From: Andre Przywara Date: Mon, 13 May 2024 23:46:59 +0000 (+0100) Subject: power: pmic: sunxi: use generic AXP SPL driver for AXP313 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=670c0324a1b570088cfb34523d5edd295fbc60c9;p=u-boot.git power: pmic: sunxi: use generic AXP SPL driver for AXP313 The generic AXP SPL driver implementation can cover all regulators we need for the AXP313. Add the descriptions for the three DC/DC regulators of the AXP313, and enable that when CONFIG_AXP313_POWER is enabled. Also remove the old driver, and switch the Makefile to include the new, generic version. Signed-off-by: Andre Przywara --- diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 67161b3e74..312edec041 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -13,7 +13,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP305_POWER) += axp305.o -obj-$(CONFIG_AXP313_POWER) += axp313.o +obj-$(CONFIG_AXP313_POWER) += axp_spl.o obj-$(CONFIG_AXP717_POWER) += axp_spl.o obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o diff --git a/drivers/power/axp313.c b/drivers/power/axp313.c deleted file mode 100644 index 09ecb5b1ec..0000000000 --- a/drivers/power/axp313.c +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * AXP313(a) driver - * - * (C) Copyright 2023 Arm Ltd. - * - * Based on axp305.c - * (C) Copyright 2020 Jernej Skrabec - * (C) Copyright 2014 Hans de Goede - * (C) Copyright 2013 Oliver Schinagl - */ - -#include -#include -#include -#include - -enum axp313_reg { - AXP313_CHIP_VERSION = 0x03, - AXP313_OUTPUT_CTRL = 0x10, - AXP313_DCDC1_CTRL = 0x13, - AXP313_SHUTDOWN = 0x1a, -}; - -#define AXP313_CHIP_VERSION_MASK 0xcf -#define AXP313_CHIP_VERSION_AXP1530 0x48 -#define AXP313_CHIP_VERSION_AXP313A 0x4b -#define AXP313_CHIP_VERSION_AXP313B 0x4c - -#define AXP313_DCDC_SPLIT_OFFSET 71 -#define AXP313_DCDC_SPLIT_MVOLT 1200 - -#define AXP313_POWEROFF BIT(7) - -static u8 mvolt_to_cfg(int mvolt, int min, int max, int div) -{ - if (mvolt < min) - mvolt = min; - else if (mvolt > max) - mvolt = max; - - return (mvolt - min) / div; -} - -static int axp_set_dcdc(int dcdc_num, unsigned int mvolt) -{ - int ret; - u8 cfg, enable_mask = 1U << (dcdc_num - 1); - int volt_reg = AXP313_DCDC1_CTRL + dcdc_num - 1; - int max_mV; - - switch (dcdc_num) { - case 1: - case 2: - max_mV = 1540; - break; - case 3: - /* - * The manual defines a different split point, but tests - * show that it's the same 1200mV as for DCDC1/2. - */ - max_mV = 1840; - break; - default: - return -EINVAL; - } - - if (mvolt > AXP313_DCDC_SPLIT_MVOLT) - cfg = AXP313_DCDC_SPLIT_OFFSET + mvolt_to_cfg(mvolt, - AXP313_DCDC_SPLIT_MVOLT + 20, max_mV, 20); - else - cfg = mvolt_to_cfg(mvolt, 500, AXP313_DCDC_SPLIT_MVOLT, 10); - - if (mvolt == 0) - return pmic_bus_clrbits(AXP313_OUTPUT_CTRL, enable_mask); - - debug("DCDC%d: writing 0x%x to reg 0x%x\n", dcdc_num, cfg, volt_reg); - ret = pmic_bus_write(volt_reg, cfg); - if (ret) - return ret; - - return pmic_bus_setbits(AXP313_OUTPUT_CTRL, enable_mask); -} - -int axp_set_dcdc2(unsigned int mvolt) -{ - return axp_set_dcdc(2, mvolt); -} - -int axp_set_dcdc3(unsigned int mvolt) -{ - return axp_set_dcdc(3, mvolt); -} - -int axp_init(void) -{ - u8 axp_chip_id; - int ret; - - ret = pmic_bus_init(); - if (ret) - return ret; - - ret = pmic_bus_read(AXP313_CHIP_VERSION, &axp_chip_id); - if (ret) - return ret; - - axp_chip_id &= AXP313_CHIP_VERSION_MASK; - switch (axp_chip_id) { - case AXP313_CHIP_VERSION_AXP1530: - case AXP313_CHIP_VERSION_AXP313A: - case AXP313_CHIP_VERSION_AXP313B: - break; - default: - debug("unknown PMIC: 0x%x\n", axp_chip_id); - return -EINVAL; - } - - return ret; -} - -#if !CONFIG_IS_ENABLED(ARM_PSCI_FW) && !IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF) -int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - pmic_bus_write(AXP313_SHUTDOWN, AXP313_POWEROFF); - - /* infinite loop during shutdown */ - while (1) {} - - /* not reached */ - return 0; -} -#endif diff --git a/drivers/power/axp_spl.c b/drivers/power/axp_spl.c index 0382d91cb4..68cbf60eed 100644 --- a/drivers/power/axp_spl.c +++ b/drivers/power/axp_spl.c @@ -36,6 +36,20 @@ static const struct axp_reg_desc_spl axp_spl_dcdc_regulators[] = { #define AXP_SHUTDOWN_REG 0x27 #define AXP_SHUTDOWN_MASK BIT(0) +#elif defined(CONFIG_AXP313_POWER) /* AXP313 */ + +static const struct axp_reg_desc_spl axp_spl_dcdc_regulators[] = { + { 0x10, BIT(0), 0x13, 0x7f, 500, 1540, 10, 70 }, + { 0x10, BIT(1), 0x14, 0x7f, 500, 1540, 10, 70 }, + { 0x10, BIT(2), 0x15, 0x7f, 500, 1840, 10, 70 }, +}; + +#define AXP_CHIP_VERSION 0x3 +#define AXP_CHIP_VERSION_MASK 0xc8 +#define AXP_CHIP_ID 0x48 +#define AXP_SHUTDOWN_REG 0x1a +#define AXP_SHUTDOWN_MASK BIT(7) + #else #error "Please define the regulator registers in axp_spl_regulators[]."