From: Stephen Warren Date: Tue, 13 Sep 2016 16:45:45 +0000 (-0600) Subject: mmc: tegra: don't use periph_id in pad_init_mmc() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=6138d5b6828ee8ebb36aef7302d3c171d87f3157;p=u-boot.git mmc: tegra: don't use periph_id in pad_init_mmc() The MMC driver will soon be converted to use standard clock/reset APIs, and so the periph_id field in the MMC device priv struct will disappear. Rework the implementation of pad_init_mmc() to rely on this; using the device register address is a much more direct test anyway. Cc: Jaehoon Chung Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 5e6cfe710a..4335431acc 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -451,14 +451,13 @@ static void tegra_mmc_set_ios(struct mmc *mmc) static void pad_init_mmc(struct mmc_host *host) { #if defined(CONFIG_TEGRA30) - enum periph_id id = host->mmc_id; u32 val; - debug("%s: sdmmc address = %08x, id = %d\n", __func__, - (unsigned int)host->reg, id); + debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)host->reg); /* Set the pad drive strength for SDMMC1 or 3 only */ - if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) { + if (host->reg != (void *)0x78000000 && + host->reg != (void *)0x78000400) { debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", __func__); return;