From: Haavard Skinnemoen Date: Fri, 20 Jun 2008 08:41:05 +0000 (+0200) Subject: avr32: Enable SPI flash support on ATNGW100 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5f723a3b98c630bde33de74351f2121691fdef14;p=u-boot.git avr32: Enable SPI flash support on ATNGW100 The ATNGW100 has 8MB DataFlash on board. Give users access to it through the new SPI flash framework. Signed-off-by: Haavard Skinnemoen --- diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index 375f0e7e17..f2c3e79799 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -60,6 +60,9 @@ int board_early_init_f(void) #if defined(CONFIG_MMC) gpio_enable_mmci(); #endif +#if defined(CONFIG_ATMEL_SPI) + gpio_enable_spi0(1 << 0); +#endif return 0; } @@ -89,3 +92,25 @@ void board_init_info(void) gd->bd->bi_phy_id[0] = 0x01; gd->bd->bi_phy_id[1] = 0x03; } + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include + +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA3 + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1); +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 3fc9975637..7ac51b543c 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -114,6 +114,8 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA @@ -126,6 +128,10 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_SPI 1 + +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_ATMEL 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32