From: Marek Behún <marek.behun@nic.cz>
Date: Tue, 24 Apr 2018 15:21:13 +0000 (+0200)
Subject: phy: marvell: a3700: Use reg_set16 instead of phy_write16
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=63cfff9fdeced543eb41093b0a143b4ba03cb0e1;p=u-boot.git

phy: marvell: a3700: Use reg_set16 instead of phy_write16

The macro phy_write16 is not used by the rest of the code,
phy_read16 is not used at all.
We also change the macro SGMIIPHY_ADDR to a static inline function.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 71fd8dcbdf..3d913f4342 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -610,7 +610,7 @@ static void comphy_sgmii_phy_init(u32 lane, u32 speed)
 			val = sgmii_phy_init[addr];
 		}
 
-		phy_write16(lane, addr, val, 0xFFFF);
+		reg_set16(sgmiiphy_addr(lane, addr), val, 0xFFFF);
 	}
 }
 
@@ -673,26 +673,26 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	mdelay(10);
 
 	/* 9. Program COMPHY register PHY_MODE */
-	phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR,
-		    PHY_MODE_SGMII << rf_phy_mode_shift, rf_phy_mode_mask);
+	reg_set16(sgmiiphy_addr(lane, PHY_PWR_PLL_CTRL_ADDR),
+		  PHY_MODE_SGMII << rf_phy_mode_shift, rf_phy_mode_mask);
 
 	/*
 	 * 10. Set COMPHY register REFCLK_SEL to select the correct REFCLK
 	 *     source
 	 */
-	phy_write16(lane, PHY_MISC_REG0_ADDR, 0, rb_ref_clk_sel);
+	reg_set16(sgmiiphy_addr(lane, PHY_MISC_REG0_ADDR), 0, rb_ref_clk_sel);
 
 	/*
 	 * 11. Set correct reference clock frequency in COMPHY register
 	 *     REF_FREF_SEL.
 	 */
 	if (get_ref_clk() == 40) {
-		phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR,
-			    0x4 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask);
+		reg_set16(sgmiiphy_addr(lane, PHY_PWR_PLL_CTRL_ADDR),
+			  0x4 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask);
 	} else {
 		/* 25MHz */
-		phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR,
-			    0x1 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask);
+		reg_set16(sgmiiphy_addr(lane, PHY_PWR_PLL_CTRL_ADDR),
+			  0x1 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask);
 	}
 
 	/* 12. Program COMPHY register PHY_GEN_MAX[1:0] */
@@ -708,7 +708,8 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	 *     bus width
 	 */
 	/* 10bit */
-	phy_write16(lane, PHY_DIG_LB_EN_ADDR, 0, rf_data_width_mask);
+	reg_set16(sgmiiphy_addr(lane, PHY_DIG_LB_EN_ADDR), 0,
+		  rf_data_width_mask);
 
 	/*
 	 * 14. As long as DFE function needs to be enabled in any mode,
@@ -751,10 +752,12 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
 	 * 18. Check the PHY Polarity invert bit
 	 */
 	if (invert & PHY_POLARITY_TXD_INVERT)
-		phy_write16(lane, PHY_SYNC_PATTERN_ADDR, phy_txd_inv, 0);
+		reg_set16(sgmiiphy_addr(lane, PHY_SYNC_PATTERN_ADDR),
+			  phy_txd_inv, 0);
 
 	if (invert & PHY_POLARITY_RXD_INVERT)
-		phy_write16(lane, PHY_SYNC_PATTERN_ADDR, phy_rxd_inv, 0);
+		reg_set16(sgmiiphy_addr(lane, PHY_SYNC_PATTERN_ADDR),
+			  phy_rxd_inv, 0);
 
 	/*
 	 * 19. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1
diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h
index d41a1aa516..ca8c648c35 100644
--- a/drivers/phy/marvell/comphy_a3700.h
+++ b/drivers/phy/marvell/comphy_a3700.h
@@ -60,13 +60,14 @@
 #define USB32_CTRL_BASE			MVEBU_REG(0x05D800)
 #define USB3PHY_SHFT			2
 
-#define SGMIIPHY_BASE(l)	(l == 1 ? USB3PHY_BASE : PCIEPHY_BASE)
-#define SGMIIPHY_ADDR(l, a)		\
-	((void __iomem *)(((a & 0x00007FF) * 2) + SGMIIPHY_BASE(l)))
-
-#define phy_read16(l, a)	read16((void __iomem *)SGMIIPHY_ADDR(l, a))
-#define phy_write16(l, a, data, mask)	\
-	reg_set16(SGMIIPHY_ADDR(l, a), data, mask)
+static inline void __iomem *sgmiiphy_addr(u32 lane, u32 addr)
+{
+	addr = (addr & 0x00007FF) * 2;
+	if (lane == 1)
+		return PCIEPHY_BASE + addr;
+	else
+		return USB3PHY_BASE + addr;
+}
 
 /* units */
 #define PCIE				1