From: Andre Przywara Date: Mon, 15 Jul 2019 01:27:05 +0000 (+0100) Subject: sunxi: H6: DRAM: follow recommended PHY init algorithm X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=65f80f58049a820e7d1ed7b0b0d233885ce6ebb2;p=u-boot.git sunxi: H6: DRAM: follow recommended PHY init algorithm The DRAM controller manual suggests to first program the PHY initialisation parameters to the PHY_PIR register, and then set bit 0 to trigger the initialisation. This is also used in boot0. Follow this recommendation by setting bit 0 in a separate step. Signed-off-by: Andre Przywara Tested-by: Jernej Skrabec Reviewed-by: Jernej Skrabec Reviewed-by: Jagan Teki --- diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c index e2f141eb9b..7a8b724f08 100644 --- a/arch/arm/mach-sunxi/dram_sun50i_h6.c +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -75,12 +75,14 @@ static void mctl_core_init(struct dram_para *para) mctl_channel_init(para); } +/* PHY initialisation */ static void mctl_phy_pir_init(u32 val) { struct sunxi_mctl_phy_reg * const mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; - writel(val | BIT(0), &mctl_phy->pir); + writel(val, &mctl_phy->pir); + writel(val | BIT(0), &mctl_phy->pir); /* Start initialisation. */ mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0)); }