From: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Wed, 3 May 2023 05:46:20 +0000 (+0200)
Subject: board: cssi: Remove duplicated FPGA loading sequence on CMPC885
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=66d23d2237dda5d7bffe420018b6713d71351e67;p=u-boot.git

board: cssi: Remove duplicated FPGA loading sequence on CMPC885

A duplicated FPGA loading sequence appears after FPGA reset.

Remove it.

Fixes: dac3c6f625 ("board: cssi: Add new board MCR3000_2G")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---

diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c
index 540b9d3c78..02da4d9a87 100644
--- a/board/cssi/cmpc885/cmpc885.c
+++ b/board/cssi/cmpc885/cmpc885.c
@@ -896,20 +896,6 @@ int board_early_init_r(void)
 			}
 		}
 
-		/* is FPGA firmware loaded ? */
-		if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
-			printf("Reloading FPGA firmware\n");
-
-			/* Load FPGA firmware */
-			/* Activate PROG_FPGA_FIRMWARE for 1 usec */
-			clrbits_be32(&cp->cp_pedat, 0x00000002);
-			udelay(1);
-			setbits_be32(&cp->cp_pedat, 0x00000002);
-
-			/* Wait 200ms before checking DONE_FPGA_FIRMWARE */
-			mdelay(200);
-		}
-
 		iop_setup_common();
 	} else {
 		iop_setup_cmpc885();