From: Andre Renaud <andre@designa-electronics.com>
Date: Thu, 5 May 2016 13:28:15 +0000 (-0600)
Subject: at91: nand: Set up the ECC strength correctly
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=65319f15ca6ed1be6ca12576fe96a338352d45b7;p=u-boot.git

at91: nand: Set up the ECC strength correctly

This needs to be set to avoid a fatal error when ECC is used.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
---

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index debf93318a..ad5ded3a56 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1156,6 +1156,7 @@ int atmel_hwecc_nand_init_param(struct nand_chip *nand, struct mtd_info *mtd)
 	nand->ecc.hwctl = atmel_nand_hwctl;
 	nand->ecc.read_page = atmel_nand_read_page;
 	nand->ecc.bytes = 4;
+	nand->ecc.strength = 4;
 
 	if (nand->ecc.mode == NAND_ECC_HW) {
 		/* ECC is calculated for the whole page (1 step) */