From: Heiko Schocher Date: Sun, 1 Dec 2019 10:23:19 +0000 (+0100) Subject: imx6: aristainetos: add DM_VIDEO support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=621ff1363cba10281ba75f472c6731da48c3344d;p=u-boot.git imx6: aristainetos: add DM_VIDEO support add DM_VIDEO support and remove now unneeded board code. As we show a bmp logo on boot, call now bmp_display() from board code and do not use cfb_console anymore. Signed-off-by: Heiko Schocher --- diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index f08f09e17f..8d07edd3e0 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -19,24 +19,19 @@ #include #include #include -#include #include -#include -#include -#include #include #include +#include #include #include #include #include #include -#include -#include <../drivers/video/imx/ipu.h> -#if defined(CONFIG_VIDEO_BMP_LOGO) - #include -#endif +#include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -46,8 +41,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -#define DISP_PAD_CTRL (0x10) - enum { BOARD_TYPE_4 = 4, BOARD_TYPE_7 = 7, @@ -91,37 +84,6 @@ static iomux_v3_cfg_t const backlight_pads[] = { MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -static iomux_v3_cfg_t const display_pads[] = { - MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL), - MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, - MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, - MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, - MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00, - MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01, - MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02, - MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03, - MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04, - MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05, - MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06, - MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07, - MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08, - MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09, - MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10, - MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11, - MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12, - MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13, - MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14, - MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15, - MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16, - MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17, - MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18, - MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19, - MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20, - MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21, - MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22, - MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23, -}; - int board_phy_config(struct phy_device *phydev) { /* control data pad skew - devaddr = 0x02, register = 0x04 */ @@ -166,13 +128,15 @@ static int rotate_logo_one(unsigned char *out, unsigned char *in) void rotate_logo(int rotations) { unsigned char out_logo[BMP_LOGO_WIDTH * BMP_LOGO_HEIGHT]; + struct bmp_header *header; unsigned char *in_logo; int i, j; if (BMP_LOGO_WIDTH != BMP_LOGO_HEIGHT) return; - in_logo = bmp_logo_bitmap; + header = (struct bmp_header *)bmp_logo_bitmap; + in_logo = bmp_logo_bitmap + header->data_offset; /* one 90 degree rotation */ if (rotations == 1 || rotations == 2 || rotations == 3) @@ -194,34 +158,6 @@ void rotate_logo(int rotations) out_logo[i * BMP_LOGO_WIDTH + j]; } -static void enable_display_power(void) -{ - imx_iomux_v3_setup_multiple_pads(backlight_pads, - ARRAY_SIZE(backlight_pads)); - - /* backlight enable */ - gpio_request(IMX_GPIO_NR(6, 31), "backlight"); - gpio_direction_output(IMX_GPIO_NR(6, 31), 1); - gpio_free(IMX_GPIO_NR(6, 31)); - /* LCD power enable */ - gpio_request(IMX_GPIO_NR(6, 15), "LCD_power_enable"); - gpio_direction_output(IMX_GPIO_NR(6, 15), 1); - gpio_free(IMX_GPIO_NR(6, 15)); - - /* enable backlight PWM 1 */ - if (pwm_init(0, 0, 0)) - goto error; - /* duty cycle 500ns, period: 3000ns */ - if (pwm_config(0, 50000, 300000)) - goto error; - if (pwm_enable(0)) - goto error; - return; - -error: - puts("error init pwm for backlight\n"); -} - static void enable_lvds(struct display_info_t const *dev) { struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -304,15 +240,6 @@ static void enable_spi_display(struct display_info_t const *dev) rotate_logo(3); /* portrait display in landscape mode */ #endif - /* - * set ldb clock to 28341000 Hz calculated through the formula: - * (XRES + LEFT_M + RIGHT_M + HSYNC_LEN) * - * (YRES + UPPER_M + LOWER_M + VSYNC_LEN) * REFRESH) - * see: - * https://community.freescale.com/thread/308170 - */ - ipu_set_ldb_clock(28341000); - reg = readl(&ccm->cs2cdr); /* select pll 5 clock */ @@ -381,15 +308,11 @@ static void enable_spi_display(struct display_info_t const *dev) | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); writel(reg, &iomux->gpr[3]); - - imx_iomux_v3_setup_multiple_pads(display_pads, - ARRAY_SIZE(display_pads)); } static void setup_display(void) { enable_ipu_clock(); - enable_display_power(); } static void set_gpr_register(void) @@ -410,7 +333,7 @@ static void set_gpr_register(void) extern char __bss_start[], __bss_end[]; int board_early_init_f(void) { - setup_display(); + select_ldb_di_clock_source(MXC_PLL5_CLK); set_gpr_register(); /* @@ -453,11 +376,13 @@ int board_late_init(void) { char *my_bootdelay; char bootmode = 0; - char const *panel = env_get("panel"); struct gpio_desc *desc; + int x, y; int ret; led_default_state(); + splash_get_pos(&x, &y); + bmp_display((ulong)&bmp_logo_bitmap[0], x, y); /* * Check the boot-source. If booting from NOR Flash, * disable bootdelay @@ -496,13 +421,6 @@ int board_late_init(void) } } - /* if we have the lg panel, we can initialze it now */ - if (panel) - if (!strcmp(panel, displays[1].mode.name)) - lg4573_spi_startup(CONFIG_LG4573_BUS, - CONFIG_LG4573_CS, - 10000000, SPI_MODE_0); - /* set board_type */ if (gd->board_type == BOARD_TYPE_4) env_set("board_type", ARI_BT_4); @@ -596,12 +514,6 @@ struct display_info_t const displays[] = { }; size_t display_count = ARRAY_SIZE(displays); -/* no console on this board */ -int board_cfb_skip(void) -{ - return 1; -} - iomux_v3_cfg_t nfc_pads[] = { MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -673,6 +585,7 @@ int board_init(void) setup_board_gpio(); setup_gpmi_nand(); + setup_display(); /* GPIO_1 for USB_OTG_ID */ clrsetbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK, 0); diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index 92771555fa..243b4ff5aa 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -92,8 +92,9 @@ CONFIG_MXC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_STORAGE=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_DISPLAY=y CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y -# CONFIG_VIDEO_SW_CURSOR is not set CONFIG_IMX_WATCHDOG=y # CONFIG_EFI_LOADER is not set diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index ced2bab2b5..45699dc614 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -32,7 +32,7 @@ "imi ${fit_addr_r}\0 " /* Framebuffer */ -#define CONFIG_SYS_LDB_CLOCK 33246000 +#define CONFIG_SYS_LDB_CLOCK 28341000 #define CONFIG_LG4573 #include "mx6_common.h" @@ -193,15 +193,14 @@ /* Framebuffer */ /* check this console not needed, after test remove it */ -#define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP +#define CONFIG_IMX_VIDEO_SKIP #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX6_PWM_PER_CLK 66000000 - #endif /* __ARISTAINETOS2_CONFIG_H */