From: Aswath Govindraju Date: Fri, 20 Nov 2020 15:48:55 +0000 (+0530) Subject: arm: dts: am654-base-board-uboot: Add aliases for USB subsystems X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=62be2367f5f8f2e83cedbe2189263b73d5f57834;p=u-boot.git arm: dts: am654-base-board-uboot: Add aliases for USB subsystems The sequence number assigned for USB subsystem in a uclass is dependent on the order of occurrence in the device tree. If the dr_mode of USB3SS0 controller is varied then the sequence number of USB3SS1 controller also changes. If aliases are added then sequence numbers are assigned using the alias number. This makes the sequence number of USB3SS1 controller independent of USB3SS0 controller's dr_mode. Therefore, add aliases to fix the sequence number assigned to the USB subsystems. Signed-off-by: Aswath Govindraju --- diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index bd2f334c2b..727bc3e8a0 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -14,6 +14,8 @@ aliases { serial2 = &main_uart0; ethernet0 = &cpsw_port1; + usb0 = &usb0; + usb1 = &usb1; }; };