From: Miquel Raynal Date: Thu, 11 Oct 2018 15:45:42 +0000 (+0200) Subject: mtd: nand: pxa3xx: add raw read support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6293b0361d9;p=u-boot.git mtd: nand: pxa3xx: add raw read support Raw read support is added by editing a few code sections: ->handle_data_pio() includes the ECC bytes that are not consumed anymore by the ECC engine. ->prepare_set_command() is changed so that the ECC bytes are requested as part of the data I/O length. ->drain_fifo() shall also avoid checking the R/B pin too often when in raw mode. ->read_page_raw()/->read_oob_raw() are written from scratch. Signed-off-by: Miquel Raynal Acked-by: Jagan Teki --- diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c index 4c783f1e1e..454597355b 100644 --- a/drivers/mtd/nand/raw/pxa3xx_nand.c +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c @@ -195,6 +195,7 @@ struct pxa3xx_nand_info { int cs; int use_ecc; /* use HW ECC ? */ + int force_raw; /* prevent use_ecc to be set */ int ecc_bch; /* using BCH ECC? */ int use_spare; /* use spare ? */ int need_wait; @@ -579,7 +580,7 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) { - if (info->ecc_bch) { + if (info->ecc_bch && !info->force_raw) { u32 ts; /* @@ -612,12 +613,22 @@ static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) static void handle_data_pio(struct pxa3xx_nand_info *info) { + int data_len = info->step_chunk_size; + + /* + * In raw mode, include the spare area and the ECC bytes that are not + * consumed by the controller in the data section. Do not reorganize + * here, do it in the ->read_page_raw() handler instead. + */ + if (info->force_raw) + data_len += info->step_spare_size + info->ecc_size; + switch (info->state) { case STATE_PIO_WRITING: if (info->step_chunk_size) writesl(info->mmio_base + NDDB, info->data_buff + info->data_buff_pos, - DIV_ROUND_UP(info->step_chunk_size, 4)); + DIV_ROUND_UP(data_len, 4)); if (info->step_spare_size) writesl(info->mmio_base + NDDB, @@ -628,7 +639,10 @@ static void handle_data_pio(struct pxa3xx_nand_info *info) if (info->step_chunk_size) drain_fifo(info, info->data_buff + info->data_buff_pos, - DIV_ROUND_UP(info->step_chunk_size, 4)); + DIV_ROUND_UP(data_len, 4)); + + if (info->force_raw) + break; if (info->step_spare_size) drain_fifo(info, @@ -642,7 +656,7 @@ static void handle_data_pio(struct pxa3xx_nand_info *info) } /* Update buffer pointers for multi-page read/write */ - info->data_buff_pos += info->step_chunk_size; + info->data_buff_pos += data_len; info->oob_buff_pos += info->step_spare_size; } @@ -796,7 +810,8 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command) case NAND_CMD_READ0: case NAND_CMD_READOOB: case NAND_CMD_PAGEPROG: - info->use_ecc = 1; + if (!info->force_raw) + info->use_ecc = 1; break; case NAND_CMD_PARAM: info->use_spare = 0; @@ -866,7 +881,13 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command, * which is either naked-read or last-read according to the * state. */ - if (mtd->writesize == info->chunk_size) { + if (info->force_raw) { + info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) | + NDCB0_LEN_OVRD | + NDCB0_EXT_CMD_TYPE(ext_cmd_type); + info->ndcb3 = info->step_chunk_size + + info->step_spare_size + info->ecc_size; + } else if (mtd->writesize == info->chunk_size) { info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); } else if (mtd->writesize > info->chunk_size) { info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) @@ -1238,6 +1259,69 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd, return info->max_bitflips; } +static int pxa3xx_nand_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct pxa3xx_nand_host *host = chip->priv; + struct pxa3xx_nand_info *info = host->info_data; + int chunk, ecc_off_buf; + + if (!info->ecc_bch) + return -ENOTSUPP; + + /* + * Set the force_raw boolean, then re-call ->cmdfunc() that will run + * pxa3xx_nand_start(), which will actually disable the ECC engine. + */ + info->force_raw = true; + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); + + ecc_off_buf = (info->nfullchunks * info->spare_size) + + info->last_spare_size; + for (chunk = 0; chunk < info->nfullchunks; chunk++) { + chip->read_buf(mtd, + buf + (chunk * info->chunk_size), + info->chunk_size); + chip->read_buf(mtd, + chip->oob_poi + + (chunk * (info->spare_size)), + info->spare_size); + chip->read_buf(mtd, + chip->oob_poi + ecc_off_buf + + (chunk * (info->ecc_size)), + info->ecc_size - 2); + } + + if (info->ntotalchunks > info->nfullchunks) { + chip->read_buf(mtd, + buf + (info->nfullchunks * info->chunk_size), + info->last_chunk_size); + chip->read_buf(mtd, + chip->oob_poi + + (info->nfullchunks * (info->spare_size)), + info->last_spare_size); + chip->read_buf(mtd, + chip->oob_poi + ecc_off_buf + + (info->nfullchunks * (info->ecc_size)), + info->ecc_size - 2); + } + + info->force_raw = false; + + return 0; +} + +static int pxa3xx_nand_read_oob_raw(struct mtd_info *mtd, + struct nand_chip *chip, int page) +{ + /* Invalidate page cache */ + chip->pagebuf = -1; + + return chip->ecc.read_page_raw(mtd, chip, chip->buffers->databuf, true, + page); +} + static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); @@ -1669,6 +1753,8 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info) nand_set_controller_data(chip, host); chip->ecc.read_page = pxa3xx_nand_read_page_hwecc; + chip->ecc.read_page_raw = pxa3xx_nand_read_page_raw; + chip->ecc.read_oob_raw = pxa3xx_nand_read_oob_raw; chip->ecc.write_page = pxa3xx_nand_write_page_hwecc; chip->controller = &info->controller; chip->waitfunc = pxa3xx_nand_waitfunc;