From: Marc Zyngier Date: Sat, 12 Jul 2014 13:24:00 +0000 (+0100) Subject: ARM: non-sec: reset CNTVOFF to zero X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=64fd44dcae0daafb011f98d4b2d4e1f28036b99e;p=u-boot.git ARM: non-sec: reset CNTVOFF to zero Before switching to non-secure, make sure that CNTVOFF is set to zero on all CPUs. Otherwise, kernel running in non-secure without HYP enabled (hence using virtual timers) may observe timers that are not synchronized, effectively seeing time going backward... Signed-off-by: Marc Zyngier Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 12de5c2d17..b5c946fc4e 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -38,10 +38,10 @@ _secure_monitor: bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits orr r1, r1, #0x31 @ enable NS, AW, FW bits -#ifdef CONFIG_ARMV7_VIRT mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 and r0, r0, #CPUID_ARM_VIRT_MASK @ mask virtualization bits cmp r0, #(1 << CPUID_ARM_VIRT_SHIFT) +#ifdef CONFIG_ARMV7_VIRT orreq r1, r1, #0x100 @ allow HVC instruction #endif @@ -52,7 +52,14 @@ _secure_monitor: mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value mcreq p15, 4, r0, c12, c0, 0 @ write HVBAR #endif + bne 1f + @ Reset CNTVOFF to 0 before leaving monitor mode + mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1 + ands r0, r0, #CPUID_ARM_GENTIMER_MASK @ test arch timer bits + movne r0, #0 + mcrrne p15, 4, r0, r0, c14 @ Reset CNTVOFF to zero +1: movs pc, lr @ return to non-secure SVC _hyp_trap: