From: Hans de Goede Date: Sun, 13 Sep 2015 15:16:54 +0000 (+0200) Subject: sunxi: Tweak various memory addresses X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5c965ed901c09bd046a99c7dc9269e3be2829604;p=u-boot.git sunxi: Tweak various memory addresses For the upcoming nand support we need a bigger heap, esp. ubi[fs] uses quite a bit of memory, increase the heap size to 64 MB. Our video code returns unused reserved framebuffer memory to the kernel before booting it. Drop the #ifdef-ery and simply always reserve 16 MB. Adjust bootm_size for the above changes. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 7c1507ba04..648e4e8656 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -145,8 +145,8 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ #endif -/* 4MB of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) +/* 64MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) /* * Miscellaneous configurable options @@ -275,11 +275,7 @@ extern int soft_i2c_gpio_scl; * The amount of RAM to keep free at the top of RAM when relocating u-boot, * to use as framebuffer. This must be a multiple of 4096. */ -#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 -#define CONFIG_SUNXI_MAX_FB_SIZE (12 << 20) -#else -#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) -#endif +#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -386,12 +382,12 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ /* - * 240M RAM (256M minimum minus space for the framebuffer), + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, * 1M script, 1M pxe and the ramdisk at the end. */ #define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0xf000000\0" \ + "bootm_size=0xa000000\0" \ "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \ "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \ "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \