From: Seung-Woo Kim <sw0312.kim@samsung.com>
Date: Mon, 4 Jun 2018 07:03:05 +0000 (+0900)
Subject: board: samsung: add missing line breaks for pr_err()
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5c890b1bc85af5cfb05916e360dc2919ec18ac12;p=u-boot.git

board: samsung: add missing line breaks for pr_err()

After the commit 9b643e312d52 ("treewide: replace with error() with
pr_err()"), there are some pr_err() with no line break. Add missing
line breaks.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
---

diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
index 9f6f654830..8c3a9ea564 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -164,7 +164,7 @@ int board_usb_init(int index, enum usb_init_type init)
 		samsung_get_base_usb3_phy();
 
 	if (!phy) {
-		pr_err("usb3 phy not supported");
+		pr_err("usb3 phy not supported\n");
 		return -ENODEV;
 	}
 
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index c9df7e69d9..05243fc896 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -456,7 +456,7 @@ void draw_logo(void)
 
 	addr = panel_info.logo_addr;
 	if (!addr) {
-		pr_err("There is no logo data.");
+		pr_err("There is no logo data.\n");
 		return;
 	}
 
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index 1c2bd01da2..552333fe86 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -428,7 +428,7 @@ int exynos_power_init(void)
 	};
 
 	if (regulator_list_autoset(mmc_regulators, NULL, true))
-		pr_err("Unable to init all mmc regulators");
+		pr_err("Unable to init all mmc regulators\n");
 
 	return 0;
 }
@@ -441,7 +441,7 @@ static int s5pc210_phy_control(int on)
 
 	ret = regulator_get_by_platname("VDD_UOTG_3.0V", &dev);
 	if (ret) {
-		pr_err("Regulator get error: %d", ret);
+		pr_err("Regulator get error: %d\n", ret);
 		return ret;
 	}
 
@@ -486,25 +486,25 @@ int board_usb_init(int index, enum usb_init_type init)
 
 	ret = regulator_get_by_platname("VCC_P3V3_2.85V", &dev);
 	if (ret) {
-		pr_err("Regulator get error: %d", ret);
+		pr_err("Regulator get error: %d\n", ret);
 		return ret;
 	}
 
 	ret = regulator_set_enable(dev, true);
 	if (ret) {
-		pr_err("Regulator %s enable setting error: %d", dev->name, ret);
+		pr_err("Regulator %s enable setting error: %d\n", dev->name, ret);
 		return ret;
 	}
 
 	ret = regulator_set_value(dev, 750000);
 	if (ret) {
-		pr_err("Regulator %s value setting error: %d", dev->name, ret);
+		pr_err("Regulator %s value setting error: %d\n", dev->name, ret);
 		return ret;
 	}
 
 	ret = regulator_set_value(dev, 3300000);
 	if (ret) {
-		pr_err("Regulator %s value setting error: %d", dev->name, ret);
+		pr_err("Regulator %s value setting error: %d\n", dev->name, ret);
 		return ret;
 	}
 #endif