevice *dev) +{ + ofnode node; + u32 protocol_id; + const char *name; + + dev_for_each_subnode(node, dev) { + if (!ofnode_is_enabled(node)) + continue; + + if (ofnode_read_u32(node, "reg", &protocol_id)) + continue; + + if (protocol_id != SCMI_PROTOCOL_ID_CLOCK) + continue; + + name = ofnode_get_name(node); + return device_bind_driver_to_node(dev, "rockchip_rk3588_scru", + name, node, NULL); + } + + return -ENOENT; +} + +static const struct udevice_id rk3588_scmi_spl_glue_ids[] = { + { .compatible = "arm,scmi-smc" }, + { } +}; + +U_BOOT_DRIVER(rk3588_scmi_spl_glue) = { + .name = "rk3588_scmi_spl_glue", + .id = UCLASS_NOP, + .of_match = rk3588_scmi_spl_glue_ids, + .bind = rk3588_scmi_spl_glue_bind, +}; +#endif