From: Luka Perkov <luka@openwrt.org>
Date: Mon, 11 Nov 2013 06:27:53 +0000 (+0100)
Subject: kirkwood: define empty CONFIG_MVGBE_PORTS by default
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5aa2297da7f10e4ff231d33f18609396b40aa474;p=u-boot.git

kirkwood: define empty CONFIG_MVGBE_PORTS by default

Each board with defines it's own set of values. If we do not define
CONFIG_MVGBE_PORTS we will hit following error:

mvgbe.c: In function 'mvgbe_initialize':
mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared (first use in this function)
  u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;

This patch fixes above described problem.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
---

diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index 6ef6cacb6b..6b31a82ec4 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -35,6 +35,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_MVGBE_PORTS
+# define CONFIG_MVGBE_PORTS {0, 0}
+#endif
+
 #define MV_PHY_ADR_REQUEST 0xee
 #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)