From: Suman Anna Date: Mon, 29 Jul 2019 16:48:03 +0000 (-0500) Subject: configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLER X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5b56a4c162f64b5903063fe188a516848a7998b1;p=u-boot.git configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLER The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A72 U-Boot and SPL, so disable it from the j721e_evm_a72 defconfig. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL. Signed-off-by: Suman Anna --- diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 237dc6b601..917e33d683 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -28,13 +28,11 @@ CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_REMOTEPROC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y -CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -73,7 +71,6 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y CONFIG_TI_SCI_POWER_DOMAIN=y -CONFIG_K3_SYSTEM_CONTROLLER=y CONFIG_DM_RESET=y CONFIG_RESET_TI_SCI=y CONFIG_DM_SERIAL=y