From: Vignesh Raghavendra Date: Tue, 16 Apr 2019 16:01:59 +0000 (+0530) Subject: spi: ti_qspi: Drop non DM code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=61ae9782efdcd02b192df7ca4f062b6036df3f2b;p=u-boot.git spi: ti_qspi: Drop non DM code Now that all boards using TI QSPI have moved to DM and DT, drop non DM code completely. Signed-off-by: Vignesh Raghavendra Reviewed-by: Tom Rini [jagan: update MIGRATION.txt, rebase config_whitelist.txt] Signed-off-by: Jagan Teki Reviewed-by: Jagan Teki --- diff --git a/doc/driver-model/MIGRATION.txt b/doc/driver-model/MIGRATION.txt index 957529202b..df659f3dd9 100644 --- a/doc/driver-model/MIGRATION.txt +++ b/doc/driver-model/MIGRATION.txt @@ -77,7 +77,6 @@ Partially converted: drivers/spi/kirkwood_spi.c drivers/spi/mxc_spi.c drivers/spi/omap3_spi.c - drivers/spi/ti_qspi.c Status: In progress Deadline: 2019.07 diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a700f240ad..fb794adae7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -259,6 +259,13 @@ config TEGRA210_QSPI be used to access SPI chips on platforms embedding this NVIDIA Tegra210 IP core. +config TI_QSPI + bool "TI QSPI driver" + imply TI_EDMA3 + help + Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. + This driver support spi flash single, quad and memory reads. + config XILINX_SPI bool "Xilinx SPI driver" help @@ -346,12 +353,6 @@ config SH_QSPI Enable the Renesas Quad SPI controller driver. This driver can be used on Renesas SoCs. -config TI_QSPI - bool "TI QSPI driver" - help - Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. - This driver support spi flash single, quad and memory reads. - config KIRKWOOD_SPI bool "Marvell Kirkwood SPI Driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 01907bef79..8be9a4baa2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -9,6 +9,7 @@ obj-y += spi-uclass.o obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o obj-$(CONFIG_SOFT_SPI) += soft_spi.o obj-$(CONFIG_SPI_MEM) += spi-mem.o +obj-$(CONFIG_TI_QSPI) += ti_qspi.o else obj-y += spi.o obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o @@ -56,7 +57,6 @@ obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o -obj-$(CONFIG_TI_QSPI) += ti_qspi.o obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 2dcce66de0..731fb23022 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -52,9 +52,6 @@ DECLARE_GLOBAL_DATA_PTR; #define MM_SWITCH 0x01 #define MEM_CS(cs) ((cs + 1) << 8) #define MEM_CS_UNSELECT 0xfffff8ff -#define MMAP_START_ADDR_DRA 0x5c000000 -#define MMAP_START_ADDR_AM43x 0x30000000 -#define CORE_CTRL_IO 0x4a002558 #define QSPI_CMD_READ (0x3 << 0) #define QSPI_CMD_READ_DUAL (0x6b << 0) @@ -98,13 +95,9 @@ struct ti_qspi_regs { /* ti qspi priv */ struct ti_qspi_priv { -#ifndef CONFIG_DM_SPI - struct spi_slave slave; -#else void *memory_map; uint max_hz; u32 num_cs; -#endif struct ti_qspi_regs *base; void *ctrl_mod_mmap; ulong fclk; @@ -113,8 +106,9 @@ struct ti_qspi_priv { u32 dc; }; -static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz) +static int ti_qspi_set_speed(struct udevice *bus, uint hz) { + struct ti_qspi_priv *priv = dev_get_priv(bus); uint clk_div; if (!hz) @@ -133,6 +127,8 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz) &priv->base->clk_ctrl); /* enable SCLK and program the clk divider */ writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl); + + return 0; } static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv) @@ -142,38 +138,6 @@ static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv) readl(&priv->base->cmd); } -static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode) -{ - priv->dc = 0; - if (mode & SPI_CPHA) - priv->dc |= QSPI_CKPHA(0); - if (mode & SPI_CPOL) - priv->dc |= QSPI_CKPOL(0); - if (mode & SPI_CS_HIGH) - priv->dc |= QSPI_CSPOL(0); - - return 0; -} - -static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs) -{ - writel(priv->dc, &priv->base->dc); - writel(0, &priv->base->cmd); - writel(0, &priv->base->data); - - priv->dc <<= cs * 8; - writel(priv->dc, &priv->base->dc); - - return 0; -} - -static void __ti_qspi_release_bus(struct ti_qspi_priv *priv) -{ - writel(0, &priv->base->dc); - writel(0, &priv->base->cmd); - writel(0, &priv->base->data); -} - static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable) { u32 val; @@ -186,15 +150,26 @@ static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable) writel(val, ctrl_mod_mmap); } -static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen, - const void *dout, void *din, unsigned long flags, - u32 cs) +static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { + struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev); + struct ti_qspi_priv *priv; + struct udevice *bus; uint words = bitlen >> 3; /* fixed 8-bit word length */ const uchar *txp = dout; uchar *rxp = din; uint status; int timeout; + unsigned int cs = slave->cs; + + bus = dev->parent; + priv = dev_get_priv(bus); + + if (cs > priv->num_cs) { + debug("invalid qspi chip select\n"); + return -EINVAL; + } /* Setup mmap flags */ if (flags & SPI_XFER_MMAP) { @@ -316,126 +291,6 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len) } #endif -#ifndef CONFIG_DM_SPI - -static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave) -{ - return container_of(slave, struct ti_qspi_priv, slave); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* CS handled in xfer */ - return; -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - ti_qspi_cs_deactivate(priv); -} - -void spi_init(void) -{ - /* nothing to do */ -} - -static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv) -{ - u32 memval = 0; - -#ifdef CONFIG_QSPI_QUAD_SUPPORT - struct spi_slave *slave = &priv->slave; - memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES | - QSPI_SETUP0_NUM_D_BYTES_8_BITS | - QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE | - QSPI_NUM_DUMMY_BITS); - slave->mode |= SPI_RX_QUAD; -#else - memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | - QSPI_SETUP0_NUM_D_BYTES_NO_BITS | - QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | - QSPI_NUM_DUMMY_BITS; -#endif - - writel(memval, &priv->base->setup0); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct ti_qspi_priv *priv; - -#ifdef CONFIG_AM43XX - gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio"); - gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1); -#endif - - priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs); - if (!priv) { - printf("SPI_error: Fail to allocate ti_qspi_priv\n"); - return NULL; - } - - priv->base = (struct ti_qspi_regs *)QSPI_BASE; - priv->mode = mode; -#if defined(CONFIG_DRA7XX) - priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO; - priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA; - priv->fclk = QSPI_DRA7XX_FCLK; -#else - priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x; - priv->fclk = QSPI_FCLK; -#endif - - ti_spi_set_speed(priv, max_hz); - -#ifdef CONFIG_TI_SPI_MMAP - ti_spi_setup_spi_register(priv); -#endif - - return &priv->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - free(priv); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs); - __ti_qspi_set_mode(priv, priv->mode); - return __ti_qspi_claim_bus(priv, priv->slave.cs); -} -void spi_release_bus(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs); - __ti_qspi_release_bus(priv); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n", - priv->slave.bus, priv->slave.cs, bitlen, flags); - return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs); -} - -#else /* CONFIG_DM_SPI */ - static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv, struct spi_slave *slave, bool enable) @@ -472,22 +327,21 @@ static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv, writel(memval, &priv->base->setup0); } - -static int ti_qspi_set_speed(struct udevice *bus, uint max_hz) +static int ti_qspi_set_mode(struct udevice *bus, uint mode) { struct ti_qspi_priv *priv = dev_get_priv(bus); - ti_spi_set_speed(priv, max_hz); + priv->dc = 0; + if (mode & SPI_CPHA) + priv->dc |= QSPI_CKPHA(0); + if (mode & SPI_CPOL) + priv->dc |= QSPI_CKPOL(0); + if (mode & SPI_CS_HIGH) + priv->dc |= QSPI_CSPOL(0); return 0; } -static int ti_qspi_set_mode(struct udevice *bus, uint mode) -{ - struct ti_qspi_priv *priv = dev_get_priv(bus); - return __ti_qspi_set_mode(priv, mode); -} - static int ti_qspi_claim_bus(struct udevice *dev) { struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); @@ -505,7 +359,14 @@ static int ti_qspi_claim_bus(struct udevice *dev) __ti_qspi_setup_memorymap(priv, slave, true); - return __ti_qspi_claim_bus(priv, slave_plat->cs); + writel(priv->dc, &priv->base->dc); + writel(0, &priv->base->cmd); + writel(0, &priv->base->data); + + priv->dc <<= slave_plat->cs * 8; + writel(priv->dc, &priv->base->dc); + + return 0; } static int ti_qspi_release_bus(struct udevice *dev) @@ -518,27 +379,12 @@ static int ti_qspi_release_bus(struct udevice *dev) priv = dev_get_priv(bus); __ti_qspi_setup_memorymap(priv, slave, false); - __ti_qspi_release_bus(priv); - - return 0; -} -static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev); - struct ti_qspi_priv *priv; - struct udevice *bus; - - bus = dev->parent; - priv = dev_get_priv(bus); - - if (slave->cs > priv->num_cs) { - debug("invalid qspi chip select\n"); - return -EINVAL; - } + writel(0, &priv->base->dc); + writel(0, &priv->base->cmd); + writel(0, &priv->base->data); - return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs); + return 0; } static int ti_qspi_probe(struct udevice *bus) @@ -648,4 +494,3 @@ U_BOOT_DRIVER(ti_qspi) = { .probe = ti_qspi_probe, .child_pre_probe = ti_qspi_child_pre_probe, }; -#endif /* CONFIG_DM_SPI */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 5a6080645a..37d058ebbc 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -120,12 +120,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x120000 #endif -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_SEL_GPIO 48 -#define CONFIG_QSPI_QUAD_SUPPORT -#define CONFIG_TI_EDMA3 - #ifndef CONFIG_SPL_BUILD #include #include diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 48999847ee..c14b010550 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -92,11 +92,6 @@ #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 /* SPI SPL */ -#define CONFIG_TI_EDMA3 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_QUAD_SUPPORT - #endif /* __CONFIG_AM57XX_EVM_H */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index ffe4a44c86..e4e37e5bbb 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -53,9 +53,6 @@ #define CONFIG_USB_XHCI_OMAP #define CONFIG_AM437X_USB2PHY2_HOST -/* SPI Flash support */ -#define CONFIG_TI_SPI_MMAP - /* Power */ #define CONFIG_POWER #define CONFIG_POWER_I2C diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7441f4a69d..f6be6595fe 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -72,10 +72,6 @@ #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_PHY_TI -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_QUAD_SUPPORT - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) @@ -98,7 +94,6 @@ #endif /* SPI SPL */ -#define CONFIG_TI_EDMA3 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index fa98efc24c..a5b1600c33 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1555,8 +1555,6 @@ CONFIG_QE CONFIG_QEMU_MIPS CONFIG_QIXIS_I2C_ACCESS CONFIG_QSPI -CONFIG_QSPI_QUAD_SUPPORT -CONFIG_QSPI_SEL_GPIO CONFIG_QUOTA CONFIG_R7780MP CONFIG_R8A66597_BASE_ADDR @@ -4400,7 +4398,6 @@ CONFIG_THUNDERX CONFIG_TIMESTAMP CONFIG_TIZEN CONFIG_TI_KSNAV -CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS